Stainless Steel Disc Brakes for 3,500 Lb. Axles with a 5 on 4-1/2" Bolt Pattern
Updated 11/02/2017 | Published 11/01/2017
Products Featured in This Question
Question:
is there a stainless steel version for # K2HR35D
asked by: Jabazz S
Expert Reply:
For a completely stainless steel version of the Kodiak Disc Brake Kit part # K2HR35D you will want to use the Kodiak Disc Brake Kit part # K2R35S. You will also need an idler hub like the Kodiak Trailer Hub part # KH84545S as the stainless steel version of this kit is only offered with the rotor and not the hub/rotor assembly.
If you want the hub/rotor disc brake kit in stainless steel then the only option I have for you is the Kodiak Disc Brake Kit part # K2HR35DS which is a combination of both dacromet and stainless steel. The hub/rotors included in this kit have a dacromet coating whereas the calipers and mounting brackets are stainless steel.
Both of the above options use an L68149 inner bearing and a L44649 outer bearing. If you have a different size bearing please let me know and I would be glad to offer a disc brake kit that will work for you.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Search Results: tekonsha p3
- Shop: Brake Controller
- Q&A: Disc Brake Kit With 10 Inch Rotors For Salt Water Use
- Q&A: How to Pick Out Brakes for 3,500 lb Boat Trailer with Tandem Axles
- Q&A: Comparing Demco and Titan Disc Brake Actuators with Electric Lockouts
- Q&A: Is a Parking Brake Required for an Electric Over Hydraulic Trailer Braking Setup
- Q&A: Recommended Installation Screws for 1/2 Inch Metal Loom Clamp # A0500
- Q&A: Difference Between Demco and Dexter Replacement Hydraulic Actuator Shocks
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Complete Breakdown of the Kodiak Disc Brake Kit-K2R35S
- Video: Checking Out the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Video: Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS381-9067 Review
- Video: Detailed Breakdown of the Metal Loom Clamp
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Q&A: Parts Needed To Replace Disc Brake Assemblies On Yamaha Boat Trailer By MFI With 3,700LB Marine Axle
- Article: Which Hitches are Made in the USA
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - OEM - 1,600 psi
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - Slip On Rotor - 5 on 4-1/2 - 3.5K
- Shop: Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi
- Shop: DeeMaxx Stainless Steel Hex Scew w/ Indented Washer - Self-Drilling - 3/8"
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Nerf Bars - Running Boards
- Shop: Trailer Hitch
- Search Results: axle nut
- Search Results: spindle nut
- Search Results: cotter pin
- Search Results: spindle washer
- Search Results: hydraulic brake actuator