Titan Zinc-Plated, Leverlock Brake Actuator w/ Electric Lockout - Disc - Adjustable Ball - 7,000 lbs

Part Number: T47154207K

In Stock

$388.36

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

titan brake actuator boat trailer construction farm travel utility 1-7/8 inch ball coupler 2

titan brake actuator boat trailer construction farm travel utility disc brakes t47154207k

titan brake actuator boat trailer construction farm travel utility 1-7/8 inch ball coupler 2 t47154207k

titan brake actuator surge 1-7/8 inch ball coupler 2 t47154207k

titan brake actuator surge 1-7/8 inch ball coupler 2 zinc-plated leverlock w/ electric lockout - disc adjustable 7 000 lbs

titan brake actuator 1-7/8 inch ball coupler 2 disc brakes t47154207k

titan brake actuator surge disc brakes zinc-plated leverlock w/ electric lockout - adjustable ball 7 000 lbs

titan brake actuator surge boat trailer construction farm travel utility

Show All (14) Product Images

Show Fewer Product Images

Need help with installation?

Locate installers near me

Secure Leverlock system ensures that the coupler locks in place on hitch balls measuring 1-7/8", 2" and 50 mm, and the integrated electric reverse lockout lets you back up without activating the trailer brakes. Bolt-on installation. 1-800-940-8924 to order Titan brake actuator part number T47154207K or order online at etrailer.com. Free expert support on all Titan products. Great prices and Fastest Shipping for Titan Zinc-Plated, Leverlock Brake Actuator w/ Electric Lockout - Disc - Adjustable Ball - 7,000 lbs. Brake Actuator reviews from real customers.

All Info
Reviews (78)
Q & A (0)
Related Parts
Photos

Titan Brake Actuator - T47154207K

Features:

Hydraulic actuator synchronizes trailer brakes with tow-vehicle brakes
Electric reverse lockout lets you back up without actuating trailer brakes
- Built-in shield protects solenoid valve from the elements
Leverlock coupler mechanism ensures easy, secure connection
- Adjustable to fit 1-7/8", 2" and 50-mm balls
- Trigger latch is easy to use
Breakaway kit included
Zinc plating is corrosion resistant
Durable steel construction
Bolt-on installation
- Bolt holes 3" apart on center
Made in USA

Specs:

Application: disc brakes
Ball size: 1-7/8", 2" or 50 mm
- Some adjustment may be required
Mounting: 3" wide channel tongue
Capacity: 7,000 lbs
Maximum tongue weight: 700 lbs
1-Year warranty

When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward the rear of your vehicle. With surge brake systems, the actuator is triggered as your trailer moves forward while the tow vehicle slows. The actuator telescopes, applying force to its master cylinder, which in turn supplies the necessary hydraulic pressure to engage the trailer's brakes.

Electric reverse lockout with solenoid is automatically activated when you shift the tow vehicle into reverse. To use this feature, you must have a 5-pole flat, 6-way round or 7-pole wiring harness.

068-196-05 Titan Model 60 ZX7000 Leverlock Actuator for Disc Brakes - Solenoid Lockout and Cover - Zinc

Replaces 47154207K

4.6

78 reviews

5 Stars		(60)
4 Stars		(11)
3 Stars		(5)
2 Stars		(0)
1 Star		(2)

by: Carloyn C 08/28/2026

I needed this brake actuator to replace my original 36 year old worn out trailer brake actuator. This was an exact fit and is built better, stronger and will take 3 different trail ball sizes, unlike the original.
I got this hydraulic trailer brake actuator in two days, with free shipping.

Thank you.
Brian J

by: Isaiah 06/06/2026

Looks to be quality made! Trailer brakes work like a dream. Takes a fair amount of bleeding to get them right, but it doesn’t hurt to pump a full bottle of new fluid through the system. Don’t stop bleeding them until you see all the lines flexing with pressure.

by: James 08/02/2026

Was easy to install.
When attempting to bleed this surge actuator remove brake line put finger over outlet and pump up, release air and then you can proceed.

by: John 09/03/2026

Product is OK but packaging could have been better. The unit was a direct replacement for one i bought from you folks 14 years ago. some cost saving changes. Roll pins rather than bolts kinds of things. I combined some of my old unit's parts with the new.

by: Russell 10/27/2026

Looks like quality manufacturing. I am installing it today. I feel that it will be an excellent upgrade to my trailer.

by: Wayne 06/26/2026

Good customer service. Order arrived quickly.

by: Larry 03/09/2026

Exact fit to replace my old brake actuator. Had it installed in under twenty minutes. Thanks for the fast service.!

by: Craig 03/17/2026

Best price available and it was in stock. Fast shipping as well. Can't beat it.

by: John 06/09/2026

Replaced old unit with this one. Was an exact fit. Took about 10 minutes. No issues at all.

by: Douglas 03/20/2026

great customer service

by: Brett 03/30/2016

This place has the best customer service. They notified me that the item I order would be out of stock until a later date. We then chose another item and three days later which includes the weekend, I received my item. They extradite efficiently and are very friendly. I have always ordered my trailer parts from etrailer and will continue to do so in the future

Brett One Year Later

2/20/2018

I like the actuator better than the old one. Only thing that could be better on this from Titan would be 3 bolt through holes for Trailer tongue but then again I am in to overkill.

by: Bill Clarke 07/29/2016

Two of the wheel castings had dings on the edge of the seals fits had to buff them off. I removed the bearing cups that came with the rotors and replaced all the new Timken cups and cones. Installation went well and everything worked like it was written up. Thanks would buy again

Bill C. One Year Later

8/2/2017

The new brake system is working great. I should have changed them years ago.

by: Norm 10/25/2019 One Year Later

The brake actuator was easy to install and I have been using for about 1 yr. I often have trouble with the latching mechanism. When putting on the ball, the foot that grips the back of the ball doesn’t align resulting in either you having to raise and lower the trailer to get alignment or it can seem like it engages but actually has not. I have tried lubricant but it doesn’t help that much. I have to really look closely at how it is gripping the ball every time to make sure it is safely secured properly. It works but seems more finicky than my other hitches.

by: Steve O. 08/27/2019 One Year Later

Does the job but the claws that lock in under the hitch ball are finicky. I have to be careful to time the closing of the locking lever as I lower the actuator onto the hitch ball so that 1) the claws don’t grab the ball to early and seize until I reverse my direction and lift the actuator off the hitch ball, or 2) the claws aren’t too low such that they’re below the “shoulders” of the hitch ball and can’t clear them to lock onto the ball. Too soon or too late with the locking lever and I’m screwed! I’ve fiddled with the adjustment nut, but have not a setting to be fool proof. It does work, I just have to be careful with it. Also, the locking lever is pretty short not very comfortable to push or pull on so it’s hard to get good leverage.

by: JERAD 04/25/2019 One Year Later

My drum brakes locked up on me because it is a boat trailer and gets submerged in water. I hate drum brakes, due how many part are inside and can rust up. I am the 3rd owner of my 1998 boat trailer and it was hard to figure out what I needed to fix it. I contacted etrailer and they were super helpful, super informative and super easy to work with. I told them what I had, and what I wanted to do., and they put a package together for me and that was them. Everything was super east to install because it is all bolt on. I did have to do some cutting and grinding on my old tongue because the master was welded on. That was the only difficult part. My new setup is amazing and the disk brakes and new master make it feel like my boat is not even there. All in all, I am 110% satisfied and will definitely be a returning customer for any trailer needs. Thank you etrailer for making everything super easy.

by: John I. 11/11/2013

Product is fine. My old unit was 13 years old and I had to bore out the mounting holes on my trailer to allow clearance of the brake cylinder with the new one.
Product came with no instuctions which was an issue for me since the solenoid had two wires and my old one only had one. I assumed that one should go to ground.
I have not yet worked on trhe lines and brakes but I see no problem there.

by: Ron 03/30/2018

Fast shipping and very easy to install. This is my first time ever installing brakes on a trailer, and instructions were very easy to follow. The entire project was done in about 4 hours, including 2 trips to the store for supplies I should have had ahead of time (marine grease, brake fluid and bolts).

by: Richard 07/13/2018

This is not a direct replacement for Aero 6000. Getting brake line to unit is an issue with a folding trailer tongue. Will need to drill holes in trailer tongue for access to wiring and brake circuit. The brake reverse lockout solenoid was not installed and had damage to threads. I needed to hand work the threads to make it fit the master cylinder.

No instructions are available to help with installation.

by: Steve S. 08/14/2017

Prior to ordering my Titan Leverlock Brake Actuator, I contacted the support team to answer several questions that I had. Everyone was very knowledgeable about the products and very helpful. Once I had my answers, I placed my order and the product was at my house in 2 days. I was sent notifications when the product order was received, shipped and delivered. It was a great experience and the unit installed as advertised with no issues. I would recommend the product and etrailer.com. Thanks

by: Robert 09/22/2019

I purchased a Titan actuator to replace a Tie Down actuator which failed in less than 5 years. Same with the Tie Down disc brakes. I purchased the Titan because they are made in the USA. I am not sure but I think Tie Downs are made in China. I find that most things made in China are not well made and have a lot of defects.

by: Ray 05/11/2019

Very nice looking actuator. Just now putting it on.
etrailer folks are great to work with. I ordered the wrong one and they sent me a shipping label to send it back and the replacement arrived 4 days later.
Very nice experience!

by: Tom W 08/23/2015

The controller that came with the trailer was running the brakes too much and overheating the brakes. This one worked perfectly coming down out of the mountains with a 5,000 pound boat from a fishing trip. easy to install, too!

by: Glenn 05/16/2018

Great replacement for my old broken one.easy install.Good price.

Glenn S. One Year Later

5/17/2019

still working great after a year

by: Brian. F 09/16/2019 One Year Later

Costumer service was excellent, they made sure I had the right actuator for my trailer, probably would have picked the wrong item myself. Product itself is better than the original, seems more robust

by: Gerald D 11/11/2014

Arrived in super fast shipping time in excellent condition.
Item is what I expected from listing. The coupler is much better quality than original supplied with trailer. Looks to be a very simple install.

true

Show More Reviews

See what our Experts say about this Titan Brake Actuator

Do you have a question about this Brake Actuator?

Best Brake Option For Boat Trailer With Surge Brakes That Overheat and Drag On Steep Hills
The best option for your situation is to convert to electric over hydraulic with disc brakes because you have a brake controller to activate the brakes which gives you more adjust-ability on steep hills. Disc brakes cannot be manually adjusted however the brake controller gives you more control so the brakes do not stop as hard which should reduce the excessive heat buildup. They also have fewer moving parts compared to drum brakes so the maintenance is lower. To add electric over hydraulic...
view full answer...

Info for this part was:

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Brandon M

Expert Research:

Jeffrey L

Written by:

Lindsey S

Updated by:

Laura H

Updated by:

Wilson B

Updated by:

Alexander C

Updated by:

Hannah L

Updated by:

Matthew E

Updated by:

Eric H

Installed by:

Cole B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.