Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Rene, thanks for reaching out. As far as the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2570, the leaf springs breaking is not something we see happening. I have been working here at etrailer since 2019 and I have never heard…
view full answer...Hello Jim, The Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K #FTJ120W0301 is rated for 1,200 pounds. Keep in mind that this rating applies to the tongue weight of the trailer, not the overall trailer weight. For…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.
view full answer...Hey Kyle, thanks for reaching out! You'll need the etrailer Electric Trailer Brakes w/ Dust Shields #AKEBRK-10 for your 10K Lippert axles. Are you also needing to swap out the hub/drums?
view full answer...Hey Ron, good to hear from you! How long are your current U-Bolts? The U-Bolt Kit #APUBR-8 could potentially work as it has 7" long U-Bolts, but it really boils down to what you currently have. For something longer we have the MORryde U-Bolt Kit…
view full answer...Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
view full answer...The exact bolt replacement you need is the part #LC126197 which is the correct length and diameter plus has the zerk fitting on the end of the bolt as well.
view full answer...Hey Robert, To find your offset you'll need to measure from the mounting surface of your lugs to both outer edges of your current wheels. A negative offset will move the tire further away from the trailer while a positive offset brings the tire…
view full answer...From what I was able to determine, your CR 21352 grease seal is a Chicago Rawhide 21352 and should be a double lipped seal with a 2.125" ID and 3.376" OD. To replace a seal of that size you'll want to use the #GS-2125DL, which has the…
view full answer...I do have a potential solution for you, but we do not offer a surge brake actuator designed to fit over a 4" channel. Your best bet would be to use a weld on actuator like the Demco #DM8759922, which can be welded to the top of the tongue.…
view full answer...Hey Michael, thanks for reaching out about the Trailer Valet MV PRO Trailer Dolly #TV96FR! Yes, you will place your electric drill in one mode for forward motion and in reverse mode for backward motion. Trailer Valet tried to make it as simple and…
view full answer...