Recommended 4-Way Wiring Harness for a 2024 Telluride SX X-Line
Updated 06/30/2026 | Published 06/24/2026 >
Products Featured in This Question
Question:
I have a 2024 Telluride SX X-Line. What wiring harness should I get that doesn’t require tapping into the headlights with the factory installed connection point?
asked by: Tyler H
Expert Reply:
Hey Tyler, thanks for the picture! The only wiring harness I have for your 2024 Telluride SX X-Line, is the Curt item # C29ZV. It installs behind the rear tail lights and provides you with a 4-way connector.
I linked an installation video below that will show you how to get it installed.
I'm not sure where that port is located in your picture but I don't have anything that will connect to a factory tow package on your Telluride if that's what it connects to.
What kind of trailer are you pulling and do you need a hitch as well?
You can add this information, along with any other questions you have, where it says Add Comment.

Jeremy
6/30/2026
I have a 2024 sx prestige x line. It has a some kind of factory tow capability because it has the dash button, but no prewiring that I know of. I used the curt hitch and wiring harness. It plugs into the taillight connectors like they say. Wiring harness works fine.

Dave U.
6/30/2026
I have a 2023 SX Prestige X-Pro and I was easily able to install the wiring harness by myself simply following the video. It was straight forward utilizing the existing connectors and simply plugging them to the jumpers on the harness. Determining the best path to run the line for making the jumper connection to the battery was the most difficult thing and even this was relatively easy.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2024 Kia Telluride
- Q&A: How to Determine Correct Curt 4-Way Wiring Harness For 2024 Kia Telluride
- Q&A: Recommended Tow Wiring Harness for a 2025 Kia Telluride
- Q&A: Recommended 7-Way Connector and Brake Controller for a 2024 Kia Telluride w/out the Tow Package
- Q&A: Recommended Hitch and Wiring for 2024 Kia Telluride EX Without Tow Package
- Q&A: 4-Way Wiring Harness for 2025 Hyundai Santa Fe HTRAC AWD
- Q&A: Trailer Hitch and Wiring Recommendation for 2025 Hyundai Santa Fe
- Q&A: Recommended 7-Way Connector for a 2024 Kia Telluride w/out the Factory Tow Package
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop
- Article: What Do I Need To Tow A Trailer?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: How to Choose the Right Trailer Hitch Class




Rov
6/30/2026
I also have a Telluride and I had an installer install this very Curt connector at the rear taillight. It works great and I couldn’t be happier.