Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
view full answer...Suspension enhancement systems like Timbren springs are perfect for the scenaro you're describing. These solutions supplement your factory suspension but don't necessarily increase your capacity. Timbrens are hollow rubber springs that sit…
view full answer...With your tongue weight at 1,175 lbs when loaded, you also need to account for any cargo weight behind the rear axle as well to get the total tongue weight rating. I've attached an article to assist. You are correct that your current system is…
view full answer...In terms of speed rating the Goodyear Endurance ST205/75R14 Radial Trailer Tire is certainly superior to the Kenda Karrier #AM10235, as it features an 87 mph maximum speed (compared to 81 mph on the Kenda). Based on your question, where it seems like…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...When it comes to hitches that we have available for your 2020 Honda Passport that can be used with a weight distribution system, the Draw-Tite #76290 is a confirmed fit for your new Passport and can be used with weight distribution systems like the…
view full answer...Hi Al; we don't have any kind of package price but I can answer your questions. The #76290 will work well but the etrailer #e44AR will help save you some extra money. The only difference between the two is the capacity. It looks like the 2019…
view full answer...The reason you cannot back up with friction sway control like the Curt #17200 installed on your travel trailer with a single 3500lb axle is when turning sharply the bar will be extended or compressed to far which can cause the mounting bracket on the…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...I recommend the Fastway e2 Weight Distribution System part #FA92-00-0600 with 2" Hitch Ball part #A-90 for a Forest River Rockwood Geo Pro 15TB. In regards to using a weight distribution system, the rule of 10-15% for tongue load will still…
view full answer...The Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW #RP58393 requires positioning on trailer tongue approximately 29 inches back from hitch ball. The Reese Steadi-Flex Weight Distribution System w/ Sway…
view full answer...The Reese Pole-Tongue Adapter for Weight Distribution Systems, item #RP3280, is not designed for use with a friction sway control bar like the Reese friction sway control kit, #83660. The pole tongue adapter is designed for use with a weight…
view full answer...