You're wiring up a breakaway system and need a switch you can trust. This one's simple. Mount it to the frame, connect the leads, and hook up the pin. If the trailer disconnects, it pulls free and completes the circuit to trigger the brakes.Specs Application: Use: for trailers with electric brakes and breakaway systems Cable Lengths: Wire leads: 7" long Construction: Housing: Plastic, sealed against moisture Pin: Spring-loaded with attached cable loop Warranty: 1-Year limited
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
This breakaway kit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately) while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Cable detaches from switch to apply the brakes Requires 12V, 5-amp-hour battery (3801250 - sold separately) Built-in charger automatically charges battery while connected to tow vehicle Battery box attaches to trailer in either a side-load or top-load configuration Includes convenient wiring diagram Durable, plastic case protects the battery (sold separately) from the elements Rubber O-ring seal keeps out moisture Switch and battery box install on trailer frame - drilling required Hardware not included Kit includes breakaway switch, 0.5-amp charger, battery box, and wiring Specs: Application: one-axle or two-axle trailers with electric braking systems Charger amperage: 0.5 amps Breakaway cable: 4' long
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Push-to-test button lets you check the battery's state of charge LED lights indicate current battery status Green = fully charged Yellow = charging Red = recharge needed Top-loading case is easy to access from above Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Wire loom neatly contains and protects wires Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
This complete breakaway kit brings your trailer to a safe stop by activating the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges the included battery while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Battery box can be mounted on your trailer frame so you can open it from either above or the side Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on the box Kit includes breakaway switch, 0.5-amp charger, 5-amp-hour battery, battery box, and wiring Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 0.5 amps Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 5-1/4" long x 5" wide x 3-1/2" tall 1-Year limited warranty
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Hey Dave, Usually, trailer tires are not balanced with weights like car tires because if the trailer weight changes it can cause the weights to vibrate off. So what trailer tire and wheel manufacturers will do is line up the heavy spot in the wheel…
Hello Jason, thanks for reaching out. Yes, the Kenda Karrier KR53 ST205/75R15 tire with 15" black aluminum wheel #KE58JV does come balanced from the factory. Trailer tire and wheel assemblies are balanced by matching the tire’s high and low…
I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for…
The equalizers that come with the Dexter Heavy-Duty Suspension Kit #K71-448-00 have bolt holes that measure 6" apart on center and then 4" tall on center as you can see in the attached photo. You'll want to measure your current…
We checked with Dexter and P-21 just indicates where the axle was made. With the serial number we could track down more info on your axle. However, in the mean time you could pretty easily get the bearing numbers off of your current bearings and then…
Hey Brian, if you check the tag on your axle that has the serial number you should see the weight capacity. If it's 3,500 lb then the brake assembly set part #AKEBRK-35-SA is correct for it. If you find something else let me know and I'll see…
The best trailer tire we offer for a 15 inch diameter wheel would be the Karrier tire size 225/75-15 part #AM10303 as this has a weight capacity of 2,830 max load at 80 psi, a speed rating of 81 mph. This size will easily fit as a replacement for…
Yes, it will. The Provider ST225/75R15 Radial Trailer Tire item #TTWTRTM2257515D is a load range D tire with a maximum load capacity of 2,540 lbs at 65 psi. What I really like about this tire is that it has a higher speed rating of 81 mph when…
Thanks for all the information Rene and welcome back! The Roadmaster Direct-Connect Base Plate Kit item #RM-521643-5 is exactly what you need for your 2021 Kia Soul with a manual transmission. It is compatible with your Falcon 2 Tow Bar item #RM-520.…
Hey Eddie, thanks for reaching out! It looks like you were already able to get the following parts in an order: - Roadmaster Direct-Connect Base Plate Kit #RM77ZR - Roadmaster Nighthawk All-Terrain #RM-676 - Smart Diode Kit #RM47ZR - Tow Bar Cover…
The AL-KO brakes can have a few different mounting patterns, so I recommend measuring to double check. I included a picture of how the Dexter #23-458-459 will measure to compare as well. Odds are these are correct, but it never hurts to double check.…
Dexter brake assemblies like the part #23-458-459 are essentially the best ones on the market. They use the best materials and and incredibly reliable and well-made. That being said the etrailer.com brand assemblies part #AKEBRK-7-SA are also very…
The battery case in this breakaway kit can clamp around your trailer frame or jack post. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket."Don't be intimidated by diodes: if you can strip and crimp wire, this installation will be no problem." Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Bring your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes a charger that maintains battery so you're always ready for an emergency and U-bolts so you can mount it to your trailer jack.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Use this trailer breakaway kit with your Dexter BrakeRite EHB or BrakeRite II electric-over-hydraulic actuator to bring your trailer to a stop should it become disconnected from your tow vehicle. Batteries connect in parallel.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
If you're tired of your breakaway switch cable dragging the ground or fraying, replace it with this coiled cable. Split ring lets you use this cable with any system. Easily attaches to tow vehicle with included carabiner.Features: Universal trailer breakaway cable fits any pin-style breakaway system Ideal for bumper-pull trailers Coiled breakaway cable won't drag on the ground No fraying or catching on things like straight cables do Woven steel construction offers excellent strength UV-protective coating boost durability and won't scratch your paint Easily attach cable to your tow vehicle with included carabiner clip Includes split ring to easily tether the cable to your plunger pin Specs: Length: 48" Ideal for bumper-pull trailers Limited 30-day warranty
... It easily attaches to your tow vehicle with the included carabiner. Includes switch plunger. Fits most pin-style systems.Features: Nearly universal trailer breakaway cable and plunger pin Replaces cables for Fastway, Bargman, and most other pin-style trailer breakaway systems Shorter length makes it ideal for utility trailers and campers Included carabiner clip lets you easily attach cable to your vehicle Coiled breakaway cable won't drag on the ground No fraying or catching on things like straight cables do Woven steel construction offers excellent strength UV-protective coating boosts durability and won't scratch your paint High-strength woven steel cable Sturdy nylon plunger pin Specs: Length: 48" Ideal for bumper pull trailers Limited 30-day warranty
If you're tired of your breakaway switch cable dragging the ground or fraying, replace it with this coiled cable. Split ring lets you use this cable with any system. Easily attaches to tow vehicle with included carabiner.Features: Universal trailer breakaway cable fits any pin-style breakaway system Ideal for gooseneck and 5th-wheel trailers Coiled breakaway cable won't drag on the ground No fraying or catching on things like straight cables do Woven steel construction offers excellent strength UV-protective coating boost durability and won't scratch your paint Easily attach cable to your tow vehicle with included carabiner clip Includes split ring to easily tether the cable to your plunger pin Specs: Length: 72" Ideal for gooseneck and 5th-wheel trailers Limited 30-day warranty
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on the trailer-end plug that can trap debris.
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on the trailer-end plug that can trap debris.
Use this connector to connect your trailer to your vehicle to power the trailer's brakes and lights. Built-in magnet creates secure connection with an EZ Connector vehicle-end socket (sold separately). O-rings create a watertight seal.With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on this connector that can trap debris.
Connect your trailer to your vehicle to power the trailer's brakes and lights. Built-in magnet creates secure connection with an EZ Connector vehicle-end socket (sold separately). O-rings create a watertight seal. Plug holder included.With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on this connector that can trap debris.
Use this 14-pin connector to connect your trailer to your vehicle to power the trailer's brakes and lights. Built-in magnet creates secure connection with an EZ Connector vehicle-end socket (sold separately). O-rings create a watertight seal.With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on this connector that can trap debris.
Connect your trailer to your vehicle to power the trailer's brakes and lights. Built-in magnet creates secure connection with EZ Connector vehicle-end socket (sold separately). O-rings create watertight seal with plug holder while plug is stowed.With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on this connector that can trap debris.
Filters
