How to Find if Dexter Heavy-Duty Suspension Kit Will Fit on Trailer

Question

Question:

Thanks, Jon. See attached photos. Mine is about 1.5” tall and 5.75” wide.

asked by: Scott M

0

Expert Reply:

The equalizers that come with the Dexter Heavy-Duty Suspension Kit # K71-448-00 have bolt holes that measure 6" apart on center and then 4" tall on center as you can see in the attached photo. You'll want to measure your current equalizers to see if they have similar dimensions or not. If they do then this is the kit for you. If they don't then just let me know what your measurements are and I can help you choose the correct replacement suspension kit from the linked selection.

expert reply by: Jon G

0

Dimensions of Dexter Heavy Duty Suspension Kit Equalizer
(click to enlarge)

Customer Image 1
(click to enlarge)

Customer Image 2
(click to enlarge)

Customer Image 3
(click to enlarge)

Scott M.

12/31/2021

Thanks, Jon. See attached photos. Mine is about 1.5” tall and 5.75” wide.

Jon G.

12/31/2021

Thank you for the information! Since that is the case you're going to need to go with the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers # K71-359-00 instead which measures 2" tall and 5-3/4" wide. These are close enough to your dimensions that this will work great as a replacement.

Answer 1

Hey Chase! Thanks for providing those measurements. The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-359-00 is the right kit for your Jayco Octane. This matches your existing equalizer and shackles strap dimensions, and the wet…

view full answer...

Answer 2

Hey Eric. Axle spacing isn't the best way to determine what replacement equalizers you need. The most accurate way to find a replacement is to match up a replacing equalizer as close as possible to the dimensions of the one currently on your…

view full answer...

Answer 3

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 4

Hey Roger, for your 2021 Coachmen Freedom Express LTZ Travel Trailer I recommend going with the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-359-00. This kit includes (4) 2-1/4" shackle link assemblies with 9/16" x…

view full answer...

Answer 5

I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for…

view full answer...

Answer 6

It sounds like the Replacement Shackle Link with Bolts #018-026-05 that you referenced is what you are needing. It comes with the shackle and wet bolts that have a grease zerk fitting installed on them. This kit is compatible with the following heavy…

view full answer...

Answer 7

Hello Jason, thanks for reaching out. Yes, the Kenda Karrier KR53 ST205/75R15 tire with 15" black aluminum wheel #KE58JV does come balanced from the factory. Trailer tire and wheel assemblies are balanced by matching the tire’s high and low…

view full answer...

Answer 8

Hey Dave, Usually, trailer tires are not balanced with weights like car tires because if the trailer weight changes it can cause the weights to vibrate off. So what trailer tire and wheel manufacturers will do is line up the heavy spot in the wheel…

view full answer...

Answer 9

Hey Shaun, we have the exact replacement for your equalizer with the #TREQ104. But for shackle straps we only have 2-5/8 inch shackles in a non-hd configuration like the part #115052. So what I would go with instead is the Dexter HD equalizer kit…

view full answer...

Answer 10

In order to determine which over/under conversion kit you'll need you will need to verify the capacity of the axles on your 2007 Jayco Jay Flight 31.5 BHDS, and that your springs are already not positioned over the axles. The best way to confirm…

view full answer...

Answer 11

Hello again Dave; the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-449-00 may fit your trailer but you will need to measure to be sure. When you replace shackle straps and equalizers you want them to match what you already have so…

view full answer...

Answer 12

We checked with Dexter and P-21 just indicates where the axle was made. With the serial number we could track down more info on your axle. However, in the mean time you could pretty easily get the bearing numbers off of your current bearings and then…

view full answer...

How to Find if Dexter Heavy-Duty Suspension Kit Will Fit on Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching