Replacement Window And Channel Trim For A 1983 Carriage Town Chariot

Updated 12/19/2024 | Published 12/14/2024

Products Featured in This Question

etrailer Rubber Hitch Cover for 2" Trailer Hitches - Qty 1

(3317)

$14.00

Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding - 30' Long x 5/8" Tall

(113)

$111.89

Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 3/4" Tall

(116)

$118.29

Question:

we are restoring a 1983 carriage town chariot. it has all the rubber around window and on windows that need replaced. they is also rubber seals that cover all the screws on the exterior walls. can not find the right fit for any of it

asked by: Paula J

Expert Reply:

Hey Paula,

To find the correct replacement trim pieces for your trailer we'll need to know the profile and dimensions of the both the window seals and the channel. If you pop out the window seal a bit you should be able to see its profile and take a couple of measurements on it. I've attached the profile of part # SR63FR as an example.

For the channel trim you just need to measure how wide it is to find the correct replacement. The tracks are typically about 1/2", 3/4", or 1" wide and usually have the same rounded profile so this is pretty easy to figure out. I've attached a picture of part # SR45ZR as an example.

Let me know what you find and I'd be happy to help.

expert reply by: Kevin C

SR45ZR profile
(click to enlarge)

SR63FR profile
(click to enlarge)

Paula C.

12/16/2024

I could send old pieces of what I need to see if you have it?

Kevin C.

12/19/2024

@PaulaC We haven't had anyone mail in parts this way before but we could definitely try it. The address is 1507 State Hwy A, Wentzville, MO 63385 and you can right "ATTEN: Returns" and then under that "ATTEN: Kevin" and when ever it gets to them they can notify me. You can also just send me some pictures of the seal profiles if that's easier for you.