You plug in once and know it will handle whatever trailer you hook up next. It keeps your setup simple so you can switch between jobs without stopping to rethink your wiring.Highlights Dual Connector Design: Supports both 7 blade and 4flat trailer plugs. Plug-In OEM Fit: Connects directly to factory wiring without splicing. Flexible Housing Build: Adapts within tight mounting or bumper spaces.
Easily connect either a 7-way or 4-way trailer-end connector with this dual-outlet socket. Simply plug this into your vehicle's OEM USCAR wiring system and mount it with the included bracket.Features: Provides a 4-way and 7-way socket for your trailer connector Fits USCAR-equipped vehicles with factory tow plugs 4-Way flat output connects tail lights, brake lights and turn signals 7-Way RV blade socket adds reverse lights, electric brakes and auxiliary power Rubber gasket keeps moisture and debris out Spring-loaded dust covers keep connectors clean when not in use Pre-greased terminals offer a reliable connection Mounting bracket lets you attach socket to your hitch or bumper High-strength steel has durable, gloss black powder coat Mounting screws included 1-Year limited warranty
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. ... Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded (see wire configuration below) Attaches to your hitch with included mounting bracket and hardware Includes durable, molded-molded, standard female output socket Specs: Harness length: 60" Bracket dimensions: 1-3/4" tall x 2-3/4" long Bolt hole spacing: 1-3/4" center to center Maximum amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
... It gives you both 4-flat and 7-way outputs, ready for whatever pulls into the driveway.Mounts to Bumper or Bracket: Secure, fixed installation at the vehicle end. Weather-Resistant Housing: Helps protect against moisture and road grime. Features to know about One Mount, Two Trailer Plug Options This TowSmart ProClass socket gives you both 7-blade and 4-flat outputs from your existing 4-flat wiring.
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Features: Provides both a 7-way RV-style and a 4-pole flat trailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible with 5-pole and 6-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point behind rear bumper Plug in connector Includes mounting bracket and hardware Comes with protective covers for connectors Assembled in the USA Limited 1-year warranty Installation This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Attach this electrical bracket to your 1-1/4" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connector to your hitch quickly and easily Holds (1) 4-way or 5-way flat connector Fits 1-1/4" x 1-1/4" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Specs: Overall dimensions: 5-1/4" wide x 2-7/16" tall x 1" deep Diameter of mounting hole: 1-3/4"
Hey Steven, thanks for reaching out. If you want to add a brake controller to your 2023 Sprinter 2500 without doing any cutting or splicing, the best option for that is the following: - Redarc Tow-Pro Link Bluetooth Brake Controller - Off-Road Mode -…
Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…
Hey Andreas, thanks for all the information! The Redarc Tow-Pro Link item #RED57AR is by far the best way to add a Bluetooth brake controller to your 2014 VW Touareg. It works with trailer's that have up to four braking axles. There's no…
Hey Richard, yes the the BAK tonneau cover part #BAK85VR is for sure a fit for your 2000 Chevy Silverado 2500 long bed. Does your truck have the round or square front end? The Silverado generally has the rounder look whereas the C/K was more square.…
Hey Richard, yes the Blue Ox Apollo part number BX7470P is the same as our part #BLU43QV. We change the part number just to organize it better in our system. This tow bar will also work with both base plate kits you mentioned part #BX1633 and…
With the arms straight on the Blue Ox Avail Non-Binding Tow Bar #BX7420 the arms will measure 24-1/4" when retracted and 34" with them extended. That measurement is taken from where the arms connect to the stinger all the way to the pin…
I cannot say for sure how you can tell whether or not you have the converter on your Highlander but I can help you out with the trailer harness installation. The only sure way to tell which harness you need is to check out what wiring you have in the…
Thanks for the picture of the front end of your 2015 Jeep Wrangler Unlimited, based on that we know that the Draw Tite front hitch part #65069 is a confirmed fit and will work well. I attached an install video for this hitch for you to check out as…
To replace your AL-KO 568303 seal you will want the Oil Seal #91030. This seal has the same inner diameter of 2.750 inches and outer diameter of 3.779 inches. It is a confirmed fit for your #99 spindle that uses the AL-KO 568303 seal.
There was definitely a short somewhere on your brake output circuit. A bad ground would just cause the circuit to not function. I attached a help article that covers everything on testing brake magnets. It is possible that when you were replacing the…
Curt trailer wiring harness #C55353 is not a powered converter so it does not require a direct connection to the vehicle battery. It draws all the power it needs from the vehicle tail light wiring. I have included a link to the installation…
You're correct, in order for the trailer taillights to function properly, you'll need to use a trailer wiring harness with an inline converter. We do indeed have the taillight converter you're needing, part #C55353. The harness is pretty…
You switch between trailers and want less hassle. One connector at the vehicle keeps hookups quick so you can plug in and go without hunting for parts.Highlights Dual Sockets: 7 Blade and 4Flat in one connector. Vehicle-End Connector: Plugs available at the vehicle side. Full Signal Support: Brake, turn, tail, electric brake, auxiliary, reverse, ground.
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.Features: 7- and 4-Pole trailer connector with mounting bracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Includes mounting bracket for easy, snap-in socket installation Black, epoxy-coated steel construction Mounts to bumper with included screws Specs: Application: Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs Can be used to add a connector to 2003 and newer GM pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Attach your trailer connector mounting bracket to your vehicle. Simply bolt this sturdy steel bracket to your trailer hitch, bumper, or vehicle's frame. Use with a no-drill mount (18136 or 18140) for an even easier installation.Features: Attaches to trailer hitch to provide mounting point for 4-Way flat trailer connector Provides space necessary to mount large trailer connector Installs directly to your hitch, bumper, or vehicle's frame Works with no-drill mounting brackets (18136 or 18140) for even easier, reversible installation Installation hardware is not included Durable steel construction Black powder coat finish resists corrosion 1-Year limited warranty Specs: Overall dimensions: 2-1/4" wide x 1-3/4" tall x 1-1/4" deep Diameter of mounting hole: 1-5/16"
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connectors to your hitch quickly and easily Holds (1) 6-way or 7-way round connector and (1) 4-way or 5-way flat connector Fits 2" x 2" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Dimensions: 10" long x 3-1/4" tall Edge is 1-5/32" at widest point Specs: Overall dimensions: 10-1/2" wide x 3-1/4" tall x 1-1/8" deep Diameter of mounting hole: 2-1/16"
Magnetic mounting bracket holds up your 4-pole flat trailer connector to prevent your plug from dragging on the ground. Strong magnet keeps bracket tightly attached to your hitch. ... Features: Mounting bracket lets you secure your 4-pole flat trailer connector (sold separately) to your vehicle's hitch Lifts plug up off the ground to prevent it from dragging while you're not towing Rare earth magnet keeps bracket firmly attached to your hitch Install bracket in seconds - no drilling required Remove or reconnect to your hitch without hassle Low-profile design - no unsightly mounting tabs hanging off your hitch Heavy-duty composite material is corrosion free Made in the USA Specs: Dimensions: 2-1/2" tall x 1-7/8" wide x 1/2" thick Limited lifetime warranty
Bracket for 4-way flat trailer connector mounts to your trailer hitch or vehicle bumper and provides a sturdy, fixed location to easily connect your trailer wiring.Features: Bracket mounts to your trailer hitch or bumper to provide a sturdy location to hold your 4-pole flat trailer wiring connector Hardware not included Black color Specs: Opening dimensions: 1-5/16" long x 1/2" tall Distance between mounting holes: 1-3/4"
Attach this electrical bracket to your 2-1/2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connectors to your hitch quickly and easily Holds (1) 6-way or 7-way round connector and (1) 4-way or 5-way flat connector Fits 2-1/2" x 2-1/2" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Specs: Overall dimensions: 10-5/8" wide x 3-3/4" tall x 1-1/8" deep Diameter of mounting hole: 2-1/16"
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connector to your hitch quickly and easily Holds (1) 4-way or 5-way flat connector Fits 2" x 2" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Specs: Overall dimensions: 6-1/8" wide x 3-1/4" tall x 1-1/8" deep Diameter of mounting hole: 1-3/4"
You're ready to hit the road, but your trailer's 4-pole or 5-way flat plug doesn't match your vehicle's 7-way blade socket. Instead of rewiring, simply plug in this adapter and get moving.Features to know about Quick Conversion with No Tools This plug-and-play adapter converts your vehicles 7-way RV blade socket into a 4-flat or 5-flat trailer connection. Just plug it in! No rewiring, mounting bracket, or tools needed. The snug fit holds tight while towing and removes easily when you're done.
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers keep connectors clean when not in use Split loom keeps wires contained and well protected Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mounting bracket secures wiring to the vehicle or trailer hitch 1-Year limited warranty Specs: Distance between bracket mounting holes center to center: 2-1/4" Harness length: 17" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers are dirt and weather-resistant Split loom keeps wires contained and protected from the elements Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mounting bracket secures wiring to the vehicle or trailer hitch 1-Year warranty Specs: Distance between bracket mounting holes center to center: 2-1/4" Harness length: 10" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
... Instead of swapping harnesses or using sketchy adapters, you mount this dual-socket connector once. It gives you a 7-way and a 4-flat in one spot, ready for whatever you're towing next.Highlights Dual Outputs: Includes both 7-way blade and 4-flat sockets in one connector. Vehicle-End Replacement: Installs at the bumper or mounting bracket. Hardwire Setup: Designed to be wired directly into your vehicles system.
Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector Plugs into the vehicle's factory plug behind the bumper and provides a 7-way and 4-way trailer connector hook-up Includes the 3 relays required to activate the wiring harness 2004-05 Nissan Titans only require 2 relays Mounting bracket and installation screws included Trailer connectors and mount bracket snap together
Quickly and easily install a 6-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Features: Provides both a 6-way round and a 4-pole flat trailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible with 5-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point behind rear bumper Plug in connector Includes mounting bracket and hardware Comes with protective covers for connectors Assembled in the USA Limited 1-year warranty Installation This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Tow a trailer with either a 7-way or 4-way plug with this dual vehicle-end connector. Included pigtail harness hardwires into your vehicle and the connector end mates with the 7-pole socket to form a weathertight seal.Features: Dual connector lets you hook up to a trailer with either a 7-pole, RV-style plug or a 4-way flat plug Pigtail harness hardwires into your vehicle and connects to 7-way socket Includes color-coded 7-wire leads and 1/2" convoluted tubing Forms weathertight seal on back of socket to keep out moisture and prevent corrosion Rubber gasket provides excellent weather protection Integrated stainless steel spring lets you easily open and close socket covers High-impact ABS plastic construction is extra durable Sturdy steel mounting bracket installs on bumper with included screws Black epoxy coating resists rust Specs: Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year warranty Wiring Configuration Wire Color Circuit Wire Gauge Red Left turn and stop 14 Gauge White Ground 10 Gauge Blue Electric brakes 12 Gauge Green Right turn and stop 14 Gauge Black Battery 12 Gauge Brown Running lights 14 Gauge Yellow Reverse lights 14 Gauge
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery. Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery. Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
Filters
