Features to know about

Built for Heavy Loads: 14,000-lb Capacity with 2-5/16" Coupler

This actuator is made for serious towing. With a 14,000-lb capacity and a 1,400-lb maximum tongue weight, it’s built to handle heavy trailers without flexing. The standard 2-5/16" heavy-duty coupler gives you a solid connection point, so the setup stays tight even under load.

Smooth Operation Every Time: Roller-Guided Telescoping Design

A unique roller design keeps the actuator moving in a straight line when it telescopes. That means less resistance and smoother braking as the trailer’s momentum pushes forward. The hydraulic system syncs naturally with your tow vehicle brakes, giving you confident, even stopping power on every trip.

Corrosion Protection That Lasts: Zinc-Plated Steel Housing

The zinc plating adds a strong layer of corrosion resistance that stands up to wet or salty environments. Whether it’s boat ramps or rainy job sites, the finish protects the steel body from rust while keeping it looking clean. The sturdy construction also helps resist bending if the trailer ever jackknifes.

Flexible Mounting: Adjustable Channel with Three Positions

The built-in adjustable channel has three different mounting positions so you can fine-tune the coupler height for your trailer setup. With 4" of vertical adjustment and a 3" wide channel tongue mount, it’s easy to dial in the right fit and get the trailer level behind your tow vehicle.

Added Safety on the Road: Built-In Breakaway Kit

A breakaway kit comes included for extra peace of mind. If the trailer ever disconnects, the system automatically engages the brakes to bring it to a stop. It’s a simple feature that adds an important layer of safety for any heavy load.