etrailer 4-Leaf Double-Eye Spring Complete Installation - Utility Trailer Video

Hey Jeffrey, welcome back, and thanks for providing all those specs - it really helps. We do have a replacement leaf spring for you. I recommend the following: - 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long #e22YR You will need…

Hi Lavana! The Onan Generator - Quiet Series 4000 EVAP Onboard RV Generator - 4,000 Watts - Gasoline #CM32ZR does need to have an external/auxiliary tank to tap into to operate (either just a tank like on a 5th wheel, or the gas tank on an RV). It…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for…

Hello Jason, thanks for reaching out. Yes, the Kenda Karrier KR53 ST205/75R15 tire with 15" black aluminum wheel #KE58JV does come balanced from the factory. Trailer tire and wheel assemblies are balanced by matching the tire’s high and low…

Hey Dave, Usually, trailer tires are not balanced with weights like car tires because if the trailer weight changes it can cause the weights to vibrate off. So what trailer tire and wheel manufacturers will do is line up the heavy spot in the wheel…

I can certainly point you in the right direction. We do have the #e22YR which is a 26" long 2,000 lb leaf spring. We also have the #e44SR which is a 25-1/4" long 2,500 lb spring. When replacing old leaf springs, it is critical that the…

For 1/2 inch trailer u-bolts that attach to axle the recommended torque value is between 45 and 70 ft lbs of torque.

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

You can mount trailer axles above or below the leaf springs. The difference is just the amount of ground clearance that the trailer would end up having. The biggest advantage with the spring below the axle (trailer will be lower) is that you would…

Yes, going from a 4 leaf to a 6 leaf spring would add slightly to your ride height. For example, if the current 4 leaf spring has 3/8" thick leaves, and you go to a 6 leaf spring with 3/8" thick leaves, you would be adding 3/4" of…

The equalizers that come with the Dexter Heavy-Duty Suspension Kit #K71-448-00 have bolt holes that measure 6" apart on center and then 4" tall on center as you can see in the attached photo. You'll want to measure your current…