Use this hardware kit to mount your CE27610 roller guide-on on your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the replacement mounting hardware for CE Smith Roller-Style Guide-Ons. This hardware kit provides you with the items you need to replace the mounting hardware for your roller-style guide-ons on your boat trailer. The brackets are made from steel so they're very strong and durable. All the metal components have protective finishing on them to keep them safe from rust and corrosion.With this kit you get two pre-galvanized mounting brackets. You'll get two formed U-Bolts and two straight U-Bolts. You get two square caps, which insert into the top of each upright post.
And you get the required washers and locknuts for installation. Now, the brackets can be installed on top or underneath the trailer frame, whatever installation option works best for your application.The product is made in the USA. Few measurements to go over with you real quick, and then I'll show you the installation instructions. When it comes to these U-Bolts, the U-Bolts measure five inches from the bottom of this point here to the end of the threads, and then the distance between the posts, that's the threaded posts, looks to be about three and a half inches. That measurement was taken from inside edge to inside edge.
Each one would measure the same. When it comes to the brackets, these brackets measure about 4 5/8 inches long by 3 7/8 inches wide. Then the opening right here, that gives us a measurement of about 1 5/8 of an inch to 1 11/16 of an inch, right in that area.Again, really nice design, protective coating, keeps them safe from the elements. Right here's the installation instructions. I did mention that you have two form U-Bolts and two straight U-Bolts.
That's so that you can cross them like this application here. That's designed for two inch wide frames or you could run them straight like this one, which would be for a three inch wide frames. It does come with detailed installation instructions to walk you through the whole process step by step.That's going to do it for today's look at the replacement mounting hardware for CE Smith Roller-Style Guide-Ons.
Average Customer Rating: 4.9 out of 5 stars (87 Customer Reviews)
Use this hardware kit to mount your CE27610 roller guide-on on your trailer.Perfect for my 18 foot Klamath, I use it in the ocean for Salmon and cod. Salt water was causing mild pitting to my aluminum, trapped behind my old carpeted side bunks, I caught it in time and just hit it with a little sand paper. Didn't even know I had pitting it until I put my new roller style guides on. This product shipped fast, had all the hardware plus instructions. Fits 2 or 3 inch frame I have the 2" I bought 2 sets for my 18 foot boat. Excellent product, no doubt!
Lingcod - 04/02/2021The mounting hardware I purchased is my second purchase from Etrailer. I bought them to mount an Etrailer guide for my jetski hoist. High quality, timely order and fair price.
They look exactly like what I ordered. I wish I could give etrailer a review on their horrible shipping department. My order kept getting bumped back because I chose the cheapest shipping fee. I didn’t know that meant the warehouse and shipping personnel would also take their time getting my order sent…
Good experience. Got the hardware I needed to self repair my trailer. Thanks
Product was shipped exactly as described. Good quality materials that were easy to install. Looking forward to putting these bunk guides to work.
Great Product at a great price! Beats replacing the entire guide on!
Very well made. Exactly what I ordered. It took no time at all to get product delivered, fast and efficient. Customer service was exceptional. Product was easy to install and looks great. Thanks
This is a great product, used it for my kayaks
Item arrived today 12/28/22. Item was ordered 12/13/22. All parts were received and look very well made!
Adding upright guide-ons to the stern of my pontoon boat. These items will make the mounting job very easy to install.
Order was taken and shipped quickly. Wish they offered 6" bolts
A slightly wrong angle on a metal boat guide was received. A replacement part that was perfectly made was shipped and received in ND in less than a week. No hassles great response
Al C - 07/12/2021no problems
After many years of travel and loading in high winds, one of my clamps suffered a fatigue crack and had to be replaced. I use two sets of guide-ons on my trailer to help center my 22ft sailboat. With a double set, it only takes seconds to load.
A few days after making the order I received an email from etrailer indicating that there would be a delay in delivery until early next month and the items that I needed had to be shipped first from a manufacturer. I called the emailer to discuss but it was a Friday afternoon and I did not reach him. Later that evening I got an email from etrailer indicating that my order would be delivered within 5 days and it arrived on time as they said! Someone at etrailer must have gone the extra mile for me. It was much appreciated as I could not wait until next month. It saved me an expensive trip to the trailer dealer.
Tom N
Kit is great. I am replacing my brakets that have broken after 8 years of use. They say they are galvanized but to me they look like cold rolled steel. Time will tell. Maybe they just have a light coat. Great price.
Scuba K - 02/08/2019UPS lost my original order. Etrailer worked with me on my claim with UPS and after UPS paid the claim, etrailer promptly processed a replacement.
The square u bolts are short for my application. Will use on another project.
Sierra K - 07/21/2021The lady who helped me was knowable about the items I was looking for and had the order completed within minutes. I will reccomend you folks to all of my Fishing buddies. Thanks
Great product went on with no problems work like it's supposed to looks very good would purchase again
This was one of the most remarkable buying experiences. The deliver was set up immediately. Tracking my package with the link sent by etrailer was great as I didn't have to go to another site. My order came very quickly and the product quality was perfect. Any other parts I need for my boating experiences, will come from etrailer.
this replace the original parts so i hope they last as long. If you have friends that run into the bunk broads then they might break sooner.
Scuba K - 09/16/2020Nice kit, mounted up guide post with them. I painted all the pieces as zinc plating doesn't stand up well to salt water.
William - 06/21/2020The product was very sturdy and great. Unfortunately I can’t use it because I needed the clamps for the i-beam trailer and not this one. This was my mistake on ordering. I’ll just sell this one and purchase the correct clam kit for my I-beam trailer. Overall great quality and fast shipping!
Just what I needed at a great price and the shipping was super fast. etrailer is my one stop shop for all my trailer and hitch needs.
My order was correct and arrived in the time frame I expected. The items purchased worked as I hoped they would and I was safely towing my boat within three hours after receiving my order.
Thanks E-trailer
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.