What Do I Need to Add 8 Tire Linc Pro Sensors to a Prepped Keystone Montana?

Question

Question:

This package includes a docking station. my 2027 Keystone Montana 3100rl has a docking station already wired and mounted in the lower front near the batteries, all I have to do is take of the cover and plug in the repeater. All I need is the repeater, 8 sensors, and a moniter. How much would the cost be for these items as listed. Thanks Don Thornton

asked by: Don T

0

Expert Reply:

Hello Don,

Congrats on the new 2027 Keystone!

There is one thing I do not try to do, and that is make sense of the pricing these manufacturers come up with!

The reason I say that is because, at this time, it will actually save you money to get the Tire Linc Pro TPMS for RVs and Trailers - 6 Tire Sensors w/ Repeater # LC87VC, add the two extra sensors with the Tire Sensors for Tire Linc TPMS - Qty 2 # LC97VR, and then add the LCD Display for Tire Linc Pro RV TPMS w/ Charging Cord # LC27VC.

The other option would be to buy four sets of the Tire Sensors for Tire Linc TPMS - Qty 2 # LC97VR, the Tire Linc Pro Repeater # LC59VC, and the LCD Display # LC27VC. The # LC59VC is specifically designed to snap into an existing Tire Linc docking station, so you are absolutely on the right track with using the dock already installed on your Montana.

The problem is that just those individual pieces will cost you more than going with the complete kit and adding what you need, and we haven't even added the tools from the kit to our site yet.

So, if it were me, I would go with the first option. You will save some money, get all eight sensors and the monitor you are looking for, and you can hang onto that extra docking station and any other extra pieces as backups. You never know when one of those might come in handy!

Also, I cannot put prices in my answers, you will need to add them items to the cart, I'm really sorry about that.

Is this your first 5th wheel, or just upgrading? Where did you go, or where are you taking it for it's for adventure?

expert reply by: Kate F

0

Don T.

9/10/2026

+Thanks for your help.

Kate F.

9/10/2026

@DonT My pleasure Don!

Answer 1

Hey Dave! The LCD Display for Tire Linc Pro RV TPMS #LC27VC only works with the Tire Linc Pro. What you can do is replace your existing Tire Linc with the Upgrade Kit for Older Tire Linc TPMS #LC59VC. This is compatible with the old sensors so you…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

What Do I Need to Add 8 Tire Linc Pro Sensors to a Prepped Keystone Montana?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching