Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb
(27 reviews)
Price: $126.97
In Stock
Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb
Item # DM15349-52
Retail:$149.20
Our Price: $126.97
You Save: $22.23
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (27)
- Q & A (0)
- Videos (1)
- Photos
Demco A-Frame Trailer Coupler - DM15349-52
- Channel Only
- Bolt-On
- 14000 lbs GTW
- Standard Coupler
- Demco
- 50-Degree A-frame channel mount coupler
- Does not include jack hole
- 14,000-lb Capacity
- Silver powder coat finish
- Made in the USA
15349-52 Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb
California residents: click here
Video of Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Demco A-Frame Trailer Coupler - Standard Coupler - DM15349-52 Review
Speaker 1: Today we're taking a look at the Demco 50 degree A-frame coupler. This is a channel mount design. Now this coupler installs onto your A-frame trailer, and provides attachment points for channel mount connectors, such as Lynette rings, a clevis, or a hitch-ball coupler. This unit features a capacity of up to 14,000 pounds. It is designed for 50 degree A-frame trailers. So, you'll see the design here.Now, I'm going to take a measurement.
The distance we have from this wall to the same point on the other side, and that's going to give us a measurement of, I'm going to saw about 11-5/8 of an inch. That's the span of that opening right there. This is a standard three inch channel bracket. Outside edge to outside edge, gives a measurement of 3-11/16 of an inch. I do want to point out that you will notice that it does not have a hole for a trailer jack.It is made from a very durable steel construction.
It's got nice bracing on it. Nice consistent welds. And it's coated with a silver powder coated finish, which is going to help resist rust and corrosion. It's a bolt on, or weld on installation. You'll notice that on each side, it does have three mount holes.
These all have a diameter of 5/8 of an inch. And they're separated on center by three inches. And then the adjustment holes, right here, are separated on center by two inches. They have a diameter of 5/8 of an inch as well.From the center of the top hole, to the center of the bottom hole, that has a distance of 10 inches, again, on center. That's going to do it for today's look at the Demco 50 degree A-frame coupler.
Again, this is a channel mount design, using a standard three inch channel bracket.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb - DM15349-52
Average Customer Rating: 4.8 out of 5 stars (27 Customer Reviews)
by: John K.03/21/2019
Product was perfect for our customers slightly odd need of a pintle on his utility trailer. Product is very sturdy and as advertised. Fit the frame angle perfectly. My customer is very happy with his trailer and that Demco had the solution to fit his need!
For our first transaction with etrailer I cannot say enough about their speed in shipping and volume of parts. Definitely will be using etrailer again in the future very soon!
by: Ryan12/13/2022
Purchased this coupler for use on a travel trailer-to-flatbed conversion. Been using it for a year now and I am extremely pleased with how it has performed and held up.
by: Mike 05/30/2023
great product and fast shipping fits perfect--thank you
by: B.McD10/29/2020
Great product, allowed me to use my ProPride 3P Hitch on a large car hauler that needed additional tongue clearance. Confidently towing every time now with my 3P Hitch!
by: Adam 08/15/2018
Very solid product. Thick steel and good welds. The only reason I didn't give it 5 stars is the lack of a hole for a jack. That's not a deal breaker for me but might be for some. The powder coated finish is a nice feature to keep it rust-free instead of just paint like most others. It should be plenty strong enough for my skidsteer trailer.
by: Jose04/13/2022
Very good product fast service thanks etrailer excellent customer service
by: Jim02/23/2022
PRODUCT JUST WHAT I NEEDED / SHIPPING DEPARTMENT NEED A LESSON ON PACKING BOXES WITH THIS KIND IF WEIGHT IN BOX.
by: David03/15/2022
Quality built, fast shipping. You get what you pay for! Totally worth it!
by: Corbin09/06/2021
Great for what I need it for but only 4 starts because the welds seem to be a bit in the cold side
by: Don 11/29/2021
GREAT COUPLER. COULD GET SHIPPED BETTER LIKE A BOX THAT FITS IT INSTEAD OF A BOX WHERE YOU KNOW PART OF THE ITEM IS GOING TO POKE HUGE HOLE IN BOX
by: Kenneth 09/22/2022
Works gr
by: Mike04/27/2018
Parts were just what we ordered, and service was even better! Everything arrived even faster than I expected. Thanks!
by: David 09/20/2020
Excellent product, arrived 1 day early.
by: Mitch 03/12/2020
This arrived fast! I have not installed it yet but the quality appears to be excellent.
by: Matthew 05/07/2023
by: Mike 10/04/2023
by: Antone11/16/2023
by: Eric 08/30/2021
by: Erik 09/26/2022
by: Keith 08/22/2022
by: Dany03/27/2021
by: Tommy 08/04/2022
by: Daniel 02/11/2021
by: Paul 05/04/2021
by: Robert 06/17/2021
25
27
Show More Reviews
See what our Experts say about this Demco A-Frame Trailer Coupler
- Can a Jack Hole be Added to an A Frame CouplerThe Demco 50-Degree A-Frame Coupler without Jack Hole part # DM15349-52 is not available with a jack hole. If you want to add your own hole to accommodate a jack that would be acceptable.
view full answer... - Can DM15349-52 Demco Coupler Mount Be Welded in PlaceAlthough it's intended to be bolted in place, the Demco # DM15349-52 coupler mount could certainly be welded instead. I've linked you to a product description video featuing the # DM15349-52 A-Frame coupler mount.
view full answer... - What Bolts are Needed to Mount Demco DM15349-52 Trailer CouplerThe Demco # DM15349-52 does not include mounting hardware. Demco recommends using grade 5 bolts, and the holes in the coupler are 5/8 inches in diameter. If you click the provided link, you can see a product demonstration video featuring the # DM15349-52 A-frame coupler.
view full answer... - Is There a Reason Demco 50-Degree A-Frame Coupler # DM15349-52 is SilverSilver is just the color that Demco likes for their couplers which is why the Demco 50-Degree A-Frame Coupler # DM15349-52 is that color. The two most popular colors are black and silver like this. Demco does offer a red primer version of some couplers like # 12660-97SP.
view full answer... - Will the Demco Slide-Lok Trailer Coupler Fit the Demco 50-Degree A-Frame CouplerYes, you will be able to use the Demco Slide-Lok Trailer Coupler - Adjustable Channel Mount - Zinc - 2-5/16" Ball - 12,500 lbs # D05557-95 with the Demco 50-Degree A-Frame Coupler # DM15349-52. The # D05557-95 is for 3" wide channels and has mounting holes that are 2" apart on center. Since the # DM15349-52 has a 3" channel and the same distance for the mounting holes these two will work well together. I have attached some video reviews for your reference.
view full answer... - Can the Demco DM15349-52 be Mounted in an Underslung Configuration?I spoke to Demco, and unfortunately the Coupler # DM15349-52 cannot be mounted to the bottom of a frame. They went on to say that there would not be enough surface area for it to handle the weight when welded or bolted on. That being said, the Ram 5-Position Adjustable Channel Bracket # CTA-CB6 is also rated up to 14,000 pounds and can be mounted however you need it to be. This would be a fully welded on part and would most likely need a few gussets added for structural integrity.
view full answer... - Can The Demco 50-Degree A-Frame Coupler # DM15349-52 Be Mounted On a Lets Go Aero Trailer? I reached out to Lets Go Aero for confirmation that you can even use the Demco 50-Degree A-Frame Coupler # DM15349-52 and they said that you will not have any structural issues with having the bolt holes drilled in the sides of your Frame as the Demco will require. Since the holes in the new coupler will not line up centered on your frame rails you will need to pad out the top of the frame 1/2" with some additional steel to center the bolt holes in the tube. You will need the Demco Trailer...
view full answer...
- How Does Bulldog Collar-Lok Coupler # BD028287 Work Differently than Other CouplersBulldog Collar-Lok Coupler # BD028287 and similar couplers have a sleeve that constantly puts pressure on the front of the coupler, the part that goes around the ball, so that it cannot come loose. There is also more surface area of the coupler making contact with the ball. Traditional couplers use what is essentially a wedge. The fit is predetermined and can me manually adjusted on some couplers by tightening or loosening a bolt or nut in the wedge/latch mechanism. This design can get...
view full answer... - Recommended Adjustable Channel for A-Frame TrailerThe Demco 6-Hole Adjustable Channel Bracket - Weld On - 12" Tall - 21,000 lbs # DM66134 is the weld on option for your trailer. There isn't a complete kit we offer, but it sounds like you are seeking the Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount # DM15349-52. You can then use a coupler like # CTA-400. If you want the support jack plate use # DL22763.
view full answer... - Recommended Spare Tire Carrier For Little Giant Let's Go Aero TrailerWith where you are wanting to mount your spare tire and not having it attach to the front panel, the Trailer Hitch Universal Spare Tire Carrier # 6715 is the only thing I can see working. You will need to attach a Receiver Tube # 337RT25808B to attach to the crossmember below the trailer to hold the carrier. This would be best welded onto the crossmember so that it is secured to the trailer. The Anti-Rattle Trailer Hitch Receiver Lock # 63232 will remove the play in the receiver and secure...
view full answer... - Is Lock N Roll Channel-Mount Coupler Compatible With Demco 50-Degree A-Frame Channel CouplerYes, the Lock N Roll channel-mounted coupler is indeed compatible with the Demco channel coupler; the two parts that are compatible are the following: - Lock N Roll Articulating Coupler - Adjustable Channel Mount - Trailer Side - 11K # 336TS502 - Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount # DM15349-52 The Lock N Roll has the correct channel width, bolt spacing, and bolt size to fit directly in the Demco coupler. So the two are absolutely compatible and will allow...
view full answer... - Recommended A-Frame Coupler That Can Use Different Attachment Options To VehicleI recommend the Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb # DM15349-52 which mounts to the a-frame on your trailer and has a channel which allows quite a few different mounting options like the Pro Series Adjustable-Channel Coupler w/ Low Latch - 2" Ball # PSA200S0303 or the Buyers Products Plain 7-Ton Cast Lunette Ring # 337B16137. There is not a coupler that has a 2" receiver like you mentioned.
view full answer... - Off-Road Hitch And Coupler Options For a Toy Hauler RV Travel TrailerTo connect your toy hauler RV travel trailer you with the Curt Lunette Ring # C48560 you will need to have a Trailer Nose Plate # 337TNP716625750 welded and gusseted in place of your current ball coupler. An easier option would be having a Demco 50-Degree A-Frame Coupler # DM15349-52 welded in place of your coupler. This coupler is rated for up to 14,000lbs and will require drilling for a A-Frame jack if your trailer requires that. Then you will be able to use the Lunette Ring # T1613700...
view full answer...
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.