Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR for your 2020 Kia Sedona is going to come with a Tekonsha brake controller connector. So you will be able to use any Tekonsha Controller like the P2 #90885 or P3 #90195. Or the Redarc…
view full answer...Yes, if you are not ready to install the Redarc Tow-Pro Elite Brake Controller #RED63RR when you install the Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR on your 2020 Kia Sedona you do not have to install the black battery cable which…
view full answer...The typical tire should run about 158 degrees (Farenheidt) once you get going down the road, but this can vary greatly depending on the weight of the trailer, how fast you're traveling, and also driving habits. So while 158 is probably…
view full answer...If your 2021 Jeep grand Cherokee has 4WD with a 2-speed transfer case then you can flat tow it with all four wheels on the ground. To do so you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the…
view full answer...It does appear you have a Yakima BlackTop Pro cargo carrier. Unfortunately the only replacement part still manufactured for your box is the Replacement Mounting Clamp #Y62XR. You may be able to locate some of the lid supports in good used condition…
view full answer...Lets start with what you need to add to your 2016 Kia Sorento. I have two options for adding a 7-way to your vehicle. If you want a plug and play installation, we have the Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR. This would replace…
view full answer...Yes, your 2019 Kia Sedona without the factory tow package is still compatible with the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter #TK24FR. According to the manufacturer, Tekonsha, this is compatible with all models…
view full answer...It sounds like you're looking for a solution to provide both a 4 way and 7 way trailer connector on the back of a 2021 Kia Sedona, and we've got exactly what you'll need. I'll start out by saying that the Tekonsha #TK24FR you were…
view full answer...I would be happy to help you. We hear this complaint quite often about dealerships not wanting to install after market wiring for random reasons because they want you to purchase theirs usually. The Curt Shock Absorbing Towing Kit w/ Sway Control and…
view full answer...The HD versions of the Timbren kits like the part #ASR2KHDS01 are more intended for off road type use like what you'd be using so this is the kit you'd want. The spindles are actually designed for use with 3,500 lb hub/drums instead for added…
view full answer...Good questions so let's start with the installation of the roof rack feet on your 2019 Toyota Highlander and you do need to install the feet at the locations indicated in the directions, which is what we show in the linked installation video. A…
view full answer...Yes, the Thule Pulse cargo box #TH615 does fit the factory crossbars on your 2011 Honda CR-V. For the box to fit without interference with the rear hatch you would need to have 46-3/8 inches or greater from the center of the front crossbar to the…
view full answer...Filter Your Search
Contact and Help