Dimensions of Buyers Products Hitch Plate 3371809060A

Question

Question:

Do you have detailed dimensions for this hitch plate? I believe this is best option for my modified chassis cab frame accommodating actual location of leaf hangars and bump stop brackets. Im not concerned holes lining up because they will not due to shortened frame but I like the Ford version has cutouts allowing plate to slide inside of chassis cab frame and make welding much stronger, versus dodge version without frame cutouts. Thanks in advance for assistance, its always helpful.

asked by: Chris

0

Expert Reply:

Yes we do; I have added a photo below for you of the dimensions of the Buyers Products Hitch Plate with 2" Receiver Tube - Ford # 3371809060A.

expert reply by: Kyle S

0

Dimensions of Buyers Products Hitch Plate 3371809060A
(click to enlarge)

Answer 1

The Buyers Products Hitch Plate with 2" Receiver Tube - Ford #3371809060A will fit Ford models F350/F450/F550 but is designed for the cab and chassis models so if you have the regular pickup bed this may not work and you'll want to consult…

view full answer...

Answer 2

The side plates in the Curt Class 5 Universal Weld-on Hitch #C87CR have only been tested by Curt in the vertical position. With that they are not sure how the mounting brackets will hold up if mounted horizontally. I recommend the Buyers Products…

view full answer...

Answer 3

Yes, the Buyers Products Hitch Plate part #3371809060A fits the Ford 550 cab and chassis as long as the frame measures 34 inches wide.

view full answer...

Answer 4

The Buyers Products Hitch Plate with Pintle Mount to fit GM C4500/C5500 part #3371809039A measures 62-1/2" long edge to edge and 22" tall. It fits 3" frame widths. I have attached a diagram of all of the measurements of the pintle hook…

view full answer...

Answer 5

Hi Cody; Buyers Products was unable to confirm if the #3371809060A could fit your 1990 Ford F-Superduty. What you can do is look at the measurements below to see if they line up with what you have. If not, you could use one of the following universal…

view full answer...

Answer 6

The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the #3371809065 below for your reference.

view full answer...

Answer 7

As long as your truck originally was a cab and chassis model of truck before the dump bed was installed the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC #3371809065 that you referenced would fit and work well.

view full answer...

Answer 8

Are you saying you only have 12 inches of vertical room to work with to install the part #3371809065? Or where exactly is the 12 inch limitation?

view full answer...

Answer 9

I checked with Buyers Products and the overall length of the Hitch Plate part #3371809065 is 62 inches, height is 17 inches and width is 7-1/4 inch. The weight is 102 lbs.

view full answer...

Answer 10

Since you have a C4500 the correct Buyers Products Hitch Plate with Pintle Mount would actually be the part #3371809039A as the #3371809065 is for the 3500 model trucks.

view full answer...

Answer 11

The factory plug to plug in the brake controller is hidden a little more on the 2005 Ford F-250 Super Duty. You will have to look behind a black pocket beneath the radio in the center of the dash. I have included a link to a video that shows where…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Dimensions of Buyers Products Hitch Plate 3371809060A

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching