Replacement Dust Cap for Lippert 4,400 lb Trailer Axle

Question

Question:

Hi, I have a Jayco Jay Flight travel trailer with 4,400 lb Lippert Component axels, Item #: V000314462, one of the dust caps missing. What size of a replacement dust cap do I need? Thank you

asked by: Jason H

0

Expert Reply:

We've checked with Lippert in the past and for their 4,400 lb trailer axles the correct dust cap is the part # DC200L-DCRP that you referenced.

expert reply by: Jameson C

0

Answer 1

The Axletek 44-GG is a 10 inch by 2-1/4 inch 3,500 lb axle brake assembly which we offer with the part #AKEBRK-35L-SA.

view full answer...

Answer 2

Hey William, thanks for reaching out. Yes a spare hub is definitely a good idea. I can certainly point you in the right direction, but there isn't a way to look up your trailer to know exactly what hubs it uses. There isn't a universal…

view full answer...

Answer 3

Hi Todd! For the hub, the Lippert 126003 is a pretty standard 3,500 pound option, so that makes it easy to replace. The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased #AKHD-545-35-EZ-K will be a perfect…

view full answer...

Answer 4

Hello Tony, I really wish I had a database that tells me exactly what goes on each camper, but unfortunately, I don’t. Based on my research, you should have a 4,400-pound axle (you can double-check your axle tag to confirm). If it is NOT a Lippert…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

The replacement I recommend for an Atwood Surge Brake Actuator 85778 is the Demco Hydraulic Brake Actuator part #DM62VR. It has the same ball size, offers a bolt-on install, and has a greater capacity. The only difference is it has an electric…

view full answer...

Answer 7

Hello Phil! Sure can! The Lippert 3,500 lb axles use a standard brake size and bearing combination, so we can absolutely provide self-adjusting brakes and new hubs for that. Here is what I recommend: - etrailer Electric Trailer Brakes -…

view full answer...

Answer 8

From my research, the correct replacement for the UFP HD1377 hub/drum is the Trailer Hub and Drum Assembly part #AKHD-545-35-K or the Dexter 5 on 4-1/2 Complete Hub-and-Drum Assembly part #84546UC3. These hub/drums both use a L68149 (1.378"…

view full answer...

Answer 9

I reached out to Lippert and my contact was able to confirm that the hub bore on you 176207 4,400 lb axle is 2" which means you can use the Replacement Dust Cap #DC200L-DCRP or get it in a 2-pack as part #RG04-040.

view full answer...

Replacement Dust Cap for Lippert 4,400 lb Trailer Axle

Product Page this Question was Asked From

Continue Researching