Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
A heavy-duty license plate bracket for use with stud-mount license plate lights. With zinc-plated all-steel construction, this bracket is extremely durable.
Manufacturer Cross Reference
Bracket will work as an exact replacement for:
Uni Bond # LH1000Z
Wesbar # 3203
Peterson # B428-09
Bargman # 30-72-100
Zinc plated steel license plate bracket, designed for durability. For use with stud-mount license lights.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to show you Optronics Trailer License Plate Mount Bracket, part number LP15SB. First off, with our bracket this is an all-metal construction. In its typical application, this license bracket is designed to sit behind the bracket that holds your taillight in place. In this case, we're on the driver's side or left-hand side. Typically they will line up with the studs on the lights. You can mount this either way you'd like, but typically you want this underneath so it sticks underneath the light on the bottom for the license plate. Let's go ahead and install it. Pretty simply.
Let's go ahead and remove these two nuts. Most of the time it's going to be a 7/16. In certain situations, it won't fit like this, so you can flip it around and install it that way as well. Of course, we realize that not as much light will go onto your license plate, but it will still work just fine. Then you can go ahead and install your license plate; 1/4" hardware will work just fine for that.
This hardware does not come with it as well. Since it is recessed inaudible 00:01:14 back, let's go ahead and turn off the lights and try it out and see how the trailer light illuminates the license plate. Even though it's recessed, it's still doing its job. That will finish it for a Optronics Trailer License Plate Mount Bracket, part number LP15SB. .
Average Customer Rating: 4.9 out of 5 stars (423 Customer Reviews)
Nice upgrade from original equipment
Standard bracket. Fits as advertised. Price was great!
Thanks for the prompt service and product is what I needed.
Much better than old the plastic Tag Mount bracket.
Made of heavy gauge material, zinc coating. Way better than the stock plastic OEM.
Can't beat the price, value, and quick convenient delivery!!!
Exactly what I wanted. What is more amazing was how quick the package arrived. Etrailer is a good retailer to deal with.
I've restored my 12 ft double axle trailer after it was damage in a fire. The trailer was restored and the finishing touches were supplies by e trailer. Fast and prompt delivery, Thx so mix.
I am completely confident that I'm not being taken advantage of. This business is awesome. I haven't yet asked for help but I would bet they would have the answer your looking for. Love the videos and grateful that you made them for everyone. If any requests, make a video on how to replace a spindle... Thanks
I was glad to find a solid zinc license plate holder for my trailer. I was very satisfied with the order and the product.
Received within a couple days of placing order, good communication from etrailer.com, good design, great price, expect it to last much longer than plastic.
Great replacement for the cheap OEM plate holders. Ended up working out better than I thought it would. Bolts directly where the plastic one did on a 5 x 8 Carry-On trailer. Painted it black to match the trailer. Looks like it came that way from factory.
The product I ordered is exactly as described, and meets my needs perfectly. The price is quite reasonable. I had looked for several months at local retail outlets to find a sturdy steel bracket but all I could find were the plastic variety. Plastic does not hold up well when exposed to constant rushing air (as in 65 mph on the Interstate). I am very happy to find a license plate bracket that will do the job without failure!
the zinc plated trailer license plate bracket is a 100% improvement over the flimsy plastic one that came with the trailer .I needed to make some adjustments to fit the trailer light but everything else was what I wanted
This is one of the best license plate brackets I have found for boat trailers. The metal helps keep lights grounded and is worlds above plastic in terms of strength.
I have been looking for this product for awhile to replace two flimsy plastic license plate brackets on trailers we own. In fact I recently lost a license plate due to a plastic one that broke on my utility trailer. I am amazed at the high quality and very low cost of this product. Placing the order on-line was super easy and I couldn't have asked for more reasonable shipping cost. It arrived much faster than I would have suspected. I would definitely do this again and appreciate your service. Etrailer is "top-notch" in my book!
Anyone that first buys a trailer knows that plastic license plate holder is flimsy.And sometimes you can lose your license plate.This is steel sturdy and well made
Very satisfied. It fits snug on the trailer and the plate attaches perfectly.
Exactly the license plate bracket I need for my trailer
It is a very nice tag bracket. Metal!
I have never went wrong with etrailer. This product was no different. Product is well built and sturdy. Fast shipping and would deninatley recommend it if you're looking for a trailer tag bracket.
Are you kidding? This metal license plate mount is rock solid and under $2. The holes are set up perfectly to fit the mounting bolts on my driver side trailer light and the position of the license plate when mounted allows it to be lit by the clear lens on the bottom of the trailer light when the running lights are on. Also, the bracket allows the mounted license plate (and frame) to just clear the rail of the flat bed trailer itself. Yeah, it's a perfect fit. Thanks, trailer!!
Very sturdy and did the job
I received my license plate brackets yesterday. I installed one of them on my boat trailer this morning. Installation was easy and it looks great. The license plate brackets are heavy duty and seem to be well manufactured. In the past, I have purchased lighter metal brackets and polymer brackets. Both of these types of brackets finally breakover a period of time and usage. Thanks for having a superior license plate bracket!
This part was perfect for my liscense plate for my trailer . Thanks
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike R.
3/13/2018
Not to good plate came undone and flew off my trailer . Had to buy another liscense plate .