Search: slide out awnings   >  

For a similar 60 amp converter that can charge a lithium battery you'd want the part #PD9160ALV but the part #PD9260C can only charge lead acid batteries. There isn't a way to convert what you have to work with lithium batteries.

The correct replacement for your Power Gear 130-1305 is the Lippert #LC368446. I've linked to a product description video for the replacement slide out motor.

For a similar 60 amp converter that can charge a lithium battery you'd want the part #PD9160ALV but the part #PD9260C can only charge lead acid batteries.

The OEM puck system is optional for Ford pickups so the only way to tell if your 2017 Ford F-250 has the puck system or not is to physically look in the bed for the pucks like what you see in the attached photo. If you do have the puck system then…

The left is the idler head side so you're looking for replacement covers for the idler head on your Solera awning, and we do have both the front and back, at the following part numbers: - Replacement Front Cover for Solera Power and…

For the Replacement Cover for Solera Awnings #LC643923 for the idler head, and the Replacement Cover for Solera Awnings #LC643922 for the drive head, you can use the: -Replacement Solera Manual Awning Head Cover Fastener #LC266156, which are #6 x…

A clicking motor on your Tread Lite Electric Double Steps #LC353543 or #LC353621 is indicative there is an issue with the motor not sensing the proper amperage at the end of the extension cycle, which is what tells it to shut off when it is…

Thats definitely a gear box issue. Do you know which specific RV steps you have on your RV?

Sounds like the motor is bad then if the module and wiring is good. If the steps you have are the Lippert Tread Lites like part #LC353543 that you referenced the correct replacement motor would then be the #LC183058. If you have something else let…

It sounds like the brake solenoid on your Lippert Electric Tread Lite Step part #LC353542 is not functioning properly. There is a manual lever on the motor that can sometimes get flipped off which will then not allow the steps to stay extended. In…

To bench test the Motor #LC183058 on your Lippert Electric Tread Lite Step #LC353620 you can simply connect the motor wires a 12 volt battery source to operate the motor. The motor is reverse polarity so you can run it in and out by alternating the…

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…