Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Jeremy. I have a solution for you but the etrailer item #e85ZV is not going to work. It's a high low adapter that's only rated for flat towing setups. You can't pull a trailer with it. Instead you'll want to use the Gen-Y Hitch…
view full answer...The Draw-Tite Trailer Hitch item #DT42GR does not require any wiring to install on your 2023 Jeep Grand Cherokee. It is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver that has a 7,500 lbs…
view full answer...Hello Kenneth; since it sounds like you don't have the factory tow package you need the Curt T-Connector Vehicle Wiring Harness #C27BR. This plugs into the connection points behind your rear tail lights and will give you a 4-way to power your…
view full answer...Hey Don, welcome back! The Under-Bed Rail and Installation Kit #RP67KR for your 2024 F-350 matches the OEM prep package. You are not limited to Reese 5th wheel hitches. This can be used with the B&W Companion #BWRVK3300 and #BWRVK3305 or slider…
view full answer...We have ecerything you need! For the LM67048 Bearing, you'll need: -The Replacement Trailer Hub Bearing #LM67048, For the 25580 Bearing, you'll need: -The Replacement Trailer Hub Bearing #25580, For the LM67010 Race, you'll need: -The…
view full answer...Hey Steven! Thanks for the pictures and measurements. It looks like those are 1" wide with a 7/8" hole so the Blue Ox Off-Road Bumper Adapters #BX88357 will fit. The one thing you need to do is make sure that bumper is rated for flat…
view full answer...Hey Mark, thanks for reaching out, and congrats on the new camper! We have just the thing! Here is what I recommend: - Blue Ox SwayPro Weight Distribution w/ Sway Control for 2-1/2" Hitch - 15K GTW, 1.5K TW #BLU54TR The Blue Ox WD hitches are…
view full answer...The B and W Patriot hitch #BWRVK3200 is very similar to the B and W Companion hitch but instead it is designed to fit industry standard rails which are the more common rails you see installed in the bed of trucks. For a custom rail kit confirmed as a…
view full answer...This will vary depending on which style winch mount you are going to use with the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. Specifically if you are looking to install the Mopar style Warn winch on the factory steel bumper you would…
view full answer...The Smart Diode kit #RM47ZR you installed is designed for use with Gladiators that have ParkSense Proximity Sensors with LED lights. If you don't have these sensors or you have incandescent lights then that could be a possible cause for the…
view full answer...I do have almost everything you will need to repair your Roadmaster Sterling Tow Bar SN #005384 but after speaking with my representative at Roadmaster, they strongly advised me that you should replace the tow bar due to the sheer age of the unit and…
view full answer...The Blue Ox #BXW4000 will give you roughly 10 inches of clearance from the center of the hitch pin to the mounts on the shank, so you'll want to measure how much more clearance you need to actually clear the tailgate; in some cases it might be…
view full answer...