Will the Dexter 23-105-106-09 Fit AL-KO 5200k Axles

Updated 03/05/2025 | Published 06/22/2021

Products Featured in This Question

Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles

(1629)

$345.92

Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K

(1731)

$259.58

Question:

I have a 2001 keystone Montana with the model T52 3 al-ko 5200lbs axles. They are a 12x2 electric brake with a 5 hole mounting pattern. I want to make sure that these will fit and if not what would be my best solution. Thanks

asked by: David P

Helpful Expert Reply:

The AL-KO brakes can have a few different mounting patterns, so I recommend measuring to double check. I included a picture of how the Dexter # 23-458-459 will measure to compare as well. Odds are these are correct, but it never hurts to double check.

If it does end up being different, let me know what measurements you get and I can see what I have available for you.

expert reply by: Lazer S

Standard 5 Bolt Pattern
(click to enlarge)

AL-KO Brakes
(click to enlarge)

AL-KO Axle Tag
(click to enlarge)

Tom S.

3/4/2025

Do you know if the 5 bolt flange pattern on the 23-458-459 is the same as the picture you posted with the dimensions? I have a 5200# Alko axle I would like to put self adjusting brakes on. Thank you

Lazer S.

3/5/2025

@TomS As long as the flange that the brakes mount to match the measurements above, you are good to go with the Dexter Nev-R-Adjust # 23-458-459. They are specifically designed for that bolt pattern. Looking into it, the part that was linked above ( # 23-105-106-09 ) doesn't match the bolt pattern in the picture for some reason. Not sure how that happened. I switched it back to # 23-458-459, which is the correct part number.

Tom S.

3/5/2025

@LazerS Thanks for the quick reply. I’m going to look at the measurements on my flange.