Search: single axle brake line kit   >  

For a replacement I recommend the Dexter DX7.5L A-60 Brake Actuator #DX27FR. The swing-away actuators like your old A60 have been discontinued, along with replacement parts, so this is the best solution. This features a 7,500 lb trailer capacity,…

I would check first to see if you do have brake flanges before going forward buying parts because if you do that would make it pretty easy. Otherwise you could look into having flanges welded on as that's an option too. We have them with…

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

Brake parts are manufactured with one of several different finishes - raw metal, e-coat, silver cadmium, or Dacromet or they are made entirely of stainless steel. Parts vary in price and in the degree of resistance to corrosion, depending on the…

It's a wire color difference but not a function difference on the pins of the 7-way. The difference comes from the fact that the two different styles are representative of two different areas that uses trailers. Traditional is usually seen on…

The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…

We carry two trailer hitch receivers that fit your 2017 Volkswagen Jetta; a Draw-Tite, part #24926, and a Curt, part #C11474. With both hitches you can see the cross tube under the Jetta's rear bumper. I've attached pictures of each…

I checked with Draw-Tite and yes it will. The Draw-Tite Trailer Hitch item #DT73QR is confirmed to fit the hybrid model of the 2023 Lexus RX 350. This hitch is custom fit and bolts to your vehicle with included hardware.

The Kodiak disc brake kit part #k2hr35d that you referenced is compatible with the 84 spindle which has a dimensions of 1.06 for the bearing surface closest to the threads, 1.38 inches for the other bearing surface and then for the grease seal it…

Parts #K2HR35D and #K2R35D accomplish the same thing and have the same ratings but they fit differently applications. If you take a look at the pictures I've attached, part #K2HR35D is a complete kit with hubs and rotors where part #K2R35D does…

For a completely stainless steel version of the Kodiak Disc Brake Kit part #K2HR35D you will want to use the Kodiak Disc Brake Kit part #K2R35S. You will also need an idler hub like the Kodiak Trailer Hub part #KH84545S as the stainless steel version…

Brake lines don't have to be difficult to run. I recommend the Kodiak Hydraulic Brake Line Kit - Single Axle - 18' #18SI-BLKIT. This will give you one 18 foot flexible line and one 7 foot line and one 1-1/2 foot long line along with the tee…