Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 20,000 lbs

See what our Experts say about this Dexter Brake Actuator

• Recommended Surge Brake Actuator For 17000lb Trailer
  To replace your current 16500lb actuator with a heavier duty option I recommend the Titan Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 20,000 lbs # T1521000 if your trailer has drum brakes, or the Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 20K # DM8204311 if your trailer has disc brakes. Both of the options have a 20000lb towing capacity which is the next step up from the 16500lb actuator your currently have, and both will fit...
  view full answer...
• Replacement Inner Coupler Slide for Dexter Axle Model 20 Brake Actuator
  To replace the inner slide on the Model 20 Dexter Brake Actuator # T1521000 you need the part # T1278800. The Titan and Dexter couplers are the same thing so this will fit even though the branding is different.
  view full answer...
• How to Remove the Master Cylinder Assembly on a Titan Model 20 Brake Actuator
  The master cylinder assembly on the Titan model 20 actuators, like # T1521000 as an example, is bolted to the inside of the actuator. Take a look at the picture I have included as an example. There are 2 bolts on each side holding in the assembly. Remove the bolts, the brake line, and the cap and the assembly should come out.
  view full answer...
  
• Surge Brake Actuator Needed That is Compatible with Drum Brakes and a 2-5/16" Hitch Ball
  If you are looking for a brake actuator that works with drum brakes and a 2-5/16" hitch ball then 2 of our most popular options are from Titan. We have a weld-on application with part # T1521000 as well as a bolt-on application with part # T2477600. These fit 3" wide trailer tongues and do not come with lockouts. I am also linking our selection of surge brake actuators with a 2-5/16" hitch ball that are compatible with drum brakes. Feel free to filter through the selection or send me a...
  view full answer...
• Titan Model 20 Drum Brake Actuator and Electric Lockout Recommendation
  We have what you need, but we don't have the exact part number you listed as it has been discontinued. You would want the part # T1521000 as it is a Titan Model 20 actuator and then for an electric lock out you would also need the # T4748800.
  view full answer...
• Need Welding Instructions for the Titan Model 20 Brake Actuator, # T1521000
  I spoke with my contact at Titan and his recommendation for the Titan Brake Actuator, # T1521000, was to weld in all areas where you have sufficient metal to metal contact. He did mention that you should stay 1/4 to 1/2 inches away from the master cylinder when welding. It is strongly suggested that all welding be done in a well ventilated area. Welding galvanized metal produces toxic fumes which are very hazardous to your health. If you have any uncertainties, I would consider contacting...
  view full answer...
• Connecting Brake Actuator With Electric Reverse Lockout
  If your brake actuator has electrical wires these indicate that your actuator has a reverse lockout function. The wires connect to your trailer wiring to activate this electric reverse lockout function. (This allows you to back up the trailer without causing the brakes to engage.) One wire connects to your trailer frame to serve as a ground (be sure to make a solid connection to a clean or preferably bare metal surface); the other connects to the reverse light wire on your trailer connector....
  view full answer...

Do you have a question about this Brake Actuator?