This bearing and race kit has everything to replace the bearings on 1 wheel of your trailer axle rated for 3,500 lbs. Works with Lippert, Dexter, or AL-KO 3,500-lb axles with #84 spindle.Kit includes inner and outer bearings and races, seal, cotter pin, and tang washer for EZ lube spindles. Works with Lippert, Dexter, or AL-KO axles with #84 spindles.
... Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer.Features: This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer Specs: L44649 Bearing inner diameter: 1.063" L68149 Bearing inner diameter: 1.378" L44610 Race outer diameter: 1.980" L68111 Race outer diameter: 2.361" Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
... Includes 10" zinc rotor, aluminum caliper, bearings, seals, Trailer Buddy cap, and hardware. Fits 1-3/8" tapered spindles. Order 2 kits to service one axle.Highlights Single-wheel kit: Services one wheel end only - order 2 kits for one axle Complete DB-35 package: For 3.5K axles with 1-3/8" tapered spindles Included bearings: L68149 inner and L44649 outer gives you what you need right in the box 10" Zinc rotor: Corrosion resistant for boat trailer use Aluminum caliper: Lightweight design delivers reliable braking power Trailer Buddy cap: Pressurized grease cap helps protect and service bearings Specs Coverage per kit: 1 rotor, 1 caliper, 2 bearings, seals, 1 Trailer Buddy cap, hardware Rotor: 10" diameter, zinc plated Caliper: Aluminum construction Bearings: Inner L68149 (1.378" ID) - Outer L44649 (1.063" ID) ; races L68111 Hub pattern: 5 on 4-1/2" Spindle fit: 1-3/8" tapered spindles Note: This is a single-wheel kit.
... Suspension units replace your existing axle and operate independently. 4" Lift spindle allows for maximum ground clearance. Fits any frame width.The trailing arm and integrated hanger attach the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting urethane bushings that never require lubrication. The EZ lube, 4" lift spindle (straight model shown) is simple to grease.
Hello Connie, thanks for reaching out. Yes, a modern ST205/75R14 is the current metric equivalent to the older F78-14ST size. The overall diameter and width are very close, so it is considered a direct replacement. With a GVW of 1,480 lbs and two…
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
Hey Dalton! The TowSmart T-Connector Vehicle Wiring Harness for Factory Tow Package #TS52SR fits the 2004 to current Colorado. However, this is designed for trucks that have a factory 7-way. If you don't already have a connector, check to see if…
From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…
Hey Lee, the pilot diameter of the Kodiak Hub Spacer part #HUBSPACER-910-99 is 4.88 inches. Its then 6.23 inches from the hub face to the brake flange.
Hello Keith, Congrats on the Skeeter! For your #84 spindle, you'll want the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle #BK2-100. If you don't mind spending a little more on higher-quality bearings,…
Hi John! Though you want the tires to match for consistent wear and stuff like that, the load rating being slightly higher on a spare will be perfectly fine. If it was a completely different size or a lower load range, I would be saying something…
Typically for installing oil bath hub seals you can set a wood block across it and use a hammer to push it in evenly. For a Dexter 12k axle the correct seal would be the part #10-56.
Yes, the Kodiak Hub Spacer for 9K and 10K Axle Item #HUBSPACER-910-99 is basically an idler hub that fits your Dexter 10k hub made after July 2009. For bearings and a grease seal, you can use part #28580 for the inner bearing, #25580 for the outer…
There is not a Cad drawing of the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter #TRU37FR available, but I did include a diagram showing all of the dimensions. It is recommended to have a an axle shop weld the…
The Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles part #8327812 measures 89" long between each hub face and 74" long between each spring center. It is not offered with 89" between each hub face and 70-1/2" long…
When determining if you need 10 inch or 12 inch brake assemblies there are a couple of easy things to check to confirm the fit for your trailer. The first thing is you can measure the diameter of your hub. The second thing is you can look at the…
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long, standard-height spindle maintains deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube spindle is simple to grease.
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 4" lift raises deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube, 4" lift spindle is simple to grease.
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long, standard-height spindle maintains deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube spindle is simple to grease.
Convenient kit contains everything you need to replace the bearings and seal on a single boat trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, and a cotter pin.Features: Kit lets you replace the bearings, races, and seal on 1 boat trailer hub Includes triple lip marine grade seal 171255UC for boat trailers Fits 1-1/16" to 1-3/8" tapered spindles Bearings Inner bearing: L68149 Outer bearing: L44649 Races Inner race: L68111 Outer race: L44610 Seal: 171255UC Seal I.D.: 1.719
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long, standard-height spindle maintains deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube spindle is simple to grease.
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 4" drop lowers deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube, 4" drop spindle is simple to grease.
Replacement grease seals fit a 3/4" straight spindle. Single-lip design helps keep water out and grease in.Features: Replacement grease seal helps ensure optimal performance from bearings and races Inner diameter 1.00" Outer diameter 1.781" Fits a 3/4" straight spindle common on trailers for jon boats, jet skis, and kayaks Includes 2 seals Use the Cross Reference to Match the Seal You Have Seal numbers are not always listed the same way across axle and hub brands, so the cross-reference data gives you another way to confirm the replacement before the hub comes apart.
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. ... Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Castle nut, tang washer, and D-washer included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 4-1/4" long Overall spindle length: 9" Brake flange configuration: 4 bolt Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU74FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 4.25" Round - E-Z Lube and Brake Flange
Get a better seal for your Bearing Buddy Protectors. This spindle grease seal set uses o-rings, neoprene seals, and stainless steel rings to eliminate grease leaks and keep your hub moving smoothly. ... Features: Maintains a smoothly operating grease seal system Reduces grease leakage caused by rough seal surfaces Lasts longer than typical grease seals by minimizing wear and tear Works with Bearing Buddy bearing protectors (sold separately) Bearing Buddy maintains grease pressure, ensuring smooth operation of ring and seal Constructed of high-quality, durable materials that can withstand high pressure Includes stainless steel seal ring; O-ring; neoprene, double-lip grease seal; and installation instructions Made in USA Specs: Application: trailer spindles with L68149 inner bearing and Bearing Buddy models with 1.810" hub bore Grease seal dimensions: Inner diameter: 1.875" Outer diameter: 2.360" Seal ring dimensions: Inner diameter: 1.377" Outer diameter: 1.875" Kit includes all parts necessary for 2 hubs Note: If your axle spindles already have permanent, stainless steel surface rings, you do not need this spindle seal system.
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner and outer bearings (LM67048), inner and outer races (LM67010), grease seal (16306A), and a cotter pin.Features: Kit lets you replace the bearings, races, and seal on 1 trailer hub Fits 1-1/4" straight spindles Bearings Inner bearing: LM67048 (1.25" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races Inner race: LM67010 Outer race: LM67010 Grease seal: 16306A Inner diameter: 1.5" Outer diameter: 2.32" Made in the USA
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 4" lift raises deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube, 4" lift spindle is simple to grease.
Replacement #42 E-Z Lube spindle welds onto your 5,200-lb to 7,000-lb trailer axle. Works with 25580 inner bearing and outer bearings with 1.25" inner diameter. ... Features: Straight spindle replaces a worn or damaged #42 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 5,200-lb - 7,000-lb trailer axles Stub diameter: 2-1/4" Spindle capacity: 3,500 lbs Overall spindle length: 11" Brake flange configuration: 5 bolt Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: varies depending on hub capacity (1.25" inner diameter) Races (sold separately) Inner race: 25520 Outer race: varies depending on outer bearing Grease seal (sold separately): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Note: Only works for grease applications.
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long, standard-height spindle maintains deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube spindle is simple to grease.
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing and outer bearing (L44649), inner race and outer race (L44610), grease seal, and a cotter pin.Features: Kit lets you replace the bearings, races, and seal on 1 trailer hub Fits 1-1/16" BTR spindles Bearings Inner bearing: L44649 Outer bearing: L44649 Races Inner race: L44610 Outer race: L44610
Replacement BT8 spindle welds onto your 2,000-lb trailer axle. Works with L44643 inner and outer bearings. Castle nut, washer, and cotter pin included.Features: Straight spindle replaces a worn or damaged BT8 spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 2,000-lb trailer axles Spindle capacity: 1,000 lbs Stub dimensions: 1-1/2" wide x 3-1/2" long Overall spindle length: 8-3/8" Bearing, Race, and Seal Information Bearings (sold separately): Inner bearing: L44643 (1.00" inner diameter) Outer bearing: L44643 (1.00" inner diameter) Races (sold separately): Inner race: L44610 Outer race: L44610 Grease seal (sold separately): 34823 Inner diameter: 1.25" Outer diameter: 1.983" Part Number Capacity A B C D E F Round/Square TRU97FR 1,000 lbs 1.50" 1.25" 1.00" 1.00" 1.00" 3.50" Square
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long, standard-height spindle maintains deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube spindle is simple to grease.
Filters
