How to Identify Replacement Bearings & Seals for Magic Tilt Boat Trailer
Updated 05/21/2020 | Published 04/17/2017
Products Featured in This Question
Question:
I need wheel bearings for a 1999 magic tilt boat trailer model CDV 16 HW. Which kit is the correct one? Also does the YR1000Y roller have metal bushing all the way through the center?
asked by: Dale Y
Expert Reply:
The best way to confirm the correct replacement wheel bearings and seals for your 1999 Magic Tilt boat trailer is to pull one of the hubs and note the inner and outer bearing numbers and seal number. You can then directly search on those part numbers to find replacements. Trailer makers do alternate parts sometimes so even if you have the owner's manual and it says the trailer uses bearings X and Y, they may not be what is in the hubs. It is always best to check the existing parts.
We do package many of the more popular bearings and seals into kits like # BK1-150 but we also offer them individually. The linked photo shows you the typical placement and appearance of such parts numbers on bearings and seals. I linked you to our main page for trailer bearings and seals and to two helpful articles.
Yates Keel Roller # YR1000Y is 10-inches long and fits on a 5/8-inch diameter shaft - which is not included - but which we offer as part # CE10726A. This consists of the 11-inch shaft and two Pal nuts to secure the roller.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Video: All About the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Article: Aluminum, Galvanized, or Painted: Which is Best for Your Boat Trailer?
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Search Results: spindle cotter pin
- Search Results: cotter pin
- Search Results: cotter pins
- Search Results: 10~9 grease seal
- Search Results: trailer bearings races seals caps
- Search Results: l44643
- Search Results: 34823 seal
- Q&A: Replacement Inner And Outer Bearing With Seal For A 1998 Kwik Kamp Camper Trailer
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - DL21792 Review
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-150
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Trailer Wiring Diagrams
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: How to Find the Correct Idler Hub Replacement for Boat Trailer
- Q&A: Looking For Seals For 1982 Boat Trailer With 1.98" OD And 1.344" ID
- Video: Ultimate Overview of the Timken Replacement Bearing and Race Set
- Q&A: Bearing Kit Recommendation Using L44649 Inner And Outer Bearings
- Article: Trailer Maintenance Schedule
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Bearings Races Seals Caps
Ralph
5/18/2020
Need bearing set for a 1978 BT-15 trailer. L44543 (or L44543?) & L44643 (or L44642?). Hard to read #'s.