Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The interior lights of your trailer would be powered by the 12 volt accessory circuit on the 7-way of your 2010 GMC Sierra. You will want to check the 1:00 position of the 7-way on your truck with a circuit tester like part #PTW2993 to verify if…
view full answer...Hello Tim, Looks like you were on the right track. In order to have the 4 way and 7 way back there you will need to get the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #118273, and then also get the Hopkins…
view full answer...That's a good question, and in order to use the Curt Echo Mobile Trailer Brake Controller #C51180, it requires simply the 12 volt, ground, and turn signals be connected to the 7-way on your truck. So you will need the 12 volt connected that you…
view full answer...I do agree that the Tekonsha Wiring harnesses are the way to go. They tend to be the longest lived of the harnesses we offer, but the #118753 and #118781 for your 2022 Honda Odyssey definitely make it a little confusing. However, I am here to…
view full answer...With having a 4" round hole I recommend using the LED Trailer Tail Light #STL13RFHXB. This light is 5-5/8" round and will mount over the 4" hole you have. It includes wiring for the running lights as well as turn/brake signals. The…
view full answer...On the LED Trailer Tail Light w/ Reflector #STL13RFHXB the black wire is for the tail/running lights. The red wire is the brake and turn signal lights and the white is the ground. I have attached below a help article that covers the wiring on…
view full answer...Hey Ed, Typically the light cover will have some small indentation for you to stick a pry tool in and pop off the cover. You can see if there's an actual bulb in there or more likely just led diodes. If it's a bulb you can look at the base…
view full answer...The Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector #HS381-9000 you were looking at will work perfectly on your utility trailer even though it only has 6 wires. First things first I recommend verifying that the issue is on the…
view full answer...It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
view full answer...We can definitely get you all the parts needed to add brakes to your trailer, but it is going to be an extensive list since there currently isn't anything on the axle. I did include an article regarding just this kind of situation, but lets get…
view full answer...It's actually more simple than you think, but they don't make a 4/7 way connector for your 2013 Honda Pilot, so you will need to piece it together. To start, you'll need to use the Tekonsha #118265 kit for your 2013 Honda Pilot and then…
view full answer...To connect an electric brake controller to your 2010 Freightliner Cascadia, I recommend you start with a proportional brake controller like the Prodigy P3 #90195. This when connected correctly will give your trailer brakes the same pressure at the…
view full answer...Filters
6950 results
Vehicle Fit
Fit 2020 Winnebago Horizon Motorhome