Result: dismount code fbf99

Hey Scott, your 2025 Brinkley comes with Curt axles and while the tag info can be used to ID the stud diameter by getting the serial number to Curt it's not explicitly listed on the axle. It would be a matter of getting them the axle info and…

Hi John, does it current have a brake flange on the axle/axles? Is it single or tandem? Can you tell me the axle capacity?

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

The replacement studs for the trailer hub #8-231-9UC1-EZ are part number #7-262 which overall are 2.7 inches but would stick through the hub 1-1/4 inches past the mounting flange of it.

I have to go off the GM dealership recommendation. If they are saying you need the Hydrastar #HBA-CAM or Dexter #DX35FR adapter module for your factory brake controller to work with your electric over hydraulic brake actuator, then I can't really…

Hey Dennis, the integrated brake controller of your 2024 Chevy Silverado 3500 probably needs to be put in hydraulic mode to work with your trailer brakes if it's not already. If that is not the case let me know what brand of actuator you have and…

Hi Kevin; the answer to your question is yes. The DeeMaxx Disc Brake Kit w/ Actuator #DE66AR will work with your 2024 Ram factory brake controller.

Hey Steven, you generally do not need to replace the wheel studs of your hubs when installing slip on disc kits like the DeeMax part #DE72FR. The rotors are not overly thick and normally trailer hub wheel studs are longer than needed so it's not…

On Dexter axles manufactured after April 2001 you will be able to find the serial number stamped on the rear portion of the axle tube approximately 18" from the passenger side hub. Depending on the condition of the axle you may need some chalk…

The brake caliper mounting bracket that comes with the Titan Premier Disc Brake Kit part #T2HRCM10DAC has a standard four bolt brake mounting flange pattern. This pattern is an industry standard so as long as you have the four hole pattern there will…

Wheel torque specs vary based on stud diameter, wheel diameter and wheel material. The linked chart shows you commonly recommended torque specs for a range of studs and wheels. For 1/2-inch wheel studs and a 14-inch steel trailer wheel you will use a…

First, on kit #80910-T, one end of the flexible hose attaches directly to the brake assembly. You will then route the other end to the steel brake line and use the metal piece with the flared ends to go from the flexible hose to the steel brake line.…