How Can I Get a 7 Way and 4 Flat on the Back of My 2020 Nissan Pathfinder SV 4WD?

Updated 02/10/2025 | Published 02/07/2025

Products Featured in This Question

Hopkins Endurance Multi-Tow 7-Way RV and 4-Way Flat Trailer Connector - Vehicle End

(64)

$27.82

Question:

I have a 2020 Nissan Pathfinder SV 4wd. I am looking for a 7 way and 4 way wire harness kit? I have the hitch already

asked by: Tim

Expert Reply:

Hello Tim,

Looks like you were on the right track. In order to have the 4 way and 7 way back there you will need to get the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118273, and then also get the Hopkins Endurance Multi-Tow 7-Way RV and 4-Way Flat Trailer Connector - Vehicle End # HM40950. It would be nice if the # 118273 had the 4 flat and 7 way on the connector, but the only way to have both is to purchase the # HM40950 separately.

What are you looking to tow with the pathfinder?

expert reply by: Kate F

Tim

2/10/2025

I don't have the factory tow package.

Kate F.

2/10/2025

@Tim Yes, I understand that. The Pathfinders already come equipped with the factory tow package which is why you just need the pigtail wiring instead of needing to install something the like # etbc7 which would require running a power line from the battery, some amps, and run a brake line, Nissan already did that for you without putting the connectors on the back. If you look at the install instructions and go out to the Nissan you will see the connector is there.