Does Demco Coupler DM37ZR and DM15349-52 Use Same Mounting Holes
Published 09/16/2026 >
Products Featured in This Question
Question:
I currently have the Demco DM37ZR bolted onto my 22 trailer. Im thinking of switching to the Demco DM15349-52 without jack hole. My question is since my current one is bolted on, do both have the mounting holes in the same location? Same length apart? Obviously I already have holes drilled into the frame.
asked by: TOMAS W
Expert Reply:
Hey Tomas, the bolt pattern is the same between the Demco coupler part # DM37ZR you have now and the part # DM15349-52 you are wanting to go to so the hardware and holes would all be the same. The holes are 3 inches apart on center for both. Is this an equipment trailer?

Tomas W.
9/16/2026
What Demco coupler do you recommend to use to bolt to the 15349-52? I currently have a 2” on my current one but not opposed to going to a 2 5/16.

Product Page this Question was Asked From
Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Bolt-On
- 14000 lbs GTW
- Channel Only
- Standard Grade
- Demco
more information >
Continue Researching
- Shop: Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Can The Demco 50-Degree A-Frame Coupler # DM15349-52 Be Mounted On a Lets Go Aero Trailer?
- Article: Trailer Wiring Diagrams
- Q&A: Help Understanding and Achieving the 21K Weight Capacity of Demco Trailer Coupler # DM14040-81
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: Can DM15349-52 Demco Coupler Mount Be Welded in Place
- Q&A: How Many Additional Panels Can Be Added To The Rich Solar RV Solar Charging Kit RS37VR
- Q&A: Are Shackles Necessary For A Single Axle Utility Trailer?
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Trailer Lighting Requirements
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: How to Measure Your Trailer Wheel Bolt Pattern


Tomas W.
9/16/2026
It’s actually just a flat car trailer with wood deck. I moved my jack further back and welded it to the frame so I could drop my tailgate down without hitting the jack.