bing tracking image
  1. Roof Rack
  2. Rhino Rack
  3. Crossbars
  4. Aero Bars
  5. Black
  6. Locks Included
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2
10% Money Back Rebate on Rhino Rack Products

Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2

Item # RRVA126B-2
lowest price pledge
Our Price: $190.00
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
In Stock
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your . Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included. Lowest Prices for the best roof rack from Rhino Rack. Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 part number RRVA126B-2 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (2282)
  • Q & A (0)
  • Photos
  • Why etrailer?

2018 BMW 3 Series - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2

  • Crossbars
  • Aero Bars
  • Rhino Rack
  • Black
  • Locks Included
  • Aluminum

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your . Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.


Features:

  • Sleek, low-profile crossbars let you build an aftermarket roof rack for your vehicle
    • Rhino-Rack legs and custom fit kit (sold separately) create a complete roof rack
  • Slim, elliptical crossbar shape helps to create an extremely aerodynamic system
  • Full-length bars extend past roof rack legs to maximize space for carriers and accessories
  • Top channel in each bar lets you add channel-mounted carriers and accessories
    • Clamp-on accessories mount conveniently around bars
  • Rubberized Vortex strips in top channels dramatically reduce drag and wind noise
    • Keep dirt and grime out of crossbars
    • Provide cushioning and slip resistance for your cargo
  • Bottom channels allow easy installation to Rhino-Rack roof rack legs
    • Rulers in channels help to center crossbar on your roof
  • Lightweight, structural-grade anodized aluminum bars are rustproof
    • Internal H-shaped extrusion provides exceptional bar strength
  • Plastic lock cores with universal keys deter theft of channel-mounted accessories
    • Can be upgraded to all-metal locks (RRVA-LEC4 - sold separately) for added security
  • Matte black finish


Specs:

  • Quantity: 2 crossbars
  • Weight capacity: 165 lbs
  • Dimensions: 49" long x 3-1/8" wide x 1-3/16" tall
  • Limited lifetime warranty


Rhino-Rack Vortex Aero crossbar

These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 4 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.


Aerodynamic Design

Vortex Aero noise-reducing top channel strips

The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.


Strong, Durable Construction

Vortex Aero crossbar H-shaped extrusion

The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.


No-Hassle Installation

Rhino-Rack Vortex Aero bottom channel ruler

Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.


Channel-Mounted and Clamp-On Accessories

Rhino-Rack Vortex Aero crossbar top-channel strips

Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.


You can also attach most clamp-on accessories to the bars, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on them.


Built-In Security

Rhino-Rack Vortex Aero Secure Core locking endcaps

Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC4 - sold separately).



VA126B Rhino Rack Vortex Aero Aluminum Cross Bars - Black - 49" Long - Qty 2




Customer Reviews

Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 - RRVA126B-2

Average Customer Rating:  4.7 out of 5 stars   (2282 Customer Reviews)

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

by:

Love these aero bars. Perfect for on my 2018 Grand Cherokee Trailhawk. Run fairly quiet and perform as expected. As always the customer service from etrailer was top notch.




by:

Looks a great and we’re super easy to install.
2021
Jeep Grand Cherokee L 4x4 Limited




by:

The quality is very good. Ordering was easy and installation using the video made the process so simple. Glad I order them from here instead of somewhere else.




by:

Indeed they were the wrong parts in the box marked demo on them.
The new parts came and I was able to
Put it on my car with no problem!!

Thank you for listening to me and helping me problem solve. It looks great on my car and I'm ready to load the kayaks now!!

Kalie is a gal that sent me some return labels so I'm going to put that on the box and send it back to you guys!




by:
Chevrolet Equinox

Excellent system. Little to no wind noise. Measurements to mount the rear bar to the 2020 Equinox are incorrect in the instructions but easy to adjust to an exact fit.




by:

Easy to install. The pins on the legs clamp perfectly into the fixed points on the car's flush rails. This is a nice low profile set up. The top of the crossbar is about 4" above the roof glass and does not interfere with opening the sunroof. This is a very sturdy setup for our Thule Motion XT XL. etrailer shipped extremely fast. Very pleased with my purchase.




by:

I use this on my 2016 Ford Focus sedan. It's awesome. Only issue I had is that with my canoe strapped down, the rubber strip collapsed down into the t track where the gunwale pressed on it, after a few months of use. I realized that 3/8 diameter rod, or stiff plastic tubing, was perfectly sized so that it could be laid in the track with the rubber strip installed normally over it. The tubing supports the rubber strip and keeps it from collapsing under the clamping pressure. Overall, this is a great system. Very solid and quiet.




by:
Toyota RAV4

Bought these to go on our RAV4 Prime. They look much better than the standard Toyota racks, were easy to install, and have stood the test of time a year later (making it through a New England winter just fine). we’ve used them to hold a Yakima Rocketbox without problems.




by:

Hello sorry for the late response/review. I would have to rate the rhino rack set up a 3.5 The measurements to set the feet up and the video that was previously sent was not for my 2022 honda accord.


Comments
I think I understand what you might be seeing. The roof rack set is a fit for the model years of 18 - 22 and the videos are on a 2010 - 2017 model Accord where the fit kit would be different. I apologize that the videos are incorrect and I am working towards having them removed. As for the instructions, as long as you received the manual for fit kit part DK511 then it is correct. I know that it says date of 12-19 however since this fits model years 18 - 22 for the Honda Accord then the manufacturer tends to update the instructions when there is a change. I double checked the manufacturer site and the manual we have is the most current.
-- Etrailer Expert Jenny N - 07/08/2022


by:
2012 BMW X3

I purchased this kit along with the aero bars for my 2012 BMW X3. Great product and appears solid. I relied heavily on the you tube install video that saved me a considerable amount of time. Would definitely purchase again for future vehicles.


Comments
Racks worked great! Connected a rooftop large Yakima storage unit . Very stable, secure and easy on and off. Racks performed well.
Dean - 05/20/2022


by:

I bought this item because I wanted a quiet low-profile bar. unfortunately, this bar is incredibly loud and whistles. I've reached out to Rhino Rack and etrailer and have received no responses. Would not recommend this product.


Comments
The Vortex Aero bars are typically some of the quietest roof rack crossbars available on the market. What WILL cause them to whistle as you describe is if the rubber strips that fill the channels on top of and on the underside of the crossbars arent completely filling the accessory slots. An open gap of even a 14 inch can produce a harmonic that will produce a whistle such as you describe. Id recommend making sure that these strips are in place and are COMPLETELY filling the slots on top of and on the underside surface of the crossbars. Once thats done, you should be good to go.
-- Etrailer Expert Mike L - 09/02/2022


by:
2014 Jeep Grand Cherokee

The bars to the job as far as carrying the load, but there's a big difference between "wind noise" and "an extremely annoying whistling". Wind going over the bars makes a very annoying whistling noise and there seems to be no fix other than purchasing additional wind deflection products.


Comments
One thing to check is making sure the rubber strips are covering any holes will help with whistling noises. And then if you did end up wanting a wind fairing like part # RRRF2
Rhino-Rack Fairing for Roof Racks - 38" Long
$104.00
, that would also help cut down on the noise.
-- Etrailer Expert Brooke M - 06/14/2022


by:

etrailer.com's videos and additional customer support made the purchase of a Rhino Rack system from them for our 2010 Malibu a no brainer. The rack fit the car perfectly, and with the videos and clear instructions that came with the kit, I got it installed on the car with only one misstep. The instructions came the the measurements in centimeters and inches. I didn't have a metric tape measure, and ended up messing up converting fractions to decimal.
My Daughter is going to college 500 miles away and is moving into an unfurnished apartment and needed to pick up some small furniture that wouldn't fit in her Malibu. She purchased several items from Facebook Marketplace and was able to transport a twin bed and mattress, a medium sized desk and some dining room chairs (in several trips) with no problems.
The only thing I can think of to improve the installation would be to have the Inches measurements in decimal or to include an inexpensive metric tape.


Comments
Still rock solid after a year. Very happy with the Rack. My daughter has used it from time to time over the past year when something wont fit in her car, and shes had no problems with it at all.
Mark - 08/20/2020


by:
Pontiac Trans Sport Van

Awesome product, worth the extra money, safely transport two kayaks on the roof on the interstate no problem.


Comments
One year later they still look and preform perfectly, great product
Nicholas - 06/06/2022
One year later they still look and preform perfectly, great product
Nicholas - 06/06/2022


by:

This product is not what I thought it was. It only contains bars and not the leg kit or base kit which are not listed anywhere on the website.


Comments
Our roof rack systems will generally have three different parts to make the whole system. The bars, the legs or towers, and the fit kit. For a 2017 Chevrolet Cruze hatchback Rhino Rack system, you would need part # RRVA126B-2
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2
$190.00
, part # RRRLKVA
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
$182.31
, and part # DK489
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
$105.00
. You can also see it installed on a 2015 Chevrolet Cruze hatchback in the link below.
-- Etrailer Expert Jenny N - 07/19/2022


by:

I wish the vortex strip came pre installed. Kind of a pain to take the additional time to install it yourself. Had a hard time getting it in the rails at certain points.


Comments
The vortex strip is not pre-installed because this roof rack fits on a variety of different vehicles and the feet will be adjusted in different positions depending on the vehicle. If the channel is not all of the way covered you may notice wind noise. In this instance, you can purchase an extra strip with item # RRM626
Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars - 15-3/4" Long - Qty 1
$2.89
.
-- Etrailer Expert Sierra K - 05/11/2022


by:
2022 Subaru Outback Wagon

Install was relatively easy aside from the rubber vortex strips. These come packaged inside the crossbars when shipped. This caused the key for the end caps to become stuck inside one of the crossbars and it was a terrible hassle trying to get it out. Pushing it caused it to jam further with the rubber strips surrounding it. Once that hassle was over the process of actually installing the strips on the bars was also a pain. Other than that the bars seem to be good quality and installing with the legs was easy.




by:

You have to order the cross bars and connector hardware separately. I also ordered the end cap locks.

I consider myself a pretty good DYI person and it took longer than I expected according to other reviews on here to get everything installed and overlapping the same on both sides.

Once installed the crossbars are very solid. I do get noticeable wind noise at say 70+MPH.

I installed these on a 2020 Jeep GC Overland and they look and function great! Was a bit concerned about the sun roof retraction with the bars, but there is plenty of clearance. No issue.

I for sure recommend the Rhino Rail crossbars. Etrailer is a great site to get the bars. Given the COVID issues and supply chain breakdowns retailers are facing, they still had everything I ordered to me in a very reasonable time frame.




by:

The rack fits well and looks good but it has a whistle. It’s common with racks to have that problem but how hard would it be for rack manufacturers to engineer a rack that won’t make noise? There are videos on YouTube showing people doing all kinds of rigging on the crossbars to stop the noise- if they can do it why can’t the manufacturers do it? Why should I have to wrap tape and cords and all kinds of other crap to the crossbars to fix it?




by:

Function perfect minus one small problem. There all some plastic pieces that pop into the bottom when you're done installing. If I had to guess one of them popped out during a drive-thru car wash. For about two weeks we kept hearing a low whistle noise at higher speeds or windy days. Finally figured out the plastic pieces prevent that wind whistle noise. Luckily the crossbars come with a some extras. Installed those back in and haven't had an issue since. 2018 Kia Niro.




by:

worked well, solid construction.




by:
2014 Subaru Forester

These crossbars were easy to install, are sturdy when installed and look great on my factory side rails when installed with the SX Series legs. The standard end caps are an all-plastic affair and use a little key to engage a cam lock. That plus the distance from the end of the crossbar to the nut that tightens the foot onto the rail keeps things relatively secure. Most people probably want to opt for proper locking end caps, though.

The rubber vortex strips look nice and give items something grippy to rest on. I haven't tried a load test yet but did drive around in moderate wind on the highway in multiple directions. Other than a slight whistle at 70 mph, you'd never know they were there. Overall, real happy with the product and looking forward to hauling some stuff around with them.




by:
2009 Honda Civic

Great sturdy rack. I put it together myself and have already started using it. I was concerned that it would cause leaks in the door the way it has to mount..but its Florida and its rainfall in the past few days and no leak! The weak link would be the end caps..two do not lock on and im concerned the will fly off at some point.


Comments
Its still attached to my car and still doing its job. I did lose an end cap and had to order 2 as a pair . I dont remember the amount but the were expensive as replacementsespecially since i knew it would happen
Roseanne - 08/12/2015


by:

My inital thought of these crossbars were that they were going to be too small. Two of the other big makers call for 53" min and 60" recommended. However after installing, 49" is a perfect fit for the Cayenne I feel. The rack is extremely quiet (make sure you use the channel rubber on top and bottom) The Cayenne is fairly quiet car inside and it was one of my big concerns but I only hear what sounds like a slight rush of air, no buzzing or whistling at all.

The downside to this rack is I think the black paint is too thin. Just laying it on the pavement while setting up caused scratches to appear. Silver would be the way to go if your getting these, or spray them plastic.




by:
2007 Honda Civic

My Rhino-Rack Aero 2500 roof racks fit solidly on my 2007 Honda Civic EX. I was really impressed with the construction and strength of the rack system. Also the versatility of the 'legs' with a swivel pad allow them to fit any roof pitch perfectly. The clamps are so solid, nothing could knock these racks off. I added a paddleboard attachment and went surfing today. The black racks also look great with the black trim on my silver Honda. Great product at a much better price than Yakima or Thule.



25
2291
Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack



  • Installation of Rhino-Rack Roof Rack on 2017 Honda Civic Hatchback
    For installation of your Rhino-Rack on your 2017 Honda Civic Hatchback, you will actually want to install your front crossbar first and then install the rear crossbar based on that location. You will want to measure from the seam between your drivers door and passenger door 250mm or 9-27/32 inches and that will be the center of your crossbar. Match that on your passenger side. Then you will want to measure from the center of that crossbar back 650mm or 25-19/32 inches to the center of...
    view full answer...
    Image 1 for
  • What is the Weight Capacity of a 2014 Kia Sorento Factory Roof Rack
    I checked the owners manual for a 2014 Kia Sorento and it indicates that the roof rack capacity is 220 pounds, evenly distributed. You will want to double check your owners manual just to be on the safe side. If you do not have crossbars then you can add some. It does sound like you at least have the side rails that run front to back. I have included links to the roof rack crossbars that will fit. It appears that for 2014 Sorentos there are raised side rails and flush side rails. the...
    view full answer...
  • Will the Thule Hull-A-Port XT Fit on Rhino-Rack Vortex Aero Crossbars?
    Yes, the Thule Hull-A-Port XT will be able to clamp onto the Rhino-Rack Vortex Aero Crossbars. If you need a complete roof rack system to allow you to mount your crossbars and transport the Hull-A-Port, I would be happy to assist you if reply back with the year/make/model of your vehicle.
    view full answer...
  • Which Rhino Rack Cross Bars For Rhino Rack Tracks Mounted 31-1/2" Apart
    You're correct that you'll have 300mm (11.8") of space in the channels under the bars and this number is standard across all of their crossbars. For that reason I recommend using the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 # RRVA126B-2 you were looking at, since they'll be the longest bars you can mount with only 31-1/2" space between your tracks. These Vortex Aero crossbars will do a good job at reducing some of the wind noise that is associated with roof...
    view full answer...
  • Will Roof Rack From 2016 Mercedes-Benz E-Class Fit a 2015 Mercedes-Benz E-Class
    I'm not too well-versed with the Mercedes-Benz E-Class but from my understanding the W213 is the 2016 model year of your 2015 Mercedes-Benz E250. It looks like the fits are the same from the 2015 to 2016 model years as long as the vehicles have the same style. I'm adding links to the fitguide for both for you to reference, but if you have specific part numbers in mind just let me know what they are and I can let you know what they will fit.
    view full answer...
  • Replacement Endcap For Rhino Rack Vortex Aero Crossbars
    I didn't find anything regarding M840, but it looks like your 2020 Kia Stinger most likely has Rhino-Rack Vortex Aero Crossbars Silver # RRVA126S-2 or Rhino-Rack Vortex Aero Crossbars Black # RRVA126B-2. For either crossbar, use Rhino-Rack Locking Endcaps for Vortex Aero Crossbars # RRVA-LEC4 for 4 locking endcaps. If this is not what you are looking for, then feel free to give me some more information and I would be happy to help track down what you are needing. I have attached a video...
    view full answer...
  • Can RhinoRack Roof Rack on 2013 Mazda 3 be Moved to 2018 Model?
    Your 2013 Mazda was the last year of the 2nd generation of the vehicle, and the 2018 is the last year of the 4th generation, so things on the newer vehicle are different. According to my research, the fixed points on the 2018 Mazda 3 are different, so you'd need a different bolt kit and because the roof is a bit wider, you'll need crossbars that are at least 49 inches in length. The crossbars are part # RRVA126S-2 for sliver or # RRVA126B-2 for black. The bolt kit is part # DK410. You...
    view full answer...
  • Recommended Roof Rack for 2008 Audi A6 Avant Wagon with Integrated Locks
    The Whispbar Fit Kit that you referenced does not feature an integrated lock core that allows you to secure the roof rack to your vehicle's roof. The particular model you mentioned is just the Fit Kit portion of a roof rack assembly and is designed to fit certain model years of the Chevy Silverado and GMC Sierra so it will not work on your 2008 Audi A6 Avant Wagon. For a really nice roof rack system that includes locks to help deter theft and is confirmed to fit your Audi with flush rails,...
    view full answer...
  • Will Rhino-Rack Roof Rack Fit 2018 Toyota 4Runner with Raised Side Rails
    Based on the stock photo you sent, it sounds like you are looking for a roof rack that will work on a 2018 Toyota 4Runner with raised side rails that run front to back. There is a great option from Rhino-Rack though not using the specific part you asked about. Instead, you will need the following parts: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 (Black) or # RRVA126S-2 (Silver) - Rhino-Rack SX Series Legs # RRSX100 This roof rack uses aerodynamic bars that have rubber vortex strips...
    view full answer...
    Image 1 for
  • Aerodynamic Roof Rack for a 2016 Mitsubishi Outlander Sport with Flush Side Rails
    I have just what you are looking for to add a roof rack to your 2016 Mitsubishi Outlander Sport with the flush side rails. You can use a Rhino-Rack Vortex roof rack using black bars # RRVA126B-2 or silver bars # RRVA126S-2. And then you would just need the foot pack # RRSX031. This system is only a fraction of the price of other major brands and maintains all of the quality. I have linked a video review for you.
    view full answer...
  • Rhino-Rack Roof Rack Fits on 2014 Audi Q7 with Panoramic Sunroof
    The Rhino-Rack Vortex Aero roof rack system that fits your 2014 Audi Q7 fits all versions of the car so long as it has the flush mounted rails that run front to back. Your panoramic sunroof is not a problem with either the silver or the black crossbar rack system. If you prefer the silver bar system you will want to order parts # RRVA126S-2 and # RRSX027. If you prefer black bars then order parts # RRVA126B-2 and # RRSX027. An installation video is linked for your reference.
    view full answer...
  • Aftermarket Roof Rack for 2017 Kia Sportage with Factory-Installed Flush Side Rails
    The linked page displays all aftermarket roof rack options for the 2017 Kia Sportage that has factory-installed flush side rails on the roof. Among the options the best value in my opinion comes from the Rhino-Rack Vortex system. We offer this in both black (parts # RRVA126B-2 and # RRSX023) and silver (parts # RRVA126S-2 and # RRSX023). These racks' elliptical bars will generate less noise than round or square bars and you can see the installation process on a Kia vehicle in the linked video.
    view full answer...
  • Does Rhino Rack Vortex Rack Fit a 2016 Kia Sorento with Sunroof and Side Rails
    For your 2017 Kia Sorento the Rhino Rack # RRVA126B-2 and # RRSX023 is a confirmed fit. It will also allow the sunroof to open since the bars will be high enough not to interfere. I pulled up pictures of your vehicle with the sunroof open and it does not stick up hardly at all. You should note that with the roof rack installed there will be quite a bit of wind noise with the sunroof open.
    view full answer...
  • What is Needed For Roof Rack on 2011 BMW X3 w/ Flush Mount Rails
    To add a roof rack to your 2011 BMW X3 with flush mounted rails you just need a couple parts, which are the feet that attach to the rails, and the crossbars. The best option for this is a roof rack from Rhino-Rack, and the correct fit for your X3 is the following: - Rhino-Rack Vortex Aero Crossbars - Silver # RRVA126S-2 or Black # RRVA126B-2 - Rhino-Rack SRB Legs for Vortex Aero Crossbars - Flush Factory Side Rails # RRSX026 The reason I like Rhino-Rack the best is because it is the...
    view full answer...
  • Rhino-Rack Roof Rack Fit on 2022 Subaru Forester Wilderness With Raised Side Rails
    Yes, there is a Rhino-Rack roof rack that fits your 2022 Subaru Forester Wilderness with raised side rails, and I verified for you that the correct parts for your Subaru are the following: - Rhino-Rack Vortex Aero Crossbars - Silver # RRVA126S-2 or Black # RRVA126B-2 - Rhino-Rack SX Series Legs for Vortex Aero Crossbars # RRSX100 The crossbars and legs are the only parts you need for your Forester for the complete rack, and you made a really nice choice with this system. The reason for...
    view full answer...
  • Roof Rack For 2022 Subaru Forester Wilderness That Allows Sunroof to Open
    We do have a roof rack that will fit the raised side rails of your 2022 Subaru Forester Wilderness and allow the sunroof to open without any interference whatsoever; the rack is from Rhino-Rack and made up of the following parts: - Rhino-Rack Vortex Aero Crossbars - Silver # RRVA126S-2 or Black # RRVA126B-2 - Rhino-Rack SX Series Legs # RRSX100 When we test fit this rack on a Forester we found there was about 3 inches of space from the roof to the bottom of the crossbars, which is more...
    view full answer...
  • How to Prevent Crossbar Whistling with Rhino Rack Aero Crossbars
    The bottom of the Rhino Rack Vortex crossbars do have openings in them which can cause whistling. The openings are typically due to the measurement sections that get removed for securing the bar to the feet. Best solution is a fairing which will direct air over the bars and prevent the whistling. For that we have the part # RRRF2 which would fit well for the part # RRVA126B-2 that you have.
    view full answer...
  • Roof Rack Recommendation for 2015 Mitsubish Lancer 4 Door with Naked Roof
    The Rola rack you referenced is for the 5 door version of your 2015 Mitsubishi Lancer. Since you have the 4 door you'd instead want the Rhino Rack part numbers # RRVA126B-2, # RRRLKVA and # DK126 which is a confirmed fit and would work well.
    view full answer...
  • Troubleshooting Plastic Endcaps That Won't Stay In Place On Rhino-Rack Vortex Crossbars
    Regarding the endcaps popping out on your Rhino-Rack Vortex Aero Crossbars - 49" # RRVA126B-2, this is not a common occurrence and I have not heard of this happening before. Make sure the rubber strip, or anything else for that matter, is not getting caught between the crossbar and endcap. Then make sure you are fully pushing the plastic endcaps into place and locking them all the way with the included key. If you are still having issues then let me know and we can dig deeper into the issues...
    view full answer...
  • What is the Best Roof Rack for a Cadillac ATS Coupe?
    We have a wide range of roof kits that you can obtain for the 2016 Cadillac ATS Coupe. I recommend the Rhino-Rack Vortex Aero Crossbars. These racks are designed with aerodynamics in mind and come in black and silver. You will want to obtain the kit that includes: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver, part # RRVA126S-2 - Rhino-Rack 2500 Series Legs for Aero Crossbars, part # RRRLKVA - Rhino-Rack Custom DK Fit Kit for Rhino Rack 2500 Series Legs, part # DK355 Using...
    view full answer...
  • Economical Rack Option for a Ski Rack on a 2014 Ford Fusion
    For your 2014 Ford Fusion, an economical and compatible rack for your ski rack is the Rhino Rack Vortex kit, consisting of: Rhino-Rack Vortex Aero Crossbars, 49 inches, Silver, part # RRVA126S-2 or Black, part # RRVA126B-2 Rhino-Rack Vortex 2500 Series Legs, part # RRRLKVA Rhino-Rack Fit Kit for 2500 Series, part # DK358 These bars have a channel on the top that you can use to mount your ski rack in.
    view full answer...
  • Roof Rack Recommendation for a Roof Top Tent on a 2014 Nissan Rogue
    For your 2014 Nissan Rogue, I recommend the Rhino Rack Vortex Aero kit, consisting of: Rhino Rack Vortex Aero bars, 49 inches, Silver, part # RRVA126S-2, or Black, part # RRVA126B-2 Rhino Rack 2500 Legs for Vortex Bars, part # RRRLKVA Rhino Rack DK Fit Kit for 2500 Series, part # DK396 This is a great kit for your application because the bars are supported from underneath. Though this isn't a completely permanent kit (It uses clamps) it does have supported bars, a key feature for roof...
    view full answer...
  • Roof Rack Recommendation for 2011 Audi A8L
    Rhino-Rack offers roof racks that are compatible with the long wheelbase model of your 2011 Audi A8. I'd recommend the Vortex Aero crossbar roof rack which consists of the following parts: 49 inch long Vortex Aero Crossbars, part # RRVA126B-2 for black or # RRVA126S-2 for silver Roof rack legs, part # RRRLKVA Vehicle specific clamp kit, part # DK314
    view full answer...
  • Roof Rack Recommendation for a 2017 Volkswagen Passat
    Yes, you can install a Rhino-Rack roof rack on your 2017 Volkswagen Passat with naked roof. First, I recommend the Rhino-Rack Vortex crossbars # RRVA126B-2. They are aerodynamic and light weight. They are also available in silver, # RRVA126S-2. For a leg kit to mount the bars to I recommend # RRRLKVA and for a custom clamp kit to attach to the roof I recommend # DK323. I have linked a video showing and example installation for you.
    view full answer...


< Previous
123. . .42



Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Andrew K
Video by:
Andrew K
Employee Robert G
Video by:
Robert G
Employee Jonathan Y
Video by:
Jonathan Y
Employee Adam E
Video by:
Adam E
Employee Aidan B
Video by:
Aidan B
Employee John S
Video by:
John S
Employee Thomas T
Video by:
Thomas T
Employee Schuyler H
Video by:
Schuyler H
Employee Charles A
Video by:
Charles A
Employee Tyler C
Edited by:
Tyler C
Employee Colin H
Test Fit:
Colin H
Employee Randy B
Test Fit:
Randy B
Employee Hayden R
Test Fit:
Hayden R
Employee Keith V
Test Fit:
Keith V
Employee Jared G
Test Fit:
Jared G
Employee Savanna B
Test Fit:
Savanna B
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Clayton O
Test Fit:
Clayton O
Employee Robert O
Test Fit:
Robert O
Employee Evangeline M
Test Fit:
Evangeline M
Employee Adele M
Updated by:
Adele M
Employee Alex H
Updated by:
Alex H
Employee Cole B
Installed by:
Cole B
Employee Brian B
Written by:
Brian B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830