Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Your Gatormade axle will need these brakes. The Dexter Electric Trailer Brake Kit - 12-1/4" - LH/RH - 8K, part #DX32QR, will fit your Gatormade Aardvark. These brakes are rated for axles rated for 8,000 lbs. I have included a product description…
view full answer...We only carry the Dexter Electric Trailer Brake Assemblies Left #DX25QR and Right #DX52QR for your Dexter axle. We do not carry the replacement lever, magnet or hardware separately for these brake assemblies.
view full answer...I think you might be talking about diameter but yes, a 215/75-14 trailer tire will have a slightly larger circumference than a 205/75-14 tire. Specifically, the 205 will have a circumference of about 82.582 inches whereas the 2015 will have a…
view full answer...The main difference between a radial ply and bias ply tire is how the tire is constructed. The cords underneath the tire are run in different directions. On a bias tire, the cords run at a 32 degree angle from the direction of travel and on a radial…
view full answer...If you have Peterson lights currently that look like the Optronics taillights part #STL008RB then the mounting brackets you have now will work just fine as these were made to be basically an exact replacement. We don't have any L-brackets though…
view full answer...You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…
view full answer...Yes, the Dexter Electric Trailer Brake Kit #DX32QR is the correct replacement brakes for your Big Tex with Dexter D80N Axles.
view full answer...I took a look at the online version of the owner's manual for your 2011 Ram 2500 and found a couple of fuses you will want to check inside the power module located in the engine compartment. There should be a 40 amp green fuse located in the J01…
view full answer...The Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side #STL8RB and #STL9RB has 16 gauge wires. You will want to use connectors like the Deka Butt Connector - 16-14 Gauge - Qty 5 #05731-5.
view full answer...The Dexter Electric Trailer Brake Assembly #23-429 & #23-428 have a center opening of 3-7/8" for fitting on the axle tube. It will mount to bolt holes that are 3-5/8" spread left to right and 4-3/8" top to bottom. I have included…
view full answer...Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…
view full answer...159 ft lbs of torque would be the torque figure needed when tightening the hardware that secures the Sleeve-Lock Trailer Coupler #CTA-296 to the channel.
view full answer...Filter Your Search
Contact and Help