Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 15'7" from edge to edge. Includes all necessary components.
Features:
Specs:
To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you don't have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage.
If there are two slide-outs next to each other, you will need a total of 14" of clearance between them for them both to have a slide-out awning. Again, you can go down a size if you are low on space.
Without a slide-topper, the roof of your slide-out room is continually exposed and can accumulate leaves and bugs and different types of debris. That debris can build up along the rubber strip at the top of your box, preventing a firm seal when your slide-out is retracted. Rain water can then get in and pool on the top of your slide-out. If you don't clear the water off each time it rains, mold can begin to form. And when your slide-out is pulled in, that mold gets inside your RV.
The Solera RV slide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out. Not only does it prevent debris from collecting on the roof of your slide-out, but it keeps water from pooling and potentially causing damage down the road. Because it mounts directly to the front of the slide box, the slide-out awning is able to automatically extend and retract every time the slide-out room is extended or retracted.
The durable awning fabric holds up to the rigors of the outdoors. It's made of premium 13.5-oz vinyl, which is an upgrade over the 10-oz fabric used in many awnings. This fabric also features heat-welded seams to prevent leaks. And it is made to withstand cold temperatures down to -25 degrees Fahrenheit, so it won't crack or degrade during the winter.
Use the self-tapping screws to secure the included access plate to the side of your slide-out, positioning the plate at the bottom of the T-molding. The two access brackets slide easily onto the access plate's track. The rods that are located at each end of the roller tube, which comes with the awning fabric already mounted, slide through the hole in the two access brackets.
The included awning rail is used to anchor the other side of the fabric to your RV. This rail can be mounted up to 5" above the trim on top of your slide box.
Note: It's important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (1190 Customer Reviews)
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 15'7" from edge to edge. Includes all necessary components.
Other than me making an error while installing these toppers I have had no problems with them and love how they look on my fifth wheel. The video's that e-trailer has for installation are great and would of made this a simple job if I hadn't dropped the ball. Great product and easy to install.
Excellent easy to install
Prompt shipping and tracking info. Only concern was shipping container was in rough shape with damage but product was not damaged.
Easy install and holding up amazingly.
Carol, I wanted to send you photos of how I received my two packages from the freight company. Y'all have been great to deal with but the delivery method needs improving. As long as my awnings are not missing any parts and are not damaged, I will be happy. But I just got back home and found the boxes like this. I thought you would want to know.
This Solera slide out awning is well made and a good design making for a fairly simple and straightforward installation. Pretty much can install the unit with one person up to the point of slide the awning into the awning rail. The one issue I had, hence took one star away, was not enough awning rail screws were sent, I was short 11 screws, only sent 20. The instruction said to put a screw in very hole of the awning rail to camper attachment. So I drilled all the holes for that connection and then was short 11 screws to fill all the holes.
We purchased 4 new awnings for our unit. 3 for slides and 1 for the shade over the entry. We followed the measurement instructions and when we received them 1 unit was too long because it interferred with the awning arms of the shade for the door. I reached out so that we could get a shorter one and the freight was over half the cost of the new awning. We were disappointed with the service at that time. Now a year later another awning has proven to be too long and the bars seem to extend the end caps so far away from the slide that they bend inwards. While we were camping I had to cut away the awning to prevent any additional damage to our slide. So in looking back, I do not feel they have the expertise to accurately sell this product.
The Awning kit was received on time and the installation went smoothly. Very happy with the product.
This awning was packaged well and it arrived undamaged, however, when I took it out of the package the top rail was bent and the groove where the awning slides in was damaged. I was able to open the groove by bending and it was still serviceable. The hardware package had been opened previously, but nothing was missing. On the bead end of the vinyl where it is glued together was not glued properly. It was on the leading end of the awning so it would take a beating while driving. I repaired it with super glue and hopefully it will hold properly. Those are my complaints and why I gave it only 3 stars. On the other hand, the instructions were thorough and easy to follow. The hardware installation was straight forward and was completed without issue.
I have purchased from etrailer for years and have been very satisfied with the service and quality of their products. This one didn’t measure up due to the factors above.
Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.
Perfect fit for my Coachmen Clipper 17BHS slide out. Install was easy with the etrailer install video! They cover every step in the video and explain assembly better than the supplied instructions. Works great at keeping out the leaves, hoping it works to help keep water out of the slide out seams too.
Jo Ann was helpful in the sale of this product. The delivery on the other hand was not what I expected. It was not delivered to my house I like was told. I had to go to the post office to pick it up. Not sure why any company would ship a 7Ft Item by USPS. It did come in one undamaged I am missing some hardware. Will try to get that at the local hardware. That is way the lower score. The topper is very nice.
I am not sure whose fault it was, but it took about 3 months for my order to be completed. It was backordered initially, which is fine, but somehow shipped two weeks early. I get ready to install and realize the awning rail, and half of the screws are missing. It appeared to be an open box item, or maybe items taken, and sent to another customer. Customer service was great, (through the whole process, keeping me informed) and they requested the missing parts, which were also back ordered. Two months later, the parts become available and they ship me another slide topper, with the awning rail, but missing all of the screws again!!!! This required another order to be placed for the screws, which took almost two weeks to arrive. I then needed to return the extra awning with the freight company, which was aggravating because they kept canceling/rescheduling dates. Finally got it all installed which took about an hour. The slide topper looks great now that it’s finally installed!
Product was destroyed in transit. Please refund my money. I will not be interested in further negotiations with e trailer. It seems to be a systematic issue with your choice of transportation vendor. Best wishes.
I'm an RV tech and have installed these before, but this time it was in my own new 5th wheel. My advice, if your RV is slide topper ready, consider putting the slide rail a couple inches higher. I had a feeling it was gonna be an issue and it is. The manufacturer suggested placement is too low and they sit flat and catch even the lightest rain. We just put a beach ball under ours cuz the rain will not run off. Otherwise I'm sure the product is fine, but please take my word for it, there needs to be a higher rise for the rain to dry. I raised our last RV toppers and no issues at highway speeds. I wish the manufacturer would actually test their product and installation instructions before putting it on the market.
To start , let me say that ETRAILER has done their part by replacing an awning that had a factory tear in it . This slide topper I bought is 13 ft. long and not for the faint of heart to install by their self . I installed mine by hanging some rope hoops from the ceiling of my barn . It took me about 3 hours , not bad for an 80 year old guy .
Your choice of LTL carrier is poor at best. They arrived a week later than what they originally scheduled. All 3 packing tubes that the slide toppers were shipped in were damaged. Off loading and inspecting was a challenge in 106deg heat and a busy roadway. Did manage to confirm that the hardware kits were still intact. As for tube damage we will see what they look like during install this weekend
Everything was fine except one of the parts received was incorrect. This may have been due to a fault with the manufacturer. The bracket and extension bar were incompatible. Once reported customer service took care to correct the problem.
I like this cover that keeps trash and thermal sun load off my slide out roof. The wind and rain puddle are downers but the benefits outweigh these. I am considering a middle roller.
While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
A friend and I installed this topper today on a Winnebago 2101DS travel trailer. It took a little over one hour and we didn't run into any real problems. One thing the instructions said to do was to mount the hex aluminum bar in the end bracket using a self tapping 1/4-20 screw. Seemed almost impossible to do so I used a 1/4-20 tap. Worked fine.
Once the slide topper is squared away and goes in and out properly the paper instructions want you to install a black self tapping screw in the fabric slot within 1" of the end of the fabric. I didn't like the idea of running the screw through the fabric. I had some black tubing from another project which I used for the block to keep the slide fabric from moving.
The topper seems to be high quality and certainly will provide additional protection from the elements. This is definitely a two man job and my friend was great help. When we were sliding the fabric into the slide topper rail we found the best way was for me to be on the roof supporting the topper while my friend guided the fabric into the rail slot.
After searching the internet and checking reviews I chose etrailer for my slide out awning. I have shopped at Camping World who had the same awning but a lower price. After contacting etrailer with their price match I got the awning plus a few dollars less shipped to my door! Communications were excellent!
The installation was straight forward with ample instructions. The mounting brackets for the slide out has two positions, an upper and lower to provide clearance between the roll and top of the slide out. I used the upper. Hardware was great quality. There is ample adjustments in the brackets side to side if needed. My trailer a 2020 Aspen Trail 2750BH has the “C” rail as part of the gutter so I didn’t need to install the one provided with the awning! My wife and I installed the awning with two ladders and did not have any problems. Make sure and use the silicone spray as it really makes the awning easy to slide thru the C channel. We are happy with our purchase and will definitely use etrailer for our needs! Thank you for a quality product!
Funny, I do not know where to start. I have purchased from Etrailer for years always great products always good. Service. I am very disappointed in my last two orders. I am still waiting on the replacement hoses from the previous order and not a word. I am still waiting on two items in this order no idea. I received one of the three today. Have not opened it yet. The shipping has been terrible except for the delivery driver he was great. I have always been willing to pay a little more if the service was good. etrailer missed the mark on both of these orders. Very disappointing. I will comment on the awnings later.
I measured per instructions but when we began to install it was too long due to the existing awning to shade the side of the camper. Unfortunately, we had to reorder, pay freight and received one too short to cover the entire slide-out. instructions do not take into consideration that us DYI people were not told to look at impediments that the arms of the awning would hit. Tough lesson to learn. So buyers beware. I could have tolerated this mistake with consideration of a discount for the second one...
Do you have a question about this RV Awning?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.