According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Dutton-Lainson jacks are manufactured right here in the US and are actually really good quality. The mount used by your current Dutton-Lainson jack wouldn't be compatible with the Fulton F2, which leaves you with a couple of options. You could…
Based on the picture you submitted the matching trailer jack we have to what you have is the Dutton Lainson part #DL22800. I attached an install video for you to check out as well. At the very worst you may have to use the bolt on brackets that come…
I spoke to a technical contact at Midwest Industries and he advised that they use 800-lb-rated trailer jacks supplied by Dutton-Lainson. I contacted Dutton-Lainson and found the 800-lb jack referred to uses replacement pull pin kit #DL22449. This kit…
I wouldn't worry about the trailer not having fenders. I've pulled a few enclosed trailers that were missing fenders and it didn't affect anything that I noticed. If you get a puddle or it starts raining the tires will fling water so it…
Hi Baer; since the #AKHD-550-35-K came pre-greased there is no need to add additional grease at this time. These come with the right amount of so they're ready to go once installed. However, if you want to add some extra grease it won't hurt…
The 5 means that the wheel is 5 inches wide from bead to bead (not overall width). The J indicates the design of the wheel bead seat but it is nothing you need to be concerned with as this is the most common shape for all trailer tires. To measure…
Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…
Hello Don, Congrats on the new 2027 Keystone! There is one thing I do not try to do, and that is make sense of the pricing these manufacturers come up with! The reason I say that is because, at this time, it will actually save you money to get the…
The P-15 model information you provided for your Dexter axle does indicate its model, but you will still need to note its length and capacity before locating the correct replacement. If you are able to find a longer serial number somewhere on the…
I contacted the manufacturer with the information you provided about your axle. They were able to confirm that you have a Dexter #10 Torflex axle on your Wells Cargo Trailer. The correct lift kit for a Dexter #10 Torflex axle is the Torflex Lift Kit…
Filters
