Are you certain it is a Pollak PA66-ND40 as opposed to a Pollak PA66-MD40? The only reason I ask is we do have a replacement for the MD40, which is the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket #PK11893-11933 which we know has been…
The Tie-Downs for the Reese Elite for the Ram trucks are indeed sold separately as part #RP30145. They are sold individually, so you'll need two of them. The tie downs are intended to be used in the rear pucks, according to Reese.
The MORryde Suspension Upgrade Kit for Triple Axle Trailers part #MR86ZR for 2-1/4" or part #MR26ZR for 3-1/8" is an upgrade kit you can use to obtain thicker shackles. It also comes with new bushings and wet bolts which will really give…
The brake assemblies you have are Dexter 12 inch assemblies with a 7k capacity. That means the current part numbers you would want are #23-464 for the left hand side and part #23-465 for the right hand side. The part #23-464-465 that you referenced…
Trailer suspension isn't an exact science so it's typically best to stick with the same spacing for your components so that the suspension can travel properly. The the equalizer and shackle straps need to form a "W" shape when…
I attached a picture that has all of the dimensions for the mounting bracket of the #HM48470 for you to check out. You can see that the hole diameter is 2-1/8 inches and the distance between all of the mounting holes which the 7-way would need to…
You'll have to get me the bolt pattern and tire size that is stamped on the sidewall of what you currently have on your trailer for me to determine what the correct spare would be.
I spoke with my contact at Pollak and he stated that the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, #PK11893-11933 is the correct replacement part for the Pollak PA66-MD40 that you have.
If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.
The Curt hitch bar part #C55NR that you referenced doesn't have a listed weight capacity since a lot of that will be based on how it's installed. Since this is a 3 inch hitch opening the capacity is going to be very high so I wouldn't…
There is! To replace the standard pin and clip on the Curt QuickPin No Latch A-Frame Trailer Coupler #C84DR Curt actually recommend the Hitch Lock #C23025 which is what I recommend going with!
This A-Frame Trailer Coupler w/ Round Jack Hole #CA-5280-RB is manufactured in China. We do have similar options like the Buyers Products A-Frame Trailer Coupler w Jack Hole #3370091595 and Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole…
Filter Results
