CURT Trailer Breakaway Kit
- C52028
- Kit with Charger
- Single-Axle
- Tandem-Axle
- Triple-Axle
- Battery Included
- Top Load
- CURT
- 5 Ah
- Electric
- Tester Not Included
- 48 Inch Long
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.
Features:
- Makes sure your trailer safely stops if it ever separates from your vehicle
- When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate
- Automatically charges battery with the built-in charger when connected to your vehicle
- Won't overcharge your battery
- Clamps around your trailer's frame or jack post
- Top-loading case provides easy access to battery from above
- Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately)
- Protects battery from rain and debris with durable, plastic case
- Lid can be secured with padlock (sold separately) to deter battery theft
- Includes battery, charger, battery box, breakaway switch, wiring, installation hardware, and breakaway cable
- Department of Transportation (DOT) compliant
Specs:
- Application: single-, tandem-, and triple-axle trailers with electric brakes
- Battery:
- Voltage: 12V
- Type: sealed lead acid
- Capacity: 5 amp-hours
- Breakaway cable length: 48"
- Breakaway switch:
- Dimensions: 4-3/8" long x 1-1/2" wide
- Lead wire length: 46-1/2"
- Charger lead wire length: 17"
- Battery box dimensions: 5" long x 4" wide x 3-1/4" tall
- Trailer jack mounting hole diameter: 2-1/2"
- 1-Year limited warranty
Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Quick Tips:
- When you store your trailer, be sure to keep the pin plugged into the breakaway switch. If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it.
- A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
52028 Curt Soft Track 2 Break Away System with Battery Charger and Metal Bracket
Installation Details 
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.