Result: Hitch Step

Hey Tyler, congrats on the new truck! The RetraxPRO XR Hard Tonneau Cover item #RTT-80383, you were looking at, does indeed fit the 6-3/4' bed model of the 2025 Ford F-250. A TruXedo Elevate Rack System is definitely going to be compatible with…

Hello Kent, thanks for reaching out. Do you already have a 7-way plug on the back of your sprinter? If not, you can use the Tekonsha OEM Replacement Vehicle Wiring Harness #TK82VR to add one. This kit includes everything you need to add a 7-way…

Hey Paul, so your 2024 motorhome built on a Ford Cutaway chassis does have a 7-way at the rear and brake controller install wiring under the dash so all you'd need is the part #TK99UR which comes with the P3 brake controller and the correct…

Hey Gray, the Westin Grate Steps part #W98RX has a weight capacity of 300 lbs.

I ran out to the warehouse and took some measurements of the Carr Hitch Mounted Step for 2" Trailer Hitches #CARR183252 and got the following measurements depicted below. Closed: Center of first hole: 3-3/8" Center of second hole:…

Hey Len! The kick sensor will continue to work with the Curt #C26VV installed on your 2025 Grand Highlander. What typically happens is the area right around the receiver is blocked but you really don't want to kick your foot at the receiver…

Thanks for your question, Jeff. That’s a great question, I wish I had a definite yes or no for you! Based off our demo video of the Thule ReVert rack #TH83VA on a 2021 Chevrolet Silverado 1500, we weren’t able to fully open the tailgate. The tailgate…

Unfortunately that 12 pin rectangular plug has nothing to do with the trailer wiring harness. To add a 7-way and 4-way connector to your 2023 Chevy Express Cargo van you're going to need to buy two separate harnesses. The reason for this is that…

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75956 you were looking at for your 2021 Lexus NX 300 has a built in mount to connect the trailer connector to which you can see in the included pictures. If you have a…

For a 2016 Ram 2500 the correct Curt front hitch is the part #C31015 and not the part #C31067 that you referenced. I checked with Curt for this hitch and there are no fit exclusions for the diesel engine models. This hangs below the front air dam…

The WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step for 2" Hitch part #WT81BS1XL should not interfere with the backup camera or reverse sensors on a vehicle. We aren't able to test this for every vehicle obviously but in most…

Hey Craig, thanks for reaching out. For starters, the Curt #C26VV is th correct fit for the 2025 Toyota Grand Highlander, as long as you do not have the dual exhaust model. We have sold quite a few of these Curt #C26VV hitches for the Grand…