Search: tongue jack   >  

Thanks for reaching out, Doran! The toggle switch for your FIC-ETJ3500 is pretty unique and it looks like for a direct replacement you'll need to reach out to FIC Jack Services directly at 1-877-957-1501. You might consider looking at and…

Hey Paul, the most similar weight distribution shank we have to the part #RP69FR that fits a 2-1/2 inch hitch is the part #BPH75RR which fits the same heads as the Reese shanks so it will also work with same heads.

I am attaching a photo of the mounting locations on the Ram Scissor Stabilizer Jack #TJSC-24 that I believe you were referencing. They are from the edges of the mounting holes but I believe your mounting hole locations would match up just fine. Let…

We do carry the Lippert hydraulic pump 172911 with the part number #LC58TF.

Hey Ken, thanks for reaching out! The MORryde ALLTREK 4000 Shock Absorbing Equalizers, 33" Wheelbase #MR89DR or 35" Wheelbase #MR29DR, are a good upgrade to a standard leaf spring suspension and will help to provide a better ride…

Hi Kerry; the 339894 is actually still an active part. The correct replacement motor is the Replacement Electric Motor Assembly for Lippert Coach RV Steps #LC63BX which is the same as the 339894.

The Castle Rock #274-000029 is made by Lionshead Tire and Wheel. These meet all DOT and FMVSS specifications, have a speed rating of 75 mph, and carry a 5 year warranty making them an excellent choice of trailer tire. I included a review of this…

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

Yes, you can! So long as our Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel item #AM30820 is the same size and bolt pattern as what's on your Ironton trailer it can be used not only as a spare but also on your trailer…

The Dutton-Lainson Rigid Mount Marine Jack #DL22507 has an inner diameter of 1 3/4", has an inner post length of 19" and and outer post length of 21 1/4". I've also included the dimensional drawing as well for you…

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

The inlet and discharge threading on the Flow Max RV Fresh Water Pump - 12 Volt #LC689052 is .825 inches using a digital caliper so it is not the 1/2 inch male national pipe thread which would be .840 inches. Lippert recommends using the barb…