Roller Shaft Dimensions for a 10" Keel Roller

Question

Question:

What size keel roller shaft do I need to fit a 10inch keel roller?

asked by: Glenn B

0

Expert Reply:

To fit a 10" keel roller like the CE Smith Keel Roller # CE29518 you will want the Roller Shaft with Pal Nuts # CE10726A. This 5/8" shaft is 11" long and comes with the 2 pal nuts to secure the shaft inside the brackets.

If you wish to add the Yates Endcap # YR135-5Y you will want to use a Roller Shaft with Pal Nuts # CE10727A that is 13" long to account for the additional length of the endcaps.

expert reply by: Bud M

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 3

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 6

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 7

Glad to hear you are liking the wheels, Wayne! With the lug holes being a bit recessed on the Kenda #KE22XJ you got, I recommend going with the DeeMaxx Trailer Wheel XL Lug Nut - Chrome - 1/2" - Qty 1 #DE23KR. This is 1-7/8" long and fits…

view full answer...

Answer 8

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Answer 9

Welcome back, Ian! With a 3,500 pound Dexter E-Z Lube using the #L68149 inner bearing, you will want the Bearing Buddy Spindle Grease Seal Set #BB60002. This does also include the seal as well as the wear sleeve and will fit your 3,500 pound Dexter…

view full answer...

Roller Shaft Dimensions for a 10" Keel Roller

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching