Does DeeMaxx Disc Brake Kit & EOH Actuator Work With 2024 Ram Factory Brake Controller

Question

Question:

does this kit work with 2024 Ram factory brake controller?

asked by: Kevin D

0

Expert Reply:

Hi Kevin; the answer to your question is yes. The DeeMaxx Disc Brake Kit w/ Actuator # DE66AR will work with your 2024 Ram factory brake controller.

expert reply by: Robin H

0

Robin H.

12/15/2025

Hey Kevin, how did things go using the DeeMaxx disc brake kit with your Ram’s factory brake controller? Your update could make it easier for others working with the same setup.

Answer 1

Hey Scott, your 2025 Brinkley comes with Curt axles and while the tag info can be used to ID the stud diameter by getting the serial number to Curt it's not explicitly listed on the axle. It would be a matter of getting them the axle info and…

view full answer...

Answer 2

Hey Dennis, the integrated brake controller of your 2024 Chevy Silverado 3500 probably needs to be put in hydraulic mode to work with your trailer brakes if it's not already. If that is not the case let me know what brand of actuator you have and…

view full answer...

Answer 3

I have to go off the GM dealership recommendation. If they are saying you need the Hydrastar #HBA-CAM or Dexter #DX35FR adapter module for your factory brake controller to work with your electric over hydraulic brake actuator, then I can't really…

view full answer...

Answer 4

Hey Steven, you generally do not need to replace the wheel studs of your hubs when installing slip on disc kits like the DeeMax part #DE72FR. The rotors are not overly thick and normally trailer hub wheel studs are longer than needed so it's not…

view full answer...

Answer 5

The replacement studs for the trailer hub #8-231-9UC1-EZ are part number #7-262 which overall are 2.7 inches but would stick through the hub 1-1/4 inches past the mounting flange of it.

view full answer...

Answer 6

On Dexter axles manufactured after April 2001 you will be able to find the serial number stamped on the rear portion of the axle tube approximately 18" from the passenger side hub. Depending on the condition of the axle you may need some chalk…

view full answer...

Answer 7

Hey Guy, While I can't answer that directly as I don't know what axles you have, I can tell you how to figure out if the right kit for you is the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers #DE66AR. What it comes down to is…

view full answer...

Answer 8

Hey Mark, since we know your trailer has two 7k axles and a bolt pattern of 8 on 6-1/2 inch the correct DeeMax disc brake kit would be the part #DE66AR which comes with everything needed to add electric over hydraulic DeeMax brakes to your trailer.

view full answer...

Answer 9

The Bulldog Jack part #BD182800 that you referenced was made in Mexico so it would work well for what you need. In the attached picture you can see "Made in Mexico" on the sticker label.

view full answer...

Answer 10

Hi Ron; the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers #DE66AR is the correct kit to convert to disc brakes on your 2015 Grand Design Solitude 369RL. It includes the brakes, EOH actuator, and hydraulic lines. The only other thing you…

view full answer...

Answer 11

On your 2018 Montana 3791 RD, with Dexter 7K axles, we do have the parts but not in a kit for axles that large. I recommend the Kodiak Disc Brake Kit - 13" Hub/Rotor - 7,000 lbs #K2HR712D along with Bearing Kit #BK3-100. I recommend using grease…

view full answer...

Answer 12

Hey Michael, Thanks for the serial number of your axle, it made it possible to find the bearings and seal numbers so I could verify what would fit. If you want the best you'll definitely want to go with a DeeMaxx kit like the #DE66AR. This kit…

view full answer...

Does DeeMaxx Disc Brake Kit & EOH Actuator Work With 2024 Ram Factory Brake Controller

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching