Search: center caps   >  

Hello Ted. The Dexter Electric Trailer Brakes #23-47-48 use 14 gauge wire. We recommend using 10 gauge wire like part #10-1-1 which we sell by the foot. For a butt connector I recommend using part #05732-2. These are made for 10 or 12 gauge wire but…

We do have 4-Way flat to 4-Way flat extension adapters available, however they do not feature a coiled wire like you mentioned in your question. I recommend taking a look at the Hopkins 4-Pole Flat Wiring Extension #HM48235. This extension measures…

In order to obtain a trailer wiring harness with two vehicle side trailer connectors you will need to either splice two of the Hopkins Wiring Harness with 4-Pole Flat Trailer Connector part #HM48035 into one another with the Deka Heat Shrink Butt…

The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that will list the weight capacity. You can…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

You need to do a little more checking to be sure but I think we have what you need. Check your bearing numbers. If you have #L68149 for your inner and #L44649 for your outer then switching to a 5 on 4-1/2 bolt pattern is no problem at all. If your…

You are 100% correct! The closest match and best option to upgrade your 7.50-16 LT bias ply tires, is going to be an ST235/85-16 radial tire, like the Kenda Karrier #AM32743B you were checking out. This tire is pre-mounted on a 16 inch diameter by 6…

The Karrier ST235/85R16 Radial Trailer Tire - Load Range E, item #AM10295, is the closest tire to the 7.50-16LT tire that we have. Your tire has an overall height of 31.8 inches and a section width of 8.4 inches. This tire has and overall height of…

You need to measure the center hole of the wheel you have and then check out the link I attached which has all of the trailer wheel center caps we offer. You will need to select the center hole diameter that you have that matches the pilot size…

The slight gap you see is normal. The drum is not supposed to make contact with the brake mounting plate. There are some instances when mixing brands of brakes, hubs, and axles, that won't line up properly but in this case it is normal. I did…

Hello Bill, thanks for reaching out. The Taskmaster Trailer Wheel Center Cap #TA46QR may work for you, but I do not have a way to confirm this based on just the year make and model of RV. What I can tell you is this cap will work with 15" and…

Here is a list of the center caps which will fit the Vesper Steel Modular Trailer Wheel #TA52FR having a 4.25" pilot hole. Black Center Cap for Viking Series Wheels #CXF104B Chrome Center Cap for Viking Series Wheels #TA65FR Chrome Americana…