bing tracking image
Q & A Icon

Brake Controller Install Recommendation for 2007 Isuzu NQR HD  

Updated 03/28/2019 | Published 03/27/2019

Question:

Can you suggest an one wire harness, or provide a wiring diagram for the NQR

0

Expert Reply:

Your 2007 Isuzu NQR HD is a box truck type vehicle that won't have a brake controller install connector available. You'll have to hardwire in the controller.

I do not know if your truck has a trailer connector of any kind or not so I will start from the beginning; installing a 4-Way connector. Since there are no custom fit harnesses listed for the truck you will want to use a universal hardwire kit # 119178KIT. I have linked the instructions for you.

Once you have that installed you can install a 4 and 7-Way installation kit # ETBC7. This provides the 7-Way, retains the 4-Way, and provides the wiring and accessories needed to install a brake controller.

The brake controller I recommend is the Prodigy P3 part # 90195 because this brake controller senses the amount of braking your tow vehicle is applying and puts a proportional amount of braking on the trailer's brakes. It also has a display that uses full words instead of codes that would have to be deciphered. It's our best selling brake controller because of how well it works, how reliable it is, and how easy it is to use.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>