Hey Deven, thanks for reaching out, and good question. For a 12 volt system, the charge controller can handle one 200 watt panel. For 24v systems it can do two 200 watt panels. So while the kit technically is expandable, with your 12v system, the one…
The Prodigy P2 part #90885 would be a really great option for your 2006 GMC C6500 that has hydraulic brakes. This is widely considered to be the nicest and most reliable controller that would work great for you.
Hi Matt! The #LM48548 inner bearing is typically seen in the AH25555F agricultural hub, but not with an #L44649 outer bearing. This is a very odd hub/spindle you have, especially with that bolt pattern, but I am fairly sure it is a variant of…
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
That's a really good question, and there is a difference between the 7,500 lb Dexter DX7.5L A-60 actuators for disc brakes; the differences are both in what they fit, as well as their length. - 14" Long & Top-Mounted For 3" Wide…
Yes, we do have a 7-way/4-way connector that fits the round connector on your 2017 Chevy Express Van. For that you'd want the part #HM40975. This has a 7-way on one side and a 4-way on the other. I attached an install video for this on a similar…
Hey David, 16" x 6.5" wheels are typically for vehicle use and not trailer so I would double check that you really have those size wheels. 16" x 6" wheels with an 8 on 6-1/2" bolt pattern are much more common. What is the…
Hey there John, I can help you out with this. While we don't have the specific Bulldog inner tube for the Bulldog BX1 Gooseneck Coupler - Adjustable Height - Round - 2-5/16" Ball - 25,000 lbs #BD1289000300, but Bulldog carries it under part…
When measuring our Steel and Diamond Plate trailer fenders we measure overall width, overall length across the diameter of the fender (across the bottom where it would set on the floor) and overall height. So the 16-Gauge Steel, Single-Axle Trailer…
I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram…
I attached a picture I got from Buyers Products that has the dimensions of the Buyers Products Hook and Keeper for Enclosed Trailer Door #BP64FR that has the dimensions you are looking for.
It sounds like you have a spring return Bulldog landing gear jack that has a broken spring and now won't retract when you activate the release lever. I spoke to my contact at Bulldog and he said the springs aren't repairable so you would need…
Filters
