Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…
view full answer...I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…
view full answer...You actually should shoot for 4-1/2" of clearance between the top of your tire and the bottom of the fender well. This accounts for flex in your suspension. Unless 2,280 lbs is the GVWR (gross vehicle weight rating) of your trailer then you need…
view full answer...The Redline Pre-Drilled Round Rubber Bumper #D2-96 can be installed in a variety of ways depending on the nature of the trailer. The holes are drilled all the way through to allow user-supplied hardware to mount it. We also offer a larger size bumper…
view full answer...The Pre-Drilled Round Rubber Trailer Bumper #D2-96 that you referenced does not come with any metal framing inside of it. I attached a picture the bumper with it flexed to show you it doesn't have anything metal inside of it.
view full answer...The distance from the wheel mounting flange to the rotor mounting flange is 1.89 inches, or 1-57/64 inches. I've attached a photo showing this measurement for you. The hub spacer has an E-coat finish to resist corrosion and is designed for 2,000…
view full answer...The seal replacement for your 22333 kbn is the Grease Seal - Double Lip #GS-2250DL. This is a direct replacement with a 2.250" inner diameter and 3.376" outer diameter.
view full answer...Yes you can replace your Dometic AC unit with the Furrion AC unit and thermostat to control both the AC and Furnace. To accomplish this along with the ac unit you will need the single zone thermostat and single zone controller. I recommend the…
view full answer...I was able to confirm with Furrion that the 165W Solar Panel #FR73SR does not come with mounting hardware included; he also mentioned that they are in the process of re-designing these panels so the brackets they have previously used have been…
view full answer...Yes, I went out to our warehouse for you and can confirm that the Ram Removable, 6" Poly Caster Assembly part #JC-101 will fit the Electric Jack w/ Footplate part #EJ-3520-BBX. Please note that using this wheel on your jack will reduce its…
view full answer...I have good news, our trailer jack that has a 2 inch outer diameter part #DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity…
view full answer...I was able to do a little research and determine your 2007 Palomino Pony 2100 does have the 5 on 4-1/2 inch bolt pattern. I've linked the page to all the 5.30-12 combinations we offer with that bolt pattern to assist. My recommendation is the…
view full answer...Filter Your Search
Contact and Help