Ultimate Overview of the Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel Video

An option is the Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover - 18' - 20' Long #CA80043. This has a cover height of 42 inches as you mentioned, but it also has a width of 88 inches and is made to work well with AC…

The measurement between the tail light mounting holes of the CE Smith Trailer License Plate Bracket #CE26053A is really 1-1/2 inches, that is correct. There is a good option for you, however with the Optronics License Plate Mounting Bracket #LP15SB…

A broken plastic license plate holder is unlikely to be repairable so you'll probably be best served replacing it with a sturdier corrosion-resistant unit like #CE26053A which is aluminum. It may be necessary to break off the remaining plastic…

Yes, we have the Uni-Lite LED Clearance and Side Marker Light with Grommet in both red and orange (or amber) colors. Here are the part numbers you'll need: - Red #MCL10RCKB - Orange/Amber #MCL10ACKB

The only difference between the Grease Seal #168233 and the Grease Seal #010-180-00 is that one is made by Dexter and one is made by Redline. Apart from that, they are the exact same and have the same inside/outside diameter.

The Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel #LP15SB is 1/16 inch thick. That makes it 16 gauge sheet metal. I've attached a photo with other dimensions that will most likely be helpful as well.

The Wesbar license plate bracket part number 003201 that you referenced is a universal license plate bracket just like the Optronics Trailer License Plate Bracket part #LP15SB. To see if the mounting holes would line up check out the dimension…

The Grease Seal part #168233 has a double lip so it can be used on a boat trailer and be submersed under water, yes. This is also the correct replacement for the NOK AD2527E Grease Seal that you have now.

For as trashed as those brake assemblies are I am impressed with how spotless that spindle is! Based on the bearing numbers you mentioned you have a #84 spindle and the hub part #AKHD-545-35-G-K is correct. Since this its galvanized it's a really…

So the Atwood 83000, 83005, 83010 brake actuators are obsolete, and Atwood is no longer in business so there isn't a replacement master cylinder. You'll need to replace the whole actuator, and for one like the Atwood with the same 8,000 lb…

I believe I have just the right license plate bracket for you. Take a look at the Trailer License Plate Mount Bracket, #LP15SB. It is just a little over 8 inches long at 8-7/16 inches. It is 4 inches tall. The center to center distance between the…

Hey Tom! The Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 will fit as long as you have a 12" x 4" rim. Moving from B to E is a pretty big jump, and that is going to be a light trailer even with the motorcycle on it. I am a…