Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2

See what our Experts say about this Yakima Roof Rack

Will RhinoRack Batwi...

Parts Needed to Inst...

Best Ladder Rack and...

Best Ladder Rack and...

Recommended Ladder R...

Roof Rack for 2015 T...

Will Installing Trac...

Recommended Fairing ...

Recommendations for ...

• Will the Yakima Slim Shady Fit on Yakima HD Cross Bars
  Yes the Replacement Clamp Assembly for Yakima SlimShady Roll-Out Awning part # 8880737 will work out well with the Yakima HD Bars like part # Y01157. The clamps are designed to work with crossbars up to 1 1/2" tall which is what the Yakima HD's are.
  view full answer...
• Weight Capacity of Yakima Roof Rack on 2019 Ford Expedition
  You are correct that the TimberLine Towers # Y00147 limit your weight capacity over the Yakima Crossbars # Y01157, but in this case it is actually your vehicle's roof load capacity that is the real limit. Based on my research, a 2019 Ford Expedition has a roof load capacity of 125 lbs if you have a moonroof and/or 20 inch wheels, otherwise it has a roof load capacity of 200 lbs. Check your vehicle owner's manual to make sure. Since the weight capacity of your vehicle is lower than the capacity...
  view full answer...
• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Can I Use a 60-Inch Overhaul HD Ladder Rack on My 2021 Ford Ranger?
  You can definitely buy the OutPost HD uprights and 60-inch crossbars for your 2021 Ford Ranger. I confirmed with Yakima that you can use this length of crossbars for either a 5-foot or 6-foot bed. For that set, you need the following parts: - Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights # Y01151 - Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y01157
  view full answer...
• Recommended Yakima Ladder Rack for my 2020 Ram 1500 and my Retrax XR Tonneau Cover Rails
  The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover part # Y01151-5755 is exactly what you will need to add a rack to your 2020 Ram 1500. These will allow you to adjust the bars between 19" and 30" in height from the top of your bed rails to adjust to your needs.
  view full answer...
• Does Mounting Kit for Thule Flat Top Ski Carrier Fit Yakima HD Crossbars
  The Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998 is designed to work on crossbars that are narrower than 3-3/4 inches, and since the Yakima HD Crossbars like the 55 inch # Y01156 and 60 inch # Y01157 are 3 inches wide, the Mounting Kit will absolutely work with the HD Crossbars. I have added a link below to a video review for you to check out if you'd like of the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998.
  view full answer...
• Can Accessories Be Installed In Bottom Channels On Yakima HD Crossbars
  In regards to Yakima HD Crossbars like part # Y01157, you can secure accessories in both the top and bottom channels. These channels are pretty much a standard size so you can use track mounted accessories from pretty much any brand such as Thule, Rhino-Rack, Rola, Etc. The T-Bolt Kit part # THXADAPT12 would work for custom applications. That said, there isn't an exact size nut that must be used inside the channels.
  view full answer...
• Compatibility of Rhino-Rack Cargo Basket RMCB02 with Yakima HD Crossbars
  The Yakima HD Crossbars like # Y01157 will allow you to use the Rhino-Rack Roof Mounted Steel Cargo Basket - 57" Long x 42" Wide - 165 lbs # RMCB02 if you use longer screws as you referenced as the width of the crossbar will work with the mount, but the depth is 1/4 inches too large for the factory hardware to fit.
  view full answer...
• Can I Mount The Rhino-Rack Batwing To A Yakima HD Crossbar
  You will not need a special mounting kit. The Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft, part # RR33200, mounts via the t-channels in crossbars. The Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y01157, have t-channels with the same dimensions of the Rhino-Rack Vortex crossbars. You will just need to make sure your crossbars extend beyond the Yakima tower. I have included a product description link and video review links below.
  view full answer...
• Does The Replacement T-Bolt For Thule TracRac And Xsporter Ladder Racks Fit The Yakima HD Crossbars
  Yes, the Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Racks # 853-5715 will fit into the cross bar channels of Yakima HD Crossbars like # Y01157.
  view full answer...
• Roof Rack For Roof Top Tent On A 2007 FJ Cruiser
  Since your roof rack on your 2007 FJ Cruiser is rather large compared to others, I recommend getting the Yakima HD Crossbars # Y01157 with these feet # Y00147. They wrap around your factory roof rails and will ensure a tight fit. You'll need these adapters # Y03541 for the feet to connect properly to the HD bars. This is the strongest bar setup and is the best for a Roof Top Tent Setup. Since you have a roof rack, you won't be able to get a platform on your roof and these HD bars are built...
  view full answer...
• Is the Yakima Aero Crossbar SmarT-Slot Kit 2 Compatible w/ Yakima HD Crossbars and the FatCat EVO 4
  Yes, the Aero Crossbar SmarT-Slot Kit 2 for Yakima FatCat Ski and Snowboard Carriers # Y03098 will work with Yakima HD Crossbars Aero Crossbars # Y01157 and the Yakima FatCat EVO4 # Y03095. The SmarT-slot kit is designed to mount your FatCat EVO 4 to T-slotted crossbars, the Yakima HD Crossbars are T-slotted crossbars so this is exactly what you need.
  view full answer...
• Can I Use a Rhino Rack Hi-Lift Jack/Shovel Mount on Yakima HD Crossbars
  We conducted a test using the Yakima HD Crossbars # Y01156 and # Y01157, and the Rhino Rack Hi-Lift Jacks # RR43157. I have attached links to these products. I had these parts ordered from the warehouse and sent to our Installer with substantial experience with these products to test fit these for you. In his report he said, "The answer is yes - kind of. The shim will fit into the T-track channel and mount to the bar, BUT the piece of metal that the Shovel Holder uses is rectangular,...
  view full answer...
• Which Bars Do I Need For Yakima BedRock HD Towers for Truck Bed Rails
  The Yakima BedRock HD Towers part # Y01160 for Truck Bed Rails will only work with the Yakima HD crossbars part # Y01156 for 55" part # Y01157 for 60" and part # Y01158 for 68" bars so the Thule Xsporter bars would not be compatible.
  view full answer...
• Can the Yakima OutPost HD Truck Bed Ladder Rack Be Used with a Toolbox
  Yes, you can position the uprights on the Yakima OutPost HD Mid-Height Truck Bed Ladder Rack Towers part # Y01152 further in so that you have room for your crossover style toolbox. The crossbar spread is pretty much up to you and what you are carrying. Please note the above system does not come with crossbars so you will need to purchase these separately. For this, we have part # Y01157 for mid-size trucks or part # Y01159 for full-size trucks. If you have a Nissan or Toyota with the track...
  view full answer...
• Are Thule Accessories Compatible With Yakima HD Crossbars
  The Yakima HD Crossbars are 3" wide x 1-1/2" tall, so most Thule accessories are compatible with them, so long as the Thule accessories mount to channels or bars of that width (you didn't mention the specific accessory for me to verify). The Yakima HD crossbars come in a number of different lengths: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159 I have added a link...
  view full answer...
• Can Older Yakima Q-Tower Round Bar Roof Rack Be Used on 2017 GMC Sierra
  By clips, I'm assuming you mean the vehicle specific portion of a roof rack that fastens the foot pack to the vehicle. Unfortunately, Yakima discontinued their Q Towers a couple of years ago, and the currently available vehicle clips aren't compatible with your older towers. The good news is that you would be able to reuse your existing crossbars, but you'd need the following updated parts to use them on your 2017 GMC Sierra 2500: Yakima BaseLine Towers, part # Y00146 Round Bar Adapters,...
  view full answer...
• Roof Rack Recommendation for 2017 Jeep Grand Cherokee Trailhawk
  For your 2017 Jeep Grand Cherokee Trailhawk that has the factory black roof rails the best roof rack for carrying a roof top tent is the Yakima HD roof rack part numbers # Y01157, # Y00146, # Y03541, and # Y06121 which gives you a very high quality roof rack with higher capacity load bars that are also aerodynamically shaped as well.
  view full answer...
• Weight Capacity of the Yakima HD Crossbars
  The Yakima HD Crossbar Set, part # Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part # YA34FR, states that its weight capacity is 500 lbs because these bars are intended to be used as a set (either with the same one or with another HD bar of a different length). Even with just the 500 lbs, this number is more than likely much higher than you can put on the top of your vehicle. Though these crossbars...
  view full answer...
• Can I Fit Four Pair Of J-Style Carriers On Top Of My 2013 GMC Yukon?
  You could possibly fit four of the # S65148 on your roof but it will be a pain to load majority of your kayaks up there. There is a better solution I found that will be more user friendly. You are going to need a large roof rack bar to accommodate your 4 kayaks. I suggest the Yakima 60" HD Bars # Y01157 and If you have factory side rails you will need the Yakima SkyLine Towers # Y00148 along with the Side Rail Adapter # Y03541 and Landing Pad # Y00221. If you have factory raised rails...
  view full answer...
• Can I Use Shorter HD Crossbars On My Yakima OverHaul HD For My 2015 Toyota Tacoma
  Your 2015 Toyota Tacoma's truckbed has two vehicle styles, one with a Deck Rail System and one without. There are two different Yakima ladder racks that are compatible, one for each truck bed option. They are as follows. If your truck has the Deck Rail System, the ladder rack that is compatible is the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks - 500 lbs - 68" Bars, part # Y01151-5868. If you do not have the Deck Rail System on your Tacoma, your ladder rack...
  view full answer...
• Ladder Rack Compatibility on 2010 Toyota Tundra with Hard Tonneau Cover with Track System
  The Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs # 59799 will fit on a 2010 Toyota Tundra without the tonneau cover in place but not with it installed. For a track system on a hard tonneau you can use the Yakima Overhaul HD Adjustable Truck Bed Rack # Y01151 which is compatible with the track rails. Then you can use the separate crossbars available in the following lengths: 55"--Y01156 60"--Y01157 68"--Y01158 78"--Y01159 The weight capacity on the rack will be...
  view full answer...
• Rola Sport Roof Rack for a 2012 Honda Pilot
  I have a solution for you, but unfortunately the Rola Sport Extended Series Roof Rack with APE Mounting System, part # 59834 is not a fit for the 2012 Honda Pilot LX with a naked roof. Instead, you'll want the Yamika Roof rack consisting of these parts: # Y01157, # Y00146, # Y03541, # Y06183 . This will provide a roof rack for your vehicle.
  view full answer...
• BaseClip Fit Kit for a Yakima Roof Rack on a 2022 Ford F-150
  I would be happy to help you. To attach the BaseLine Towers for Yakima Crossbars item # Y00146 to your 2022 Ford F-150 naked roof you will need the following parts: HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y27FR The correct crossbars are item # Y01157.
  view full answer...

Do you have a question about this Roof Rack?