Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
First thing you will need to do is check that all of the wiring of the actuator and your brake controller are correct. I attached a couple diagrams that should be helpful I spoke with my contact at Dexter and there is a way to troubleshoot your…
view full answer...While we do have the disc brake hub and rotor for a 3,500 lb axle, we do not offer torsion axles, or any axles of the length you need. But for the hub and rotor brake kit that has a 5 on 4-1/2" bolt pattern and works with 14"…
view full answer...The mounting brackets of the Kodiak kit like the #K2R526D and the Dexter kit part #K71-647-648 locate the caliper relative to the hub in a slightly different position as well as use different bolt hole dimensions. Because of this the two kits…
view full answer...The big difference is that the #HS381-8066 is for marine applications so that means it has stainless steel hardware and a marine grade gasket which allows it to stand up a lot better to corrosion than the #HBA-12.
view full answer...You are correct that there is only one fluid outlet on the coupler, part #T4750800 you referenced. This is the master cylinder on the coupler that sends fluid through the brake lines to the brakes. I have attached a photo of the coupler that shows…
view full answer...Yes, trailer suspension equalizers are measured from hole center to hole center. The 10-1/8-inch dimension provided for the swan-shaped equalizers in kit #AP302-H302 is from the two outside holes as shown in the linked image.
view full answer...The HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness #HS381-9067 is designed to work with an aftermarket electric over hydraulic brake controller. This kit will require you to wire in the components using the wire…
view full answer...The HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes part #HS481-8067 has the factory brake controller adapter included so it will work with any integrated factory trailer brake controller like a 2018 Ford F-150 Raptor.
view full answer...All of the components of the HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 that you referenced install on the trailer side of the towing setup so you wouldn't need anything different from the kit for…
view full answer...You can lock out your surge brake actuator although it's not always the prettiest of solutions. You need to either weld the pieces together or drill holes through it putting in bolts to keep it from moving. It'll work but it…
view full answer...In regards to an electric over hydraulic actuator, the 1,000 psi model is for drum brakes and the 1,200 psi model is for disc brakes. The size of the axle, etc. are not factors. The most popular option we offer is the HydraStar Vented Marine…
view full answer...According to Dexter Axle, their #K71-650 EOH Brake Actuator is compatible will all proportional brake controllers, including the OEM TBC on your 2011 F350.
view full answer...Related Searches
Filter Your Search
Contact and Help