Replacement Wet Suspension Bolt Recommendation for Montana Trailer with Lippert Correct Track
Updated 04/08/2019 | Published 04/06/2019 >
Products Featured in This Question
Question:
Hi, I recently ordered part # 34007-187-00 Step Wet Bolt for 1-3/4inch Double Eye Springs Order #107652563 as a replacement for a failed spring bolt on my tandem-axle Montana with OEM Lippert Components Correct Track, which came equipped with wet bolts. Unfortunately the ordered part is slightly too short. Its usable length is 2-1/4inch from just under the head to the shoulder where the threads start. I need a bolt thats 1/2 inch longer, which is 2-3/4inch usable length, to accommodate the Correct Track plates on each side of the spring hanger. Other than the length, the dimensions of the ordered bolt are perfect. Unfortunately I cant seem to find any wet bolts of 2-3/4inch usable length. Can you help me locate wet bolts of this length? The attached picture shows the too-short wet bolt next to a correct length dryinch bolt.
asked by: Mark M
Expert Reply:
The exact bolt replacement you need is the part # LC126197 which is the correct length and diameter plus has the zerk fitting on the end of the bolt as well.
Product Page this Question was Asked From
Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3-3/8 Inch Long
- Lippert
more information >
Continue Researching
- Shop: Lippert Trailer Suspension Wet Shoulder Bolt - 9/16" x 2-13/16" - Qty 4
- Shop: Lippert Trailer Suspension Shoulder Bolt - 9/16" x 2-5/16" - Qty 4
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: disc brakes trailer brakes
- Search Results: trailer suspension parts
- Search Results: air bags
- Search Results: morryde uo12~016
- Search Results: mopeka
- Search Results: go power overlander
- Search Results: cre3000
- Q&A: Will MORryde X-Factor Fit With Lippert Center Point Air Ride Equalizer?
- Video: Installing the Curt T-Connector Vehicle Wiring Harness on a 2020 Mazda CX-9
- Video: How to Install: etrailer Trailer Hitch Receiver on your 2022 Mazda CX-9
- Video: Curt T-Connector Vehicle Wiring Harness Complete Installation - 2021 Mazda CX-9
- Video: What to Know About the Replacement Wet Shoulder Bolt
- Shop: Trailer Hitch
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Bushing for a Lippert Road Armor Equalizer
- Shop: Trailer Wiring
- Shop: RV Interior Lighting
- Shop: Suspension Enhancement
- Q&A: Recommended Replacement Actuator For Fulton A50 On 2007 EZ Loader Trailer
- Q&A: Availability of Replacement Parts for Fulton A50 Drum Brake Actuator Coupler
- Q&A: Wet Bolt that is Long Enough to be used with Correct Track Lift Kit
- Q&A: Replacement Wet Bolt For a MORryde Suspension Upgrade Kit with 2.25" shackles
- Q&A: Comparing The Curt # C32NR and Hopkins # HM40978 Mounting Brackets


