Trailer Hitch and Wiring Recommendation for 2025 Hyundai Santa Fe

Question

Question:

2nd request , please respond. I need pricing on a class one trailer hitch and wiring harness for my 2025 Hyundai Santa Fe , SE

asked by: Eric G

0

Expert Reply:

Hey Eric, I am not seeing any other messages from you so I wonder if there was maybe a typo in your email address. But anyway for a hitch the etrailer part # e24ZV would be a great option for your 2025 Hyundai Santa Fe. Then for trailer wiring the Curt # C29ZV would work great too.

I attached links below with current pricing as well.

expert reply by: Jameson C

0

George

7/25/2025

I have a 2024 Santa Fe hybrid . I wanted to mount a hitch and 4 pin flat wiring Hitch I know is available What wiring setup do I use And I know the hybrid uses a lithium battery in the rear of the vehicle Thanks

Reply

Jameson C.

7/25/2025

@George The Curt 4-way kit part # C29ZV would be your best option for a 4-way for your 2024 Hyundai Santa Fe Hybrid. The battery wire of this would just run to the battery in the rear of the vehicle like you mentioned.

Reply

George

7/26/2025

@JamesonC Please put together instructions on house to install to a 2024 hybrid santafe

Reply

Jameson C.

7/27/2025

@George Curt has told us that the install process is exact same between the Kia Telluride and the Hyundai Santa Fe so while on a different vehicle I attached a link to an install video and instructions that cover the process. That said, let me know if what you have looks a lot different and I'll see if there's more info I can get from them.

Helpful Links

instructions.aspx?pn=c29zv

tv-install-curt-trailer-hitch-2024-kia-telluride-c29zv.aspx

Reply

Answer 1

Good question, Todd! I looked at some pictures we have of the Curt #C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in…

view full answer...

Answer 2

Your surge coupler will have either a sticker or an engraving on it, typically near where the coupler is located. If you can get me that information and what you're needing to replace on it I'd be more than happy to help you find what…

view full answer...

Answer 3

Hello Gregg, I think I can help shed some light on what is going on. Basically, there are two ways to stop surge brakes from actuating when backing up the trailer. The first and most popular way to do this is to use a surge brake actuator with a…

view full answer...

Answer 4

Hi Jerrod; the correct wiring harness for your 2025 Hyundai Santa Fe HTRAC AWD is the Curt T-Connector Vehicle Wiring Harness #C29ZV you were looking at. This will plug into the connection points in your rear cargo area and then a hot lead will run…

view full answer...

Answer 5

Yes, we do Anjali. To add a hitch to your 2025 Hyundai Santa Fe Hybrid, I recommend the Curt item #C37RV. This hitch is custom fit and bolts to your Hyundai with included hardware. It is a class III hitch with a 2" receiver so it will have the…

view full answer...

Answer 6

Hey Roger, Yes, the Curt Trailer Hitch Receiver #C37RV is listed as a fit for all models of the 2025 Hyundai Santa Fe. If you plan on installing this yourself then I recommend checking out Ryan's installation video below for step-by-step…

view full answer...

Answer 7

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 8

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 9

Hey Stephen, thanks for reaching out! For your setup I recommend picking up the etrailer Trailer Hitch Receiver #e45ZR and using the Curt T-Connector wiring kit for the basic 4-Way wiring. You'll need part #C93FV if you have an LX or S, OR the…

view full answer...

Answer 10

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…

view full answer...

Answer 11

Kia Tellurides are in our install shop all the time for hitch and wiring installs since Kia typically will not install them at the factory. Manufacturers use "tow package" as a buzz word to charge you more typically so you'll want to…

view full answer...

Trailer Hitch and Wiring Recommendation for 2025 Hyundai Santa Fe

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching