Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III

Ask the Experts about this Derale Engine Oil Coolers

• How to Determine if Engine Oil Filter Will Fit 2017 Ford Explorer With 3.5L V6
  The Derale Stacked-Plate Engine Oil Cooler Kit with Sandwich Adapter # D15602 is a great choice for an engine oil cooler for your 2017 Ford Explorer with a 3.5L V6, as it offers a highly effective cooler and its adapter does fit your Explorer's 22 mm x 1.5 mm engine filter threads. It will almost assuredly fit, but in order to determine for certain, you will need to take some measurements just to be sure, and you have a number of possible mounting locations, as you can see in the cut...
  view full answer...
• Is Vehicle Engine Oil Being 225 Degrees Safe
  You are actually totally fine. Engine oil does best when it's temperature is right at 225-230 degrees when the vehicle is at operating temperature so there would be no need to keep it any cooler. Synthetic oils can handle up to 300 degrees without a problem. As long as the coolant temperature is within the correct range (it should be) then you have nothing to worry about. One easy trick to reduce coolant temperatures that you can pull off since you are down south is to replace the coolant...
  view full answer...
• Added Oil Capacity When Installing Derale Oil Cooler Kit # D15602 on 2016 Ram 1500
  I reached out to my contact at Derale and he said installing the Stacked-Plate Engine Oil Cooler Kit # D15602 will add about 6 ounces of oil capacity as well as a little extra for the lines. When changing your oil after installing the cooler you won't need to take apart the unit. You will be able to change the oil on your Ram just like normal. It's not an issue at all (and is completely normal) to have some leftover oil in the system as it simply can't be completely drained. The...
  view full answer...
• Will Derale Oil Cooler Work On 2014 Ram 1500 With Remote Oil Cooler
  In my research I found that the threads on the old filter you said you use has 3/4-16 threads. The Derale Stacked-Plate Engine Oil Cooler Kit # D15602 has a threaded sleeve with those thread dimensions. You would use the sleeve that has he yellow label attached to it. This is a Class lll oil cooler that can lower your oil temperature by as much as 50 degrees so it will work great for your 2014 Ram 1500.
  view full answer...
• Do Thermostatic-Controlled Oil Coolers Allow All Engine Oil to Flow Once Warmed Up
  Without knowing exactly what oil cooler you bought it's hard to say for certain if the sandwich adapter you have operates like you described, but I can say that the norm is that once the oil reaches 180 degrees the adapter allows all of the oil to pass through it and on to the engine cooler.
  view full answer...
• Derale Engine Oil Cooler for 2012 Toyota FJ Cruiser 4x4
  Yes, you can use Derale Oil Cooler kit # D15602 in your FJ Cruiser. A supplementary oil cooler like the Derale # D15602 is a great way to keep your engine oil temperature in the ideal 180 to 200-degree Fahrenheit range. This Class III cooler kit includes a sandwich adapter and a range of sleeve nuts to ensure a proper match to the threads on your oil filter landing (where your oil filter currently mounts). The best place to mount the cooler core is in front of your AC condenser where...
  view full answer...
• Does Derale Stacked Plate Oil Cooler Kit # D15602 Come with Thermostat Bypass
  Yes, the Derale Stacked-Plate Engine Oil Cooler Kit # D15602 that you referenced does have a thermostatic bypass that prevents oil cooler than 180 degrees from going through the cooler which allows the engine to warm up quickly but then stay cooler once operating temperatures have been reached. The oil filter then does attach to the sandwich adapter.
  view full answer...
• Best Engine Oil Cooler for 2015 Ram 1500 5.7 Liter
  Both the Derale # D15405 and # D15602 are great options for your 2015 Ram 1500. Since engine oil coolers are not vehicle specific, either cooler will work well for you. The # D15602 is a stacked-plate design which generally cools faster and more efficiently, which is why it's able to be so much smaller. In terms of efficiency, the stacked-plate design is the best at cooling the engine oil. This oil cooler measures 13 inches wide by 4-9/16 inches tall by 2 inches deep. Since it's smaller...
  view full answer...
• Transmission Cooler Install Video for a 2013 Ford Explorer
  Transmission coolers all install in basically the same way. I attached an install video that shows a similar transmission cooler being installed in a similar Ford Explorer for you to check out to show you the basic idea. You may not have to remove the front bumper like the video shows, but we do that so that we can show you how everything installs easier. I also attached a help article on transmission coolers for you to check out as well.
  view full answer...
• Does Derale Stacked-Plate Engine Oil Cooler # D15602 Have to Install Upright
  The Derale Stacked-Plate Engine Oil Cooler # D15602 can basically be installed in any orientation. It does not have to face a certain direction to function properly as the oil will make its way to the other side of the cooler regardless of how it is positioned.
  view full answer...
• Best Engine Oil Cooler for a 1989 GMC Suburban 1500 with 5.7L V8 Engine
  For your 1989 GMC Suburban 1500 with the 5.7L V8 engine, I recommend using the Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter part # D15602. This kit comes with several different thread adapters but you will need to use the one with a blue paint marking as this is the correct 13/16-16 adapter for you Suburban. The above engine oil cooler kit can cool your vehicle's engine oil up to 50%. The cooler engine oil will prolong the life of your engine in addition to improving...
  view full answer...
• Engine Oil Cooler Recommendation for 2009 Ford Flex
  For an oil cooler for your Ford Flex, I recommend the Derale Stacked-Plate Engine Oil Cooler Kit with Sandwich Adapter, part # D15602. This can reduce engine oil temperature by as much as 50 degrees and includes the complete mounting kit along with the adapters needed for installation. This cooler measures 13 inches wide by 4-9/16 inches tall by 2 inches deep.
  view full answer...
• Small Transmission Cooler Recommendation for a 2013 Ford Explorer
  The cooler that comes with the part # D15602 can be used as a transmission cooler for your 2013 Ford Explorer. Since you do not need the oil cooler parts that come with it you would be better off ordering the part # D51008, two of the part # D98202, rubber hose # D15799, and hose clamps # D13008.
  view full answer...
• Which Provides More Engine Oil Cooling Derale Cooler D15405 or D15602
  The Class V part # D15405 will provide considerable more cooling for your engine oil than the part # D15602 so it will be your best option.
  view full answer...
• Recommended Engine Oil Cooler 2009 Chevy Silverado 1500 4.8L V8
  Generally speaking, the best oil/transmission cooler to use would be the largest one you have space available for in front of the radiator/condenser behind the grill of your 2009 Chevy Silverado 1500. Therefore, as long as you have 13" wide x 4-9/16" tall x 2" deep of space in this location the Derale Plate-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter part # D15602 would do an excellent job of cooling your engine oil. The Derale Oil Cooler Kit comes with everything you will...
  view full answer...
• Will the Derale Stacked Plate Oil Cooler part # D15602 Fit a 2006 Jeep Commander with a 4.7 Liter
  The Derale Stacked Plate Oil Cooler part # D15602 that you referenced will fit your 2006 Jeep Commander. Your 2006 Jeep Commander with a 4.7 liter engine has oil filter threads of 3/4 In -16 which this comes with an adapter for that thread size. This comes with everything needed to complete the install. It comes with the heat exchanger, the lines needed, sandwich adapter, and all fittings.
  view full answer...
• Engine Oil Cooler for a 2010 Honda Accord
  Engine oil coolers are not vehicle specific so can use any one that will fit in the space available in the engine compartment. Based on what I could find on the motor in your 2010 Honda Accord, it uses a 20x1.5mm filter thread and 2-1/2 inch diameter O-ring. For those sizes you will need to use kit # D15604 since the other kit, # D15602, does not have the proper O-ring size. I have included a link to the installation details and a link to our informational article on engine oil coolers...
  view full answer...
• Will the Stacked Plate Engine Oil Cooler part # D15602 fit a 2011 Jeep Grand Cherokee with 5.7 Hemi
  Yes, the Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter # D15602 will fit your 2011 Jeep Grand Cherokee with a 5.7 liter V8. I checked and your oil filter threads are M22 x 1.5 inch like what the adapters of this kit are compatible with.
  view full answer...
• Do Any Factory OEM Components Need to be Replaced to Install Engine Oil Cooler # D15602
  I spoke with my contact at Derale. He stated that you will not have to replace any components to install the Engine Oil Cooler Kit, # D15602. When installing an engine oil cooler, you will need to make sure there is enough room for the sandwich adapter and oil filter. With the adapter in place, the oil filter will stick out about 2 inches further. Make sure you have enough room to remove and reinstall the filter with the adapter in place.
  view full answer...
• Is Derale Oil Cooler D15602 a Good Fit for 2004 Ford F-150 with 5.4 liter Engine
  The Engine Oil Cooler kit part # D15602 is a fit for your 2004 Ford F-150 with a 5.4 liter engine and would work well. We have not heard of this cooler or any other Derale coolers leaking either.
  view full answer...
• What is the Length of the Hose In the Derale Engine Oil Cooler Kit # D15602.
  The hose that is included with the Derale Stacked-Plate Engine Oil Cooler Kit, # D15602, is 10 ft long and has a 1/2 inch inner diameter. We sell 1/2 inch inner diameter hoses individually as well if you need additional length. I have included a link to all of the hoses we sell for you.
  view full answer...
• Engine Oil Cooler Recommendation for a 1996 Nissan Pathfinder
  I would recommend a Derale Stacked-Plate Engine Oil Cooler Kit # D15602 for your 1996 Nissan Pathfinder. Stacked plate coolers are the most efficient style of engine coolers and take up very little space. This cooler comes with multiple thread sizes ensuring that it will work on your vehicle. I attached an FAQ article on oil coolers for you to check out also.
  view full answer...
• Parts Needed to Add a Towing Package to a 2016 Ford Flex
  According to my research you can tow up to 4,500 lbs with your 2016 Ford Flex if you have the Class III Trailer Towing Package (which looks like it includes a 4/7 Way wiring harness, hitch receiver, trailer sway controller, and an engine oil cooler). If you don't have the Class III trailer towing package then you are limited to 2,000 lbs. We have compatible parts to "give" you the Class III trailer towing package but you will need to double check with Ford to make sure that it will still...
  view full answer...
• Parts Needed to Tow Trailer with 2019 Ford Flex
  All of the parts you mentioned are a great towing package for your 2019 Ford Flex and are attached below at the product links. At this time though the Echo # C51180 does not have a way to interface with the Ford Sync display on your vehicle.
  view full answer...
• Is an Oil Cooler Required for Towing with a 2016 Ford Explorer
  I do have the items you will need to tow with your 2016 Ford Explorer but we do not offer complete towing packages. Instead, you will need to purchase the items separately. According to the Ford Trailer Towing Guide, the towing package for the 3.5L V6 engine came with a oil cooler, 7-way trailer connector, and a trailer hitch receiver. The towing package for the 2.5L I4 engine came with a 4-way trailer connector and a trailer hitch receiver. For an oil cooler, I recommend using the Derale...
  view full answer...
• What Is the Difference Between the Derale Stacked-Plate Engine Oil Cooler Kit D15602 and D15605
  The difference between the Derale Stacked-Plate Engine Oil Cooler Kit part # D15602 and part # D15605 is that the former comes with a 2-3/4" o-ring and the latter comes with both a 2-3/4" o-ring and a 3-1/2" o-ring. These o-rings are used to attach the sandwich adapter to the engine block (see photo). The 3-1/2" o-ring is only needed for 1963-2007 GM small block & big block V8 engines.
  view full answer...
• Oil Cooler Recommendations for a 2013 Ford Explorer with a 3.5 Liter
  I did some checking and it looks like the oil filter threads on your 2013 Ford Explorer with a 3.5 liter engine are M22x1.5 mm, so you are going to need an oil cooler that is compatible with this. I would recommend you get the Derale Stacked-Plate Engine Oil Cooler Kit part # D15602. This kit comes with a compatible oil filter sandwich adapter so that it will work for you. This cooler is a stacked plate cooler, which of all the different styles of coolers this is the most efficient. Here...
  view full answer...
• Does the ETBC7 Kit Include Wiring for a 12V Power Lead for Charging RV Battery
  Yes, the Universal Installation Kit # ETBC7 includes a connector that plugs into the 4-Way flat on your 1998 Toyota Tacoma for basic lighting functions, as well as the wiring and hardware needed to get your 7-Way fully functioning. The 10 Gauge Duplex Wire includes 2 wires. One will be routed under the driver side dash and will carry the brake controller signal, like the Prodigy P3 # 90195, and the other will be routed to the battery on your Tacoma for a 12V Power pin on the 7-Way. I have...
  view full answer...
• Transmission and Engine Oil Cooler Recommendation for a 2012 Dodge Grand Caravan
  If you were looking for a transmission cooler for your 2012 Dodge Grand Caravan, then I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler, # D13502, that you referenced. This transmission cooler is rated for up to 6,000 lbs and the ideal installation location is in front of the AC condenser or radiator. The installation process could take some time for someone who does not have experience installing aftermarket coolers in vehicles. For those who are mechanically inclined,...
  view full answer...
• What You Need To Tow A Trailer With A 2017 Toyota Rav4
  In order to tow a trailer with your 2017 Toyota Rav4, you will need a trailer hitch receiver, wiring harness, and ball mount with hitch ball. For this, I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75235 as this hitch receiver has the highest rated weight capacity for all our RAV4 hitches. For a ball mount, I recommend using the Ball Mount 3/4" Rise or 2" Drop part # 2923 with our 2" Hitch Ball - 1" Diameter part # 63845. You will also need a wiring harness...
  view full answer...

Do you have a question about this Engine Oil Cooler?