To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. 90-Degree-angled connector fits into tight spaces.
Features:
Specs:
This T-connector wiring harness uses your factory tow package to add a 7-way socket in your truck bed while also retaining the use of the 7-way at your vehicle's bumper. The harness plugs into the back of your 7-way at the bumper and also into your factory wiring. And it provides 10 feet of cord to run the second 7-way connector to your truck bed. Installing a second 7-way connector in your truck bed makes it easy to connect the 7-way plug from your fifth-wheel or gooseneck trailer.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (563 Customer Reviews)
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. 90-Degree-angled connector fits into tight spaces.Installed this when I bought a truck camper. It was plug and play at the factory Ford end. I needed a 7-way at the front, driver's side of the bed for camper hookup. A little drilling and some hardware install and it works great at the front of the bed. I cracked the cover, no fault of Hopkins brand.
2013 Ford F250.
Easy install.
Installed on side of bed.
Won't have to worry about tight turns and pulling on the plug or pulling it out. It was previously mounted on the under the bumper.
Everything went together smoothly.
All parts and accessories were in the box, didn't need anything extra.
Had the entire install done in about 20 minutes.
Thanks for a super product.
Lance Camper owners, this plug can be used to tie in with the Lance 6-way plug when you are doing a self-install. I spent a lot of time on the phone with Lance, etrailer, and other companies trying to find a plug-n-play for the Lance 6-way. Don't waste your time like I did. Buy this harness, cut the end off that plugs into the 7-way at the truck bed, and run two 8 gauge wires for the 12 volt refrigerator directly to the battery. This harness will run over to the driver rear quarter panel, behind the rear wheels. The Lance 6-way will run from the truck bed, along the rear quarter panel, and end at the rear wheels. You will have to splice wires together for turn, tail, and backup. The colors don't match so you will have to use a test light to determine what each wire is once you plug in at the bumper end. The Lance owners manual clearly indicates wiring schematic for their plug. Using this kit will allow you to set your Lance 6-way up without tapping into OEM wiring system. Good Luck.
The Hopkins connector that plugs into the factory 7pin connector was full of water within the first month. This shorted the trailer wire harness and created multiple error messages on my dash!!!
Great product. Installation time was ten to fifteen minutes even with cutting the hole in the box. This is an excellent kit overall. The zip ties that came with it were a little small, so I used my own. It would be nice if the kit came with the ground screw. I would recommend this product to anyone. I installed it on my 2004 Chevy 2500 HD.
It's actually long enough! 2014 Ram 2500 crew cab long bed w/factory hitch, and I installed this plug in the *front* corner of the bed.
Have a truck camper, and its trailer plug is in the front left (driver's) corner. The cord is only about 2' long, so I needed to install a plug in the front of the truck bed. Before ordering, I measured from the factory plug at the trailer hitch over to the rear corner of the bed, then made a 90 degree turn and measured up the frame to the front of the bed. From there, took another 90 degree turn and went vertically to where the plug would hopefully be in the bed. About 12'. Since 10' is the longest I could find, I thought that perhaps I could run the cable more directly and shave off a few feet, and it ended up working. Far easier than custom building a wiring harness.
The final installation route went across the top of the spare tire to the back of the fuel tank, then along the frame until reaching the front of the bed. From there, it traveled up to where the new plug is installed in the bed. There were plenty of points along the way to secure the cable with zipties so it's neat and tidy and not apt to get caught on anything like the rear suspension or spare tire. The cable ended up having a bit of extra length, not much, but a little ... I was glad it wasn't pulled taut!
The install was simple and pretty painless. As others have noted, the zipties that come in the package are a bit too small to really be useful.
Arrived quick and installed it today. I bought the ten foot due to using it for a truck camper. Installed on my 2021 Chevy 3500 dually (8 foot bed).
Easy to follow directions and I was able to run it all the way up the driver's side to the new location.
Scariest part was cutting a hole into my brand new truck.
I sprayed the hole with spray bed liner to coat the edges that were just cut. It comes with metal screws that I sprayed black also.
Took about an hour to install.
This is a great harness! I had my doubts because it was quite a bit cheaper than the others for my 2020 F250, but the quality is just as good as the other guys. everything plugged up to my factory harness and gave me another plug inside the bed for my 5th wheel. I gave it 5 stars because it was easy, everything you need ( - the hole saw and drill) Its plug and play, don't get no easier than this folks.
Piece of cake install after reviewing some [online] videos. Approximately 1 hour to install. Did the install on a 2019, Dodge Ram, 2500, Bighorn. 2 1/8” hole bit did the trick for mounting in the bed, and dropped the spare tire to run the wire harness. Did come with dielectric grease for the connections!
Great product. Fifth wheel hitch 16411 with slider 16521 on 2015 Silverado 2500. Everything lined up good.
Perfect replacement for the one in my 13 ram 3500. No cutting or splicing. Plenty of wire to mount anywhere you like.
After a nervous ride home on my first trip I thought I had something wrong on my trailer, until the next time and it was something different
This Time I had to figure it out. It ended up being the connections in the molded plug end nothing I could repair I had to replace with new harness different brand..
All problems went away
Very easy install on 2021 F250! All you need is a drill, a 2-1/8" hole saw, and a driver for self-tapping screws. Dropping the spare tire makes the job easier, but wasn't necessary.
Easy install, simple plug and play but I could never get it to work. Ended up unplugging and running the trailer cord over the tailgate.
This product was very easy to install and fit my 2020 Ram 2500 even though other sellers said it would only fit up to a 2018 or 2019 Ram. The price was also better than other large online sellers. I certainly recommend this if you're looking for a 5th wheel/gooseneck hitch 7 plug in bed outlet.
Couldn't be any easier to add a plug in the bed for 5ht wheel or gooseneck use!!
This wiring harness is great, it is easy to install with no problem. I installed it within an hour.
Great product easy install plug n play. Installed on 2011 Chev 2500 hd to pull 5th wheel trailer plugged over tailgate when first bought but got extremely tight on turns and almost unplugged from truck installed in bed of truck no worries now would highly recommend. Great price also 20.00 dollars cheaper than RV store
Easy to install and works perfectly. If you haul a gooseneck trailer this is a must. Keeps the trailer wiring in the bed of the truck and not draped over the tailgate where it can get caught on something.
Easy install, works as designed, works with the trailer brake controller
Use it with our truck to tow our fifth wheel trailer.
I had one on my Tundra and it worked perfectly, not so lucky with my 2018 F-150. The plug I installed in the side of the bed doesn't work. Having said all that, I'm pretty sure the problem is mine not Hopkins. The bumper outlet works and getting the bed outlet to work simply hasn't been a priority.
Absolutely no guidance for if you have a Ram 2500 with the rambox.
Product plugged right into the truck with no problems. Had extra long wiring cord. Didn’t have to worry about not having enough to place where I wanted it.
Every order from etrailer has been perfect. Everything fits, everything works. Always fast delivery.
I bought this for the length and the fact that it had a pair of USCAR connectors on a 10 foot cable that I could customize for my purpose. Finding a harness that gives me all 7 wires and could be modified to use on my van just wasn't available. This ticked the boxes and was reasonable too.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.